SWorkz S-Lite FOX4x4e User manual

2
INSTRUCTION
Congratulations on your purchase of the new SWORKz 1/10 scale FOX4x4 off-road ready to
run brushless power CAGE buggy.
Please read this manual thoroughly before you attempt to drive your FOX4x4. This manual
contains step-by-step instructions to help you complete, prepare for startup your Buggy.
Updates, setups, and product news will be posted on our website (www.sworkz.com) or
Facebook (SWORKz RC). Check them often.
As always, if you should ever have any questions or need help with your FOX4x4, please
feel free to contact our ofcial SWORKz dealers and distributors. You may also contact us at
anytime for the most up to date information and support.
Introducing the new S-Lite FOX4x4 1/10th scale off-road brushless powered race Cage buggy
from SWORKz. The S-Lite Cage buggy is the RTR version of SWORKz 1/10 buggy.
The FOX4x4 is assembled in the same factory as the SWORKz S350 FOX8e series. The FOX4x4
comes with a pre-painted body and aluminum side plate desert SUV on road tires. This Cage
chassis are built from 2pcs of 2mm aluminum side plates together with plastic chassis side
guards to make a strong cage chassis system. The FOX4x4 is full time 4WD buggy with front
and rear gear differentials.
The front upper and lower A-arms give the buggy a very tough suspension design, The unique
shock positions give the chassis a low CG making it possible to run high speeds on different
road conditions.
The SWORKz design team focused their efforts into the proper weight distribution of the
FOX4x4. Proper weight distribution proved to be instrumental to help ease the setup during
the design and testing phase of the FOX4x4.
Overall, the FOX4x4 is a real fun, quality and performance RC buggy to run.
1. 2pc 2mm aluminum side plates.
2. Full time 4WD transmission with front and rear gear differentials.
3. The front upper and lower A-arms are designed to be durable.
4. Unique shock position.
5. Aluminum side plate desert SUV on road tires.
6. Pre-painted Body Shell.
7. 2.4G Radio System (SW-T1 Radio with USB charge system and Li-Po battery)
8. Comes standard with SWORKz SE-50 50A 1/10 BL ESC (Made by HobbyWing)
9. SWORKz SP-3500 3652 BL MOTOR FOR 1/10 RTR (Made by HobbyWing) motor system.
FOX4x4 Kit Features:

3
WARRANTY
Your SWORKz FOX4x4 RTR warranty covers workmanship and manufacturing
defects of the original and unmodified parts. Warranty claims resulting from
crashes, abuse, improper operation, improper mounting, improper adjustment or
lack of maintenance will not be honored.
Contact your local hobby shop or SWORKz distributor for all claims and
questions. Claims must be well documented. All Claims are subject to expert
examination approval by SWORKz
Specification
Length: 400mm
Width: 248mm
Height: 130mm
Ground Clearance: 28mm
Wheelbase: 275mm
Track: F:207mm /R202mm
Gear Ratio: C:70/22T, F/R 37/11T
Weight: 1500g (without battery)

4
INDEX
This radio controlled racing car is not a toy!
This high-performance R/C model is recommended for ages 14 and above.
INSTRUCTION 2
Warranty 3
INDEX 4
Required Equipment for Operation 5
Operation Guide 6
Assembly Steps 7-32
SWORKz S-Lite FOX4x4 REPLACEMENT PARTS LIST 33-35

5
Charger and LiPo Battery ( Not Included )
Double-sided tape
Paint
Long nose pliers
Modeling knife
Instant cement Thread lock
Included items
Hex wrench
1.5mm
2mm
2.5mm
1.5mm
2mm
2.5mm
Glow plug wrench
Screwdriver
Screwdriver
Included 2.4G Radio Gear Included Sworkz SE-50 50A
ESC system
Wheel & Trigger Type
Receiver
Steering servo
Tools Recommended
Included Sworkz SP-3500 (3652)
Side cutter
Curved scissors
Grease
Required Equipment for Operation

6
Operation Guide
Safety Precautions
The SWORKz FOX4x4 is a high performance radio control model which needs to be operated
with caution and common sense.
The S350 FOX4x4 RTR is not intended for children under the age of 12 without adult
supervision. SWORKz shall not be held liable for any loss or damages, whether direct,
indirect, act of nature, arising from abuse or misuse of this product or any other product
required.
- The LiPO Battery can be dangerous if improperly handled.
- Always keep your LiPO Battery in a cool area and never use it near ames, sparks, or while
smoking.
- Keep your LiPO Battery, and all other ammables, out of the reach of children.
- After running your car, all parts of the Motor and ESC can become extremely hot. Be careful
not to touch these parts.
- This model is controlled by your radio controller and can be vulnerable to interference
from many outside sources. This interference can cause a loss of control so it is necessary to
operate this model in an open area to avoid personal or property damage. Always ensure
turning on your radio rst.
- Keep all the products included in the package out of the reach of children.
- This model contains many fast rotating parts. Never touch them during operation.
- Follow the instructions included with your radio gear.
- Never operate your model near people or property. The speed of this model has the
potential to injure people and or damage property if misused.
- Always use original SWORKz spare parts and option parts.
- Always ensure that the buggy is in proper working condition before use.
- Always exercise caution when using any tools.
overturn
Assemble for
4 sets
Assemble for
2 sets
Assemble both left
and right sides
Assemble in the
specied order
Assemble front
and rear
Thread Locking
Compound
Grease Pure Silicone Oil

Front and Rear Differentials
1A - Grub Screw w/Threadlock 4x4mm -- 4
1B - Pin 3x19.8mm -- 2
1C - F/H Tapping Screw 2x12mm -- 8
1D - Shim 5x12x0.3mm -- 6
1E - Shim 8x12x0.3mm -- 2
Differential Oil -- 1
1F - Ball Bearing 8x14x4mm -- 4
For Front and Rear (x2)
1C
SW-VX144
1A
1E
1F
SW-EL22811
(37T)
1D
1D
SW-CB156
1B
Differential Oil
SW-EL2228
1F
SW-VX144
1A
Front Differential Housing
2B - Round Head Tapping Screw 3x10 mm -- 5
2C - Ball Bearing 5x10x4mm -- 2
2C
Step 1
(Front)
Step 2-1
SW-EL22891
<2-1>
SW-EL22821
2A
2C
2A - Pin 1.5x7.8mm -- 1
2B
SW-EL1631
3
Step 1
SW-CB156
SW-CB156
SW-CB156
Step 2
(11T)
SW-EL1631

Front Differential Housing
Step 2
SW-EL162D7RE
3A
3A
SW-VX103
3B
3A - Button Head Tapping Screw 3x8mm -- 4
3B - Grub Screw w/Threadlock 4x4mm -- 1
Rear Differential Housing
SW-EL22821
SW-EL22901
4A
4C
4B
SW-EL1631
Step 1
(Rear)
SW-EL1631
4C
Step 4-1
<4-1>
4A - Pin 1.5x7.8mm -- 1
4B - Round Head Tapping Screw 3x8mm -- 5
4C - Ball Bearing 5x10x4mm -- 2
4
Step 3
SW-EL162D7RE
Step 4

Main Gear and Main Gear Mounting
5A - E-Ring 4mm -- 1
5B - Pin 2x9.8mm -- 1
5C - F/H Tapping Screw 3x7mm -- 3
5D - Button Head Tapping Screw 3x8mm -- 4
Step 4
SW-EL162D7RE
5D
5D
5A
5B
5C
SW-
EL0061
(70T)
SW-EL0061
(SW-EL00612)
Motor
6A - Grub Screw w/Threadlock 3x3mm -- 1
6B - Grub Screw w/Threadlock 4x3mm -- 1
6C - Button Head Screw w/Threadlock 3x8mm -- 2
Motor
6B
6A
Step 5
6C
SW-EL0221
SW-EL3045
6D - Ball Bearing 5x10x4mm -- 1
6D
SW-VX103
5
!Please Insert a sheet of notebook
paper to set the motor pinion gear
with the main gear mesh.
Step 5
SW-EL162D7RE
Step 6

Servo Saver
SW-EL30731
SW-EL3701
SW-VA30751RE
(SW-VA30751RE)
7A - Tapping Screw 3x6mm -- 2
7B - Button Head Machine Screw w/Threadlock 3x6mm -- 2
7B
Steering Tie-Rods
SW-CB113
SW-CB159
SW-CB160
26mm
For Right and Left Sides (x2)
<8-1>
Step 8-1
Step 7
Step 8-1
8A - Button Head Tapping Screw 3x15mm -- 2
8A
6
<7-1>
Step 7-1
(Right)
Step 7-1
(Left)
Step 7
SW-EL30731
SW-EL30731
SW-EL30731
SW-EL30731
SW-EL3701
SW-EL3701
SW-EL30761RE
7A
7A
(SW-VA30751RE)
Step 8
SW-CB113
SW-CB159

Steering Servo Tie-RodsRods
SW-V22151
SW-CB159
9A
<9-1>
Step 9-1
9B
9C
Servo Arm
(Included with Servo)
9B - Button Head Machine Screw 3x12mm -- 1
9A - Grub Screw 3x12mm -- 1
9C - Lock Nut 3mm -- 1
10B - Lock Nut 3mm -- 1
10A - Button Head Machine Screw 3x15mm -- 1
Step 9
10A
10B
Step 8
Servo Saver
7
Step 9
SW-CB159
SW-V22151
Step 10

The Left Side Body
SW-EL3024
SW-EL1652
SW-CB305
SW-EL3002LBA
11A - Button Head Machine Screw w/Threadlock 3x6mm -- 3
11B - Button Head Tapping Screw 3x8mm -- 3
11B
11B
11A
11A
11A
11B
The Right Side Body
SW-EL3002RBA
SW-EL3024
SW-EL3101
SW-EL3746
12A - Button Head Tapping Screw 3x8mm -- 6
12B - Button Head Tapping Screw 3x10mm -- 1
12A
12A
12A
12B
8
Step 11
SW-EL3024
SW-CB305
SW-CB305
Step 12
SW-EL3024
SW-EL3024
SW-EL3024
SW-EL3101

Servo Saver and Side Body Mounting
Step10
Step11
Step12
!Pillars need to pass through
the left & right Side Body.
9
Step 13

The Left & Right Side Body Mounting
Step 13
14A
14A
14A
14B
14A - Button Head Machine Screw w/Threadlock 3x6mm -- 3
!Side body unfinished,
Right side screw shortly not locking.
Front Differential Housing and Side Body Mounting
Step 14
Step 3
(Front)
15A
15A
15A - Button Head Tapping Screw 3x8mm -- 2
10
14B - Button Head Tapping Screw 3x8mm -- 1
Step 14
Step 15

Front Differential Housing and Side Body Mounting
16A - Button Head Tapping Screw 3x8mm -- 2
Step 15
16A
16A
Rear Differential Housing and Side Body Mounting
17A - Button Head Tapping Screw 3x8mm -- 5
Step 6
Step 16
SW-EL3553
17A
17A
!Side body unfinished,
Right side screw shortly not locking.
11
Step 16
Step 17

Rear Differential Housing and Side Body Mounting
18A - Button Head Tapping Screw 3x8mm -- 3
Step 17
18A
18A
18A
!Side body unfinished,
Right side screw shortly not locking.
Side Body Fixed
Step 18
SW-EL3002
!Left & right side body slight to
pull out mounting fixed stand.
12
Step 18
Step 19
SW-EL3002

The Right Side Body Mounting
Front CVD and Steering Knuckles
21A - Grub Screw w/Glue 3x2.6mm -- 4
21B - Pin 2x9.8mm -- 2
21C - Pin 2x11mm -- 2
21D - Ball Bearing 5x10x4mm -- 4
21A
21A
21B
21C
21D
21D
SW-VA134
SW-V2357L
SW-V21071
!Side body mount complete,
Right sided screw locking.
For Right and Left Sides (x2)
13
Step 20
Step 21
SW-V2357L
SW-V2357L

Front Upper, Lower Suspension Arms and CVD
SW-CB113
SW-EL349F2
SW-CB113
SW-EL347F2
For Right and Left Sides (x2)
<22-1>
<22-2>
Step 22-1
(L)
Step 22-1
(R)
Step 21
Step 21
Step 22-2
Step 22-2
22A - Button Head Machine Screw w/Threadlock 3x12mm -- 4
22A
22A
22A
22A
Rear Hubs
23A - Pin 2x9.8mm -- 2
23B - Ball Bearing 5x10x4mm -- 4
23A
23B
23B
SW-V21071
SW-V21051
SW-VA3461
For Left Side
For Right Side
14
Step 22
SW-CB113
(R)
SW-EL349F2
(L)
Step 23

Rear Upper, Lower Suspension Arms and Hubs
SW-EL349R2
(R)
SW-CB113
<24-1>
Front
Step 24-1
(R)
Step 24-1
(L)
Step 23
(R)
Step 23
(L)
SW-EL347R2
24A - Hub Studs 3x13.5mm -- 2
24B - Hub Studs 3x27mm -- 2
24B
24A
25B - Hub Studs 3x27mm -- 2
25C - Button Head Tapping Screw 3x12mm -- 1
25D - F/H Tapping Screw 3x8mm -- 1
25A - Cap Screw 3x50mm -- 2
Front Suspension and Bumper Mounting
25A
25B
Step 22
(R)
Step 22
(L)
Step 20
25C
25D
SW-EL1404
15
Step 24
Step 25
SW-EL349R2
(L)
SW-CB113
SW-EL347R2

26A - Button Head Machine Screw w/Threadlock 3x12mm -- 2
26B - Button Head Machine Screw w/Threadlock 3x8mm -- 2
Rear Suspension and Bumper Mounting
27B - Hub Studs 3x27mm -- 2
27C - Button Head Tapping Screw 3x12mm -- 1
27D - F/H Tapping Screw 3x8mm -- 1
27A - Cap Screw 3x50mm -- 2
Steering Tie-Rods Mounting
Step 25
26A
26A
26B
SW-EL30761RE
Step 26
Step 24
(L)
Step 24
(R)
SW-EL3553
27D
27B
27A
27C
SW-EL1404
16
Step 26
Step 27