2
INSTRUCTION
During the early 2015 Reedy race, SWORKz has developed and prepared a new concept S104 EVO for
our brand ambassador Atsushi Hara to race with.
The revised S104 has new parts similar to that of the SWORKz 1/8 FCSS and EVO II system. It is equipped
with brand new shocks and has new suspension geometry. The centre diff is standard but can also be
The S104 EVO comes with new stronger arms to better its overall balance and performance
Using our 1/8th buggy material knowledge we produced the S104 EVO series. We believe the S104 EVO
S104 EVO 4WD buggy with its FCSS chassis design comes standard with the SWORKz X-system
transmission that provides excellent car acceleration. Equipped with New Big Bore Shocks and 3 oil
following the pivot ball steering system as our 1/8s to give the driver a good feel of the S104 buggy.
The SWORKz S104 EVO 4WD buggy with a stiff 7075 aluminum chassis design, comes standard with
SWORKz X-system transmission system. Equipped with full option aluminum parts, Big Bore Shocks
steering system from SWORKz 1/8th EVO II buggy, it gives the driver a good feel of the S104 buggy.
CNC gear system and CVD drive shafts.
14mm hex wheel hubs are used so that the wheel can last when using the high power brushless motors.
Congratulations on your purchase of the new SWORKz S104 EVO 1/10 scale off-road racing buggy pro kit.
Updates, setups, and product news will be posted on our website (www.sworkz.com), so check often.
As always, if you should ever have any questions or need help with your S104 EVO, please feel free to
contact our official SWORKz dealers and distributors, as they will be glad to help you. You may also
contact us at any time for the most up to date information and support.
1. Standard with SWORKz X-System transmission gear system.
2. New Full Oil System Big Bore Shocks.
4. SWORKz F.C.S.S. with B.H.C. Chassis Design.
5. New Strengthen Material arms with new suspension geometry.
6. New Centre Diff System.
7.
Aluminum Easy Fit for Motor Holder with Center Diff. Mount.
8. 14mm Hex Wheel Hub system
10.
11. Ful
l aluminum in arm holders and toe in plates.
12.
S104 EVO Pro Kit Features :
Specification
Length: 385mm
Width: 248mm
Height: 158mm
Ground Clearance: 48mm
Wheelbase: 275-278mm
Track: F:223mm / R:228mm
Gear Ratio: C:87T, F/R 42/17T
Weight: 1720g~1820g
