Takara Belmont YUME ESPOIR User manual

{Basin body
[For Back wash] Type
{Seat body
[Fixed Legrest] Type
[Movable Legrest] Type
{Seat
[Fixed Legrest] Type
[Movable Legrest] Type
{Base plate
(Image is of “Movable legrest” type)
(Image is of “Fixed legrest” type)
YUME ESPOIR
Operating Instructions
This product is designed for shampooing and hair/scalp care.
YUME ESPOIR
1Version 7
Table of Contents
Description of Warning Symbols
Safety Precautions
Precautions for Use
Precautions for Handling Synthetic Leather
Position of Warning Labels
Name of Parts
Accessories
Before Using This Product
Preparations
How to Use
Guiding Customers
Maintenance
Daily Inspections
Before Requesting Repairs
Standard Duration of Use
Consumable Supplies
Disposing of This Product
After-sales Service
Specifications
Dimensions
Procedures for Daily Inspections
2
2
7
9
9
10
12
12
13
15
21
25
31
32
33
Parts Replaced on a Regular Basis
32
33
34
34
34
35
37
Thank you for purchasing this Takara Belmont product.
The instructions contained in this booklet should
be thoroughly read and understood before use.
Using this product before reading this operating
instructions may result in an accident.
This product is an industrial shampoo unit designed
for barbers and hair salons. Only use this product for
its intended purpose and do not use it for
non-hairdressing work.
Keep this instruction and refer back to them when
required.
Precautions on Resin (Plated) Parts
11
2021.11
Translation of the original instructions

Install on a stable area
Install the main body on a flat, firm floor, and fix it
securely. Failure to follow this instruction may
cause the main body to fall over.
Description of Warning Symbols
Safety Precautions (Adhere to these precautions at all times)
Before using this product
Symbols
If this symbol is ignored and the product is used, "there is the risk of death or serious
injury to the user".
Caution
Warning
Common danger and warning notifications
Common caution notifications
Common prohibited actions
Disassembly Prohibited
Prohibited disassembly or repairs/modifications
Guidance or instruction regarding common
user actions
Description of "ideal points to adhere to for safety".
If this symbol is ignored and the product is used, "there is the risk of light or moderate
injury or physical damage".
Precautions listed here
Remove power plug from the power outlet
Always connect a ground cable
Get on or off the seat it is in its
lowest position.
Get on or off the seat when it is in its lowest
position. Getting on or off the seat when it has
been lifted up may damage the seat, or
cause injury to the person using this product.
2
Note
Warning
The "Safety Precautions", "Precautions for Use" and "Precautions for Handling Synthetic Leather" contained in this booklet
should be thoroughly read and understood before use.
The precautions listed here are to ensure that this product can be used safely, and to prevent any danger or risk to the
person using this product or those around them.
These precautions are important for ensuring safety. Adhere to these precautions at all times. Takara Belmont is not
responsible for any damage or risk to the person using this product or those around them due to accidents if this product is
used without adhering to the "Safety Precautions", "Precautions for Use" and "Precautions for Handling Synthetic Leather".
In this case, the person failing to adhere to the "Safety Precautions", "Precautions for Use" and "Precautions for Handling
Synthetic Leather" will be responsible for any damage or risk incurred. Detailed descriptions of symbols are provided
below. Read and understand these symbols thoroughly before reading this instruction.
CAUTION
Hot water
Notification of high temperature warning

3
Stop using this product if it does not
move, or if it feels like there is a
problem present.
Stop using this product if the seat does not
move, or if it feels like there is a problem present.
Take care that customers or other
people do not touch the foot control
or power switch.
Be careful of the space between the
seat and floor.
Do not sit on the end of the legrest.
Do not sit on the end of the
legrest. The seat may
lose balance and fall over,
causing injury, or damage
to the seat.
Do not climb on the seat.
Failure to follow this
instruction may damage
the seat, or cause
injury.
Do not use with two or more people.
Do not climb on parts such as the
basin or backrest.
Do not climb on the backrest when
it is reclined.
Do not climb on or apply excessive force to the
backrest when it is reclined. Failure to follow
this instruction may damage the product or
cause it to fall over.
Do not insert fingers into movable
parts.
Do not insert fingers into movable parts.
Failure to follow this instruction may cause
injury.
zTake care that customers
or other people do not
touch the foot control or
power switch while using
this product. Carelessly
operating the switches
may cause injury.
zIf the product is not going
to be used, turn the power
switch off to prevent
accidental operation by
other people.
The seat must not be used by two or more people
at the same time. The maximum load of this
product is 135 kg or less. Using this product while
it is unstable or with a load that exceeds the
maximum load may
cause malfunctions or
damage, leading to
injury.
When the seat is lowered, the end of the seat
comes extremely close to floor level. When
lowering the seat, always check and make sure
that there are no people or objects under the seat.
In particular, take care to check for babies or
children. The seat may become damaged if people
or objects become trapped between the seat and
floor.
Do not climb on, pull or apply
excessive force to parts such
as the basin, backrest or end
of the seat. Failure to follow
this instruction may damage
the product or cause it to fall
over.
Warning

4
Disassembly
Prohibited
Disassembly and repairs/modifications
are prohibited.
Disassembly, repairs and modifications must not
be conducted by people other than qualified repair
technicians. Failure to follow this instruction may
cause electrocution, fire or abnormal operation,
leading to injury.
Ground items properly.
Failure to follow this instruction may cause electric
shock if there is a malfunction or ground leakage.
Contact a professional for grounding. (if an
extension power cable is used)
Turn the power off if this product is not
going to be used for a long period of
time, or during maintenance.
Always turn the power off after work, if this product
is not going to be used for a long period of time, or
during maintenance. Failure to follow this
instruction may cause ground leakage fires,
electric
shock
or burns due to insulation deterioration.
Adhere to the following when handling
power cables. (if an extension power cable is
used)
zWhen removing the power plug, hold the power
plug, instead of the cable itself, and pull to
remove.
zDo not use power cables or power plugs if they
are damaged, or if the connection with the
power outlet is loose. Failure to follow this
instruction may cause electric shock or a fire.
Adhere to the following when handling
power plugs.
zEnsure that this product is the only appliance
connected to the power outlet.
zInsert the power plug into the power outlet all
the way to the base. (if an extension power
cable is used)
Always remove the power plug during
maintenance. (if an extension power cable is
used)
Remove the power plug from the power outlet
during maintenance. Do not remove or insert the
power plug with wet hands. Failure to follow this
instruction may cause electric shock or burns.
Turn the power off at the switchboard if
this product is not going to be used for a
long period of time.
Turn the power off at the switchboard if this product
is not going to be used for a long period of time, such
as when the shop is closed. Failure to follow this
instruction may cause ground leakage fires,
electric
shock
or burns due to insulation deterioration.
Remove the power plug if this product is
not going to be used for a long period of
time. (if an extension power cable is used)
Remove the power plug from the power outlet if
this product is not going to be used for a long
period of time, such as after work or when the
shop is closed. Dust and moisture may cause
faulty insulation, leading to a ground leakage fire.
Be careful not to perform incorrect foot
control operations
Take care not to accidentally operate the foot
control while shampooing, or to trip over the foot
control or base plate. Failure to follow this
instruction may cause the unit to operate
suddenly, leading to injury.
Do not lean on the basin when working
between the seat and basin.
Leaning on the basin may cause the basin to fall
over. Also, colouring dyes on the neck cushion or
basin may stain the user's clothes.
Take care not to step on the foot control
when working between the seat and
basin body.
Take care not to step on the foot control when
working between the seat and basin. Accidentally
stepping on the foot control may cause the
backrest to recline, trapping the user. If the user
thinks that they may become trapped, follow the
steps provided in "Description of backrest
anti-trap mechanism (page 24)" to move out from
between the backrest and basin.
Do not operate the foot control while
seated on the stool.
When operating the seat for
shampooing, do not operate
the foot control while still
seated on the stool. When
operating the seat, first
move in front of the foot
control and check that there
are no objects obstructing movement of the seat.
Warning

5
CAUTION
Hot water
Periodically remove dust from the
power plug.
(if an extension power cable is used)
Periodically remove any dust or dirt from the
power plug and power outlet. Moisture may lead
to faulty insulation, and cause a fire.
Return the water temperature to an
appropriate position after using
hot water.
Do not spray areas other than the basin
with water.
zTake care not to spray areas other than the basin
with water. If water does come in contact with
areas other than the basin, wipe them dry as
soon as possible. Water entering the main body
may cause malfunctions or a ground leakage
fire.
zTake care not to allow water to drip on the floor.
If water does drip on the floor, wipe it dry as
soon as possible. Failure to follow this
instruction may damage the floor, or cause
water leakage.
Take care of the space between the seat
and wall at the front.
When lifting or lowering the seat, check that there
is sufficient space between the customer's feet
and wall in front. If the customer's feet hit the
wall, it may cause injury.
<Fixed legrest Type>
The seat slides forward approximately 65 mm
when being lowered.
<Movable legrest Type>
The seat slides forward approximately 30 mm
when being lifted.
Adjust the water temperature while
checking the temperature by hand.
When adjusting the temperature of the water,
reduce the volume of water, point the shower
head away from the customer and check the
temperature by hand. Take care when doing so,
as hot water may come out of the shower head.
Do not use hot water (boiling water) of
60°C or higher.
Using hot water of 60°C or higher may deform or
damage the basin, shower head.
Adhere to the following when operating
the seat.
When operating the seat,
check and make sure that
there are no people or
objects around the seat.
The seat may hit them
when operating, leading to
injury.
When operating the seat, always check
and make sure that there are no people
or objects within the operating area.
They may become trapped, causing injury, or
damage the seat.
Return the water temperature to an appropriate
position after using hot water.
Continuing to use the hot water in the hot position
may cause burns.
Warning

6
Caution
Do not use this product with the cover
broken.
Replace the cover if it breaks. Continuing to use
this product with a broken cover may cause a
malfunction or an accident.
Do not use outdoors.
This product is designed for indoor use. Do not
install this product outdoors or within a vehicle.
Be sure to only use this product inside a barber or
hair salon. Failure to follow this instruction may
cause malfunctions or damage to the main body.
Do not subject the unit to
shocks.
Do not subject the unit to
shocks. Failure to follow this
instruction may cause
damage, leading to injury.
Never use this product
lying face down.
Failure to follow this
instruction may cause
injury to the customer, or
damage to the seat.
Do not turn the water fully on with the
shower head in the shower head bracket.
Failure to follow this instruction may cause water
to spill out of the basin, covering the customer
with water. When turning the water on with the
shower head in the shower head bracket, check
the surrounding area and turn the tap slowly.
Do not place objects on this product.
Only allow people to sit on the seat. Placing heavy
objects on the seat may cause deformation and
damage, leading to injury.
Do not drink the water.
This product is designed for washing hair. Do not
drink the water. The water quality may cause
diarrhea or stomach pain.
Only use this product for its intended purpose
and do not use it for non-hairdressing work.
This product is an industrial product designed for barbers
and hair salons. Only use this product for its intended
purpose and do not use it for non-hairdressing work.
Do not use this product if the coating is
peeling.
Replace the water taps (tap cover) if the coating is
peeling. Continuing to use this product when the
coating is peeling may cause injury.
Support the customer's head by hand
when lowering or lifting the backrest.
Support the customer's head by hand when
lowering or lifting the backrest. Failure to follow
this instruction may cause the customer to hit their
head on the basin.
Take care of the step between the base
plate and the floor.
There is an approximately 6 mm step between the
base plate and the floor. Take care not to hit the
step when walking. The user may trip, causing
injury.
Take care when handling the shower
hose.
zWhen using the basin, check that the shower
hose is not trapped around feet or under the
stool. Failure to follow this instruction may
cause damage to the basin.
zDo not step over the shower hose to use it.
Failure to follow this instruction may cause the
shower hose to become caught on the basin,
leading to injury. Do not use the product in a place
where freezing is expected.
Failure to take this precaution may result in
breakage of parts, thus resulting in water leaks.
Repair of breakage due to freezing will result in
fees being charged even during the warranty
period. If freezing is expected, maintain the room
temperature at 0℃or above by using a heater.

Do not cover the drain outlet when
this product is not going to be used.
Do not cover the drain outlet with the drain cap,
towel, or shampoo cloth after finishing the work.
Water may overflow the basin when water is
improperly discharged or a small amount of water
is discharged due to an increase in water
pressure during the night, resulting in water leaks.
Be sure to remove the trap cover from the drain
outlet when the product is not in use.
7
Precautions for Use
Do not wipe with chemicals or apply heat.
Failure to follow this instruction may cause
deformation or discolouration. If chemicals spill
on to the leather or covers, wipe them dry as soon
as possible.
Do not use strongly acidic or strongly
alkaline cleaning solvents.
Do not use cleaning solvents containing mainly
caustic soda (NaOH) or caustic potash (KOH) to
clean the drain pipe. Never pour thinners, alcohol,
nail polish remover, gasoline or kerosene into the
drain. Failure to follow this instruction may cause
damage to the drain hose.
Return the shower head to the shower head
bracket so that the spray nozzle faces the basin.
Failure to follow this instruction may cause water
to spill out of the basin or cover the customer with
water.
Always wipe the floor clean if it is wet.
Wipe the floor as soon as possible if it is wet after
shampooing. Failure to follow this instruction may
damage the floor or cause degradation and
malfunctions to parts in contact with the floor or
the foot control.
After use, wipe water away from all
Leaving the main body with water on it may
cause damage, and make dirt difficult to remove.
Do not force the seat, backrest or
legrest up.
Failure to follow this instruction may cause incorrect
operation or malfunctions in the seat.
Operate the power switch by hand.
Always operate the power switch by hand. Failure
to follow this instruction may damage the seat.
Clean the hair catcher regularly.
Clean the hair catcher as regularly as possible.
Continuing to use the hair catcher without cleaning it
may cause the drain to become blocked with hair,
leading to water overflowing and unhygienic conditions.
Try to clean the hair catcher after each shampoo.
Close the tap firmly.
After use or shampooing is complete, turn the
taps firmly in a clockwise direction and turn the
water off completely. Failure to turn the water off
completely may cause water leakage.
Avoid direct sunlight or excessive heat.
Avoid direct sunlight or excessive heat. Failure
to follow this instruction may cause discolouration
or degradation of the leather.
Do not leave the shower head
immersed in water.
If pressure in the water pipes decreases due to
repairs that follow water stoppages, the water in
the basin may flow back through the shower head.
Medicine
Caution

Do not hit the cover with objects, or
kick the cover.
Failure to follow this
instruction may cause
malfunctions or
accidents, leading to
damage to the main
body.
8
If chemicals spill on to this product,
wipe them dry as soon as possible.
If chemicals such as hair dyes spill on to this
product, wipe them dry as soon as possible.
Failure to follow this instruction may cause
discolouration, deterioration or deformation.
Also, if chemicals spill on to the floor, wipe them
dry as soon as possible.
Take care of the foot control cable.
Take extra care so that the customer does not
catch or kick the foot control cable when they get
on or off this product. Failure to follow this
instruction may cause the customer to fall over, or
cause damage to the unit.
Do not drop heavy objects on to the basin.
Do not place or drop heavy objects on to the
basin. Failure to follow this instruction may cause
damage such as scratches or cracks to the basin.
Do not hit the unit with objects.
Do not hit the unit with hard objects. Failure to
follow this instruction may cause deformation or
damage to the unit.
Do not wet the shower head bracket
with water.
Do not wet the shower
head bracket with water.
Failure to follow this
instruction may cause
water leaks.
Users should take care to be aware of
their surroundings when working
between the seat and basin.
Carrying metallic objects such as scissors while
working may scratch the basin.
Set the water temperature for this
product to 80˚C or less.
Failure to follow this instruction may cause malfunctions
or damage in parts such as the stop valve, check valve,
flexible pipe and thermostat water valve.
Do not apply steam directly to the
leather.
When using the steamer to perform hair/scalp care
and other work, do not apply the steam directly to
the leather. Failure to follow this instruction may
cause degradation of the leather.
In cold regions, ensure that water is
removed.
When using this product in winter in cold regions,
open the maintenance cover and open the check
valve filter to remove water and prevent freezing.
Failure to follow this instruction may cause water
leakage.
Do not use a scourer.
Do not use a scourer to clean the shower head,
shower head bracket or covers. Using hard cleaning
tools such as a scourer or a sponge with a scourer,
metallic scouring pad or nylon scouring pad may
cause scratches.
Always use the neck cushion.
Using this product without the neck cushion may
apply unnecessary load to the customer's neck,
causing injury. Always use the neck cushion.
Do not touch the hot water supply
pipe or mixing pipe.
The hot water supply pipe or mixing pipe may
become very hot. Do not touch the pipes directly.
Be careful of use.
The appliance is not to be used by children or persons
with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction.
Be careful of use.
Children shall not play with the appliance.
Be careful of use.
Cleaning and user maintenance shall not be made by
children without supervision.
Caution

Position of Warning Labels
Precautions for Handling Synthetic Leather
Handling precautions
9
zStains caused by clothing dyes
The synthetic leather of this product may become stained by direct contact with clothes or belts. If there is stains, wipe
clean as quickly as possible with a 10% detergent solution diluted using water to prevent permanent staining.
zTake care of deformation or stains due to direct contact
• Direct contact with other objects such as plastic products, painted items, solvents or adhesive tape may cause changes
to the surface luster, cracking, deformation or peeling.
• Direct contact with newspaper or printed paper may cause stains.
• Direct contact with items of clothing such as printed images of t-shirts, or jeans may cause stains of the synthetic leather
of this product.
• Direct contact with solvents such as benzene, nail polish remover, alcohol, oil (including beauty treatment oils) may
cause discolouration, melting of the surface, elution of the plasticizing agent, changes to surface luster,
hardening/softening or peeling.
• Using bleach or bleached sheets may cause changes to surface luster or discolouration.
• Installing this product next to sources of excess heat such as irons or heaters may cause deformation or discolouration.
• Protect this product from direct sunlight by installing curtains. Failure to follow this instruction may cause changes,
shrinking, discolouration or fading of the leather surface.
• Placing heavy objects for a long period of time may leave an imprint or wrinkles on the synthetic leather that cannot be
removed.
• Take care when handling products with NL1 leather (white), as there may be difficulty in removing stains from the
leather or stitching.

10
Name of Parts
Main body
Basin
Main body cover
(front)
Base plate
Foot control
Power switch
Seat
Backrest
Backrest cover
Neck cushion
Head pillow
Drain cap
Shower head
Main body cover (rear)
Mohair tape
(inside cover)
Shower hose
Maintenance cover
Base cover
Shower head
bracket
*
Power switch
Foot control
Seat
Backrest
Legrest
Note
• The back wash (YUME) basin has bumps in
the area marked with the * symbol. However,
these are a feature of the ceramic basin
manufacturing process and not indicative of
a defective product.
• The external cover is made of plastic. There
may be streaked lines or different shades.
However, these are a result of the external
cover manufacturing process and not
indicative of a defective product.
<For Back wash (same as YUME basin)>
Thermostatic control knob
Tap

11
Caution
Precautions on Resin (Plated) Parts
Check that there are no scratches, cracks, or peeling of the plated surface of the taps
before using the product. If peeling is observed, immediately stop using the product and
contact your local Takara Belmont dealer. Continued operation may result in injuries.
• Resin plating is adopted for part of the tap and the thermostatic control knob.
〇Plating is a thin, hard metal film applied to the surface that may crack or peel due to corrosion or
aged deterioration.
〇Scratches or cracks may occur on the plated surface due to impacts from falling objects.
〇Scratches or cracks may occur on the plated surface when a hard object hits the surface.
〇Peeling of the plating may occur from scratches or cracks on the plated surface.
An example of peeling
of the plated surface
An example of scratches
on the plated surface
Name of Parts
Name of Parts
Shower head
bracket with drainer
Cover
Sponge
Sponge holder
Shower head
holder
Shower head
Dual function shower headDual function shower head
Protrusion
Shower head
Shower head
plate
Foaming water outlet
Selection
switch

12
• Neck cushion...1
• Hair catcher...1
• Installation instructions ...1
• Operating Instructions...1
• YUME SPA Technical Manual...1
• Head pillow...1 set
• Drain cap...1
• Mohair tape for
replacement...1
Accessories
Before Using This Product
• The back wash (YUME) basin is a shampooing product designed for performing back shampooing*1 or hair/scalp care.
• The side wash basin is a shampooing product designed for performing side shampooing*2 or hair/scalp care.
• The back approach*3 to this product is designed for performing shampooing while seated.
For performing shampooing more comfortably, the use of a ESPOIR stool (sold separately, part No. ES-ESST) is
recommended.
• Check that all accessories have been attached properly.
• Please note that the gap between covers may vary slightly from product to product.
• There is a slight gap between the basin and the cover. This is because the basin is made of ceramic, and is not indicative of
defective quality.
• Please note that the gap between the backrest and the basin when the backrest is reclined may vary slightly from product to
product.
• Please note that the neck position and height may vary slightly from product to product as the basin is made of ceramic
material.
*1 Back shampooing: the user sits behind the basin and performs shampooing from the back (back position).
*2 Side shampooing: the user stands next to the basin and performs shampoo from the side (side of basin).
*3 Back approach: the user performs hair/scalp care and the like from behind the basin.
ySponge

13
<Back wash (same as YUME basin)>
Attach neck cushion
The fastening pins can be removed.
Take care not to lose the fastening pins.
The short edge faces
the basin side
The long edge faces
the seat side
Remove neck cushion
Caution
Preparations
Hold the snap buttons (4 locations) when removing the neck cushion.
Align the direction of the head pillow as shown in the illustration, and insert.
Applying excessive force to remove the neck cushion
may damage the parts.
Attach head pillow
Note
Head pillow
(underside)
Attachment fitting
The neck cushion and head pillow are consumable supplies.
Replace them if they are extremely dirty or the surface has deteriorated. (available at additional cost)
(1) Align the neck cushion as shown in the illustration, and fit
the neck cushion on the attachment fittings. (Make sure
the attachment direction is correct.)
(2) Attach the seat side snap buttons of the neck cushion to the
fastening pins on the attachment fittings.
(3) Adjust the shape of the neck cushion to fix it to the attachment
fittings, and attach the basin side snap buttons of the neck
cushion to the fastening pins.
Snap button
Snap button
Basin side
Seat side
Snap button
Neck cushion
Attachment fitting
Fastening pin

Remove the Cover
Sponge Installation
1Turn the cover anticlockwise.
Turn the cover around 5 degrees.
【Image】
2Pinch the front and back of the cover
to deform and remove the catch.
Catch
Cover
Attach the sponge to the shower hose.
Attach the sponge and sponge holder to the shower
hose, between the shower head holder and the
cover.
Installation of the Cover
Align groove in the cover and protrusion of the holder until they snap into place.
Protrusion
Sponge
Cover
Sponge holder
Shower head
holder
Do not remove the cover of holder forcibly.
Failure to follow the instruction may cause damage the product.
Caution
Ensure that the harder side of
sponge is facing upwards.
Caution
Note: Harder side of sponge to be
facing upwards.
14

15
Power
Basic operation
Note
To confirm operation, a "beep" operating sound will be emitted
when entering automatic mode.
* The operating sound cannot be turned off.
Seat lowering
switch
Seat lifting
switch
DN UP
How to Use
<Seat>
DN UP
Setting the preset position
Power switch
[ON]
[OFF]
1Insert the power plug into a power outlet. (only if an extension power
cable is used)
2Turn the power on.
The power switch is on the left of the seat when viewed from the
basin.
The power will turn on if the power switch is pushed to the right
( symbol).
The power will turn off if pushed to the left ({symbol).
1When lifting or lowering the seat (automatic mode)
(1) When lifting the seat to a preset position [preset]
• Press the seat lifting switch.
Holding down (pressing for one second or longer) the seat
lifting switch will make the unit "beep", then automatic mode will
begin and the seat will lift automatically to the preset position.
(2) When lowering the seat (automatic return)
• Press the seat lowering switch.
Holding down (pressing for one second or longer) the DN switch
will make the unit "beep", then automatic mode will begin and
the seat will lower automatically to the initial position.
Warning
Always turn the power off with the power switch if
this product is not going to be used for a long period
of time, such as after work.
Warning
Turn the power off on the switchboard if this
product is not going to be used for a long period of
time, such as when the shop is closed. Failure to
follow this instruction may cause a fire from a
ground leakage fire due to insulation deterioration.
Note Operate the power switch by hand.
Note The speed at which the seat lowers may differ depending on changes in the oil temperature due to ambient
temperature, or the weight of the customer sitting on the seat.
Note Once in automatic mode, the seat will move automatically even if the foot control is released.
The preset position is set by default at the factory so that the customer's position laying down is appropriate. The level of
comfort may differ depending on the customer's frame or posture. If the preset position is to be adjusted to suit a certain
customer, follow the instructions in "How to set the preset position (see page 16)", and adjust the preset position.

[How to set the preset position]
ON
OFF
Present button
Power switch
Automatic return button
The standard preset position is adjusted in advance when the product is
shipped from the factory.
To change the preset position, follow the procedure below to set the new
position.
1. With the seat lifting/seat lowering switch, lift or lower the seat to the
desired height to set as the preset position.
2. Turn the power switch off.
3. Turn the power switch on while pressing the preset button located at
the top right of the power switch. A "beep" setting sound will be emitted
five seconds after turning the power switch on while pressing the preset
button. [Setting complete]
* The set position and the preset position may differ slightly depending on
the characteristics of the seat itself and the environment it is being used
in. After the setting is complete, use the automatic return function to
lower the seat to its initial position, press the preset button and check
that the seat has been lifted to the set position.
* The automatic return button is used when repairing the seat. Be sure
that customers do not press the automatic return button, as this may
alter the settings.
* The preset button and automatic return button are not operating
switches. The seat will not move even if these buttons are pressed.
2When adjusting the height of the seat (manual mode)
(1) Press the seat lowering switch briefly (pressing for one second or less) to lower the seat slightly.
(2) Press the seat lifting switch briefly (pressing for one second or less) to lift the seat slightly.
* Be careful that pressing the switch for one second or longer will enter automatic mode.
* The seat cannot be lifted higher than the preset position set when the product is shipped from the factory.
3Automatic mode cancellation function
To stop the seat moving in the automatic mode, press the seat lifting switch or seat lowering switch when the seat is
moving automatically. This will stop the seat from lifting or lowering.
Warning
When lifting or lowering the seat, check and make sure that there are no people or obstructions near
the seat. Failure to follow this instruction may cause injury, or damage the seat.
zMake sure that there are no people or objects under the seat or basin. In particular, make sure to
check for babies or children.
zCheck that there are no people or objects between the seat and floor.
zWhen lifting or lowering the seat, check that there is sufficient space between the customer's feet
and wall in front.
zNever touch the switch when working between the seat and basin. Failure to follow this instruction
may cause the user to become trapped, leading to injury.
16

Using the Dual function shower head
17
Changing the selection switch position switches between Shower Mode and air Low Splash Foaming
Mode.
Shower head
Selection switch
Shower head plate
Foaming water outlet
<Shower Mode> <Low Splash Foaming Mode>
Press the switch on the
side with the protrusion.
Press the switch on the
flat side.
Protrusion
Water Outlet
Dual function shower headDual function shower head
Shower head holder
Caution
- Do not discharge a strong water stream when the
shower head is in the shower head holder. Failure to
take this precaution may result in system failure due
to spilled water or damage to the floor.
- Return the shower head to the shower head holder
after use so that the spray nozzle is pointed toward
the basin.

Adjusting the volume of water
Caution
- When not in use, turn the tap securely to the rightmost position (clockwise) to
ensure the warm water stops.
Failure to completely stop the water may cause water leak accidents.
- After the completion of work, do NOT block the drain port with the trap cap, towels,
or shampoo cloths.If the water accidentally flow or a small amount of water flow due
to the increase of water pressure at night while the trap cap is covered, water leak-
age may occur.
Failure to take this precaution may result in contact between the metal and the tap
resulting in scratches or cracks on the plated surface and thereby causing peeling of
the plating.
- When the water discharge flow becomes slow, the discharge pipe may be clogged
with waste or the like. In such a case, immediately stop using the product and
contact your local Takara Belmont dealer.
- Check that there are no scratches, cracks, or peeling of the plated surface of the
knobs before using the product.
If peeling is observed, immediately stop using the product and contact your local
Takara Belmont dealer. Continued operation may result in injuries.
- The tap may become stiffer when turned depending on the environment or condition
that it is used in.
This is due to deterioration of gasket of movable parts or a lack of grease as a result
of aging.
- Depending on the usage environment or conditions, the flowing water sound may be generated from
the basin. This phenomenon occurs as water flows fast in the pipe when some condition, such as
hydraulic pressure and adjustment of hot water amount is met, and is not a product defect. The flowing
water sound may be reduced by adjusting the hydraulic pressure.
- The tap may become stiffer when turned depending on the environment or condition that it is used in.
This is due to deterioration of gasket of movable parts or a lack of grease as a result of aging.
Replacement of the gasket or other parts, or a recoating of grease is required.
Shower head
Turning the tap to the left (anticlockwise) will output
water from the shower head.
The volume of water will increase as the tap is
turned left.
The maximum volume of water will be output when
the tap is turned full left.
Turning the tap full right (clockwise) will turn the
water off.
Close
Tap
Open
18

Adjusting the water temperature
19
Stop
(H) Hot
(C) Cold
Tap
Thermostatic
Control Knob
Shower Head
Open
Here is thermostatic
control lock position.
（H）Hot
Stopper button
Thermostatic
control knob
1) Turn the thermostatic control knob to H (hot) or C
(cold) direction and stop it at the desired position.
Turning the tap toward left (anticlockwise) will
make the water hotter, and turning it toward right
(clockwise) will make it colder.
2) The thermostatic control knob stops at a point; thermo-
static control lock position as the right figure.
For using hot water at high temperature (40 °C or more),
turn the thermostatic control knob to the H (hot) direc-
tion while pressing the stopper button.
* Note that hot water at about 49°C or more is not available with this product to ensure safe operation.
(Conditions: Same supply pressure, water temperature 20°C, Hot water temperature 60°C)
Warning
Caution
Caution
When adjusting the water tempera-
ture, reduce the volume of water,
point the shower head away from
the customer and check the tem-
perature by hand. Take care when
doing so, as hot water may come
out of the shower head.
- Before supplying water, check the set temperature position of the thermostatic
control knob. Failure to follow this instruction may cause hot water to come out and
burns. In addition, if you shampoo the customer's hair at a temperature higher than
that of the thermostatic control lock position, do NOT operate the thermostatic
control knob during the shampoo service. Failure to follow this instruction may cause
improper operation by which hot water splashes onto the customer's head and the
customer may get burned.
- If you have turned the handle to a temperature higher than that of the thermostatic
control lock position, be sure to return it to the thermostatic control lock position
after use. If you keep using the equipment at the temperature, hot water may splash
onto hands and heads, causing burns.
- Before turning the tap, take off metals, such as rings and watches. Failure to follow
this brings such metals into contact with the top surface (cap) of the tap, which
results in scratches and cracks on the plated surface, causing separation of the
plating.
- Before using, check that there are no scratches, cracks, or separation of plating on
the plated surface of the thermostatic control knob.

Note
Caution
Caution
The drain cap must be detached from the drain
outlet when the product is not in use. If the drain
is not detached, the drain may accidentally close,
and the water may overflow the basin from the
failure to notice water discharge, thus resulting
in water leaks.
Do not leave the showerhead in the water. Water may flow back when the water pressure
in the water pipe decreases during a water outage.
When the drainage speed slows, there is a possibility that dust and dirt may have clogged
the drainpipe.
The amount of accumulated hot water may decrease slightly in an amount that does not affect use.
A small amount of water may flow out, which does not affect use. If the decreasing level is
significant, the gasket of the drain cap may have deteriorated or become worn. Replace the drain cap.
(Available at additional cost.)
To fill up basin with hot water
Shower hose slot
Drain cap
The drain is closed.
The drain is open.
Clockwise Direction
Anticlockwise Direction
<Filling the basin>
<Discharging the water>
To fill the basin with water, rotate the drain cap in
the clockwise direction to close the drain outlet.
The amount of water should be below the level
shown by the dotted line in the illustration below
(just below the shower hose slot).
When water accumulates and exceeds the dotted
line, water may overflow from the shower hose
slot.
To drain the water, rotate the drain cap in the
anticlockwise direction to open the drain outlet.
For Back wash (same as YUME basin)For Back wash (same as YUME basin)
Drain cap
20