Teknion Marini Owner's manual

SEAT HEIGHT ADJUSTMENT BACK TILT ADJUSTMENT
SEAT DEPTH ADJUSTMENT TILT TENSION ADJUSTMENT
o raise the chair, lift the lever up
while lifting your weight from the
seat until you reach the desired level,
then release to lock in place. o
lower the chair, lift the lever up and
allow your weight to push the seat
down until you reach the desired
level, then release to lock in place.
o adjust the angle of reclination,
push the lever down to unlock the
back. Recline to the desired
position and lift the lever up to
lock in place or leave to allow
backrest to recline freely.
o adjust the seat depth, lift the
lever up and simultaneously lift
your weight from the seat while
sliding the seat forward or
backward. Release lever to lock the
seat in place.
Leaning back, determine if the
resistance of the chair is comfortable.
For less resistance, pull tension
adjustment knob out and turn it
counter clockwise. For greater
resistance, turn the knob clockwise.
marini adjustment features & instructions

W rning
ipping or collapsing can result in serious injury. o prevent product failure and possible injury:
• his chair has been designed and tested for users weighing up to 300 lbs
• Frequently inspect the chair for visible cracks and damages, tighten all screws, bolts, adjustable knobs and parts
• Do not use the chair if damaged or unstable – immediately remove it from service
• his chair is equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling
and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection
• Do not stand on or use the chair as a step ladder
• Failure to follow these warnings could result in serious injury
ARM HEIGHT ADJUSTMENT ARM WIDTH ADJUSTMENT
o adjust the arm height, press the
button located under the armrest
to raise or lower it to the desired
position. Release the button to lock
in place.
o adjust width of each arm, push
the lever down and slide the arm to
the desired position. Push the lever
up to lock the arm in place.
marini adjustment features & instructions