TEMPLE & WEBSTER Dion Herringbone SBDPTVOAK User manual

ASSEMBLY INSTRUCTIONS
SBDPTVOAK
Dion Herringbone 200cm TV Unit
Two people required
TEMPLE
WEBSTER
www.templeandwebster.com.au
V2

Keep these instructions for future reference
Assemble the furniture on a soft level surface to avoid damaging the furniture or
your floor.
Parts of the assembly will be easier with 2 people.
We recommend furniture be assembled near where they will be placed, to avoid
moving the product unnecessarily once assembled.
If there is a need to move the furniture, please remove all loose items and have
extra hands to help lift the furniture to the desired location. Dragging the
furniture will damage both the furniture and the floor.
Regularly check and re-tighten (if necessary) all bolts on furniture that you have
assembled yourself.
2
Care and Maintenance of your Furniture
Wipe clean with a damp cloth. Use only water or a gentle detergent.
Wipe dry with a clean cloth.

WARNING：
It is STRONGLY RECOMMENDED that you ANCHOR this product.
Toppling furniture can cause serious injuries and death.
This product has been supplied with a bracket. To prevent your furniture from tipping
forward it is strongly recommended that you securely attach this product to a wall or
other solid surface, using the brackets provided and appropriate fixings.
IMPORTANT:
Regularly check that anchors are securely maintained.
Use safety drawer locks to prevent children climbing.
Stability of tall items may be affected by thick pile carpet or uneven floors.
Do not place unanchored televisions on furniture.
CAUTION:
For your safety when attaching the anchor fixings, please note the following:
- Check for any electrical wires or plumbing inside the wall before drilling any holes (if
you are unsure, please seek professional advice from a qualified tradesperson)
- Walls are constructed from different materials, for example, masonry (solid brick) or
plasterboard lined cavity walls (hollow). It is important that you use the appropriate
wall fixings for your wall type. If unsure, please seek professional advice on how to
attach this safety bracket to your specific wall.
- Your local hardware store will have the necessary drills and fixings and can offer
advice if needed. If in doubt, engage the services of a qualified tradesperson to install
and anchor the product.
3

Tools Required Time Required
60 min
DO NOT USE Mallet Cross Screwdriver
People Required
Parts List
Top Panel (P1);
Left Side (P2);
Right Side (P3);
Divider Panel (P4);
Base (P5);
Back Panel (P6);
Support Leg (P8);
Left Door (P9);
Middle Door (P10);
Right Door (P12);
Shelf (P13) x2.
Flat head Screwdriver
(P1)
(P13)
(P13)
(P4)
(P2)
(P6)
(P3)
(P5)
(P1)
(P7)
(P10)
(P9)
(P11)
(P12)
(P7)
(P8)
Leg (P7) x4;
Middle Door (P11);
4

Hardware/Fittings
Wood Dowel x 12
Connecting Bolt x 8
Locking nut x 8
3.5x16mm
Hinge x 4
Hinge x 4
Spring Washer x 8 16mm Washer x 8
Bracket x 2
M8x60mm Bolt x 8
4mm Allen Key x 1
Shelf Support x 8
Handle x 4
12 3 4
13 14
5 6 7 8
9 10 11 12
Screw x 28
3.5x16mm
Screw x 28
5mm Allen Key x 1
15
M6x50mm Bolt x 8
16
20mm Felt pad x 4
18
10x12mm Nut x 8
17
6.5x44mm
8x30mm
15x12mm
8mm
5x16mm
Door stopper x 2
19
70mm
5

1
2
into Left Side (P2), Right Side (P3) and Divider Panel (P4).
If necessary,gently tap the wood dowels with a mallet.
6 x12
Insert 12 x Wood Dowels
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1 x8 2 x8 3 x8 15 x1
15
3
2
1
(P2) (P3)
(P4)
(P7)
(P5)
(P8)
(P7)
(P7)
(P7)
(P7)
2
13
15
Attach 4 x Legs (P7) to Base (P5) using 8 x Bolts , 8 x Spring Washers and 8 x Washers .
Tighten the bolts with Allen Key .
6

3
17 x816 x8 14 x1
17
16
14
(P2)
(P5)
Attach Left Side (P2), Right Side (P3) and Divider Panel (P4) to Base (P5) using 8 x Bolts and
8 x Nuts . Tighten the bolts with Allen Key .
16
17 14
(P5)
(P4)
(P3)
(P2)
7

4
5
Screw 8 x Bolts into Top Panel (P1).
AA
11 x28 x47 x4
4 x8
11
8
7
11
11
4
4
(P1)
(P1)
Loosely attach 2 x Brackets to Top Panel (P1) using 4 x Screws .
Fix 2 x Door stopper to Top Panel (P1) using 4 x Screws .
11 8
7
4
4
19 x2
19
19
19
19
8

6
7
BB
5 x8 18 x4
18 x4
5
8 x24
8(P6)
(P1)
(P1)
(P2)
Attach Top Panel (P1) to Left Side (P2), Right Side (P3) and Divider Panel (P4)
using 8 x Locking Nuts . Use a screwdriver to turn the nuts clockwise to lock.
Attach 4 x Felt Pads to the 4 x Legs (P7).
5
18
Place Back Panel (P6) onto the back as shown.
If necessary, adjust the assembly so that the diagonal measurements of the assembly are equal.
Fix the Back Panel (P6) to the Bottom, Left, Right Sides, Divider and Top Panel using 24 x Screws as shown.
With help,carefully turn the TV Unit over.
AA
8
9

8
I. With help, move the TV Unit into position. Mark drilling points on the wall.
II. If necessary, remove the TV Unit and drill holes with sizes suitable for your wall fixings.
III. Install wall fixings in the holes.
IV. Fix the wall brackets to the wall with appropriate wall fixing screws.
V. Fasten the wall brackets to the underside of the top panel.
With help, carefully turn the TV Unit over.
10

9
12 x8
12
(P13)
(P13)
Insert 8 x Shelf Supports into desired locations on the Side and Divider panels.
Gently place the 2 x Shelf (P13) as shown.
12
11

10
11
7 x6 9 x2 13 x1
Fix 2 x Hinges to Left Door (P9) using 4 x Screws .
Fix 1 x Handle to Left Door (P9) using 2 x Screws .
97
7
13
Attach the door on the cabinet as shown.
(P9)
13
7
9
7
13
9
9
(P9)
10 9
12

12
13
7 x6 10 x2 13 x1
Fix 2 x Hinges to Middle Door (P10) using 4 x Screws .
Fix 1 x Handle to Middle Door (P10) using 2 x Screws .
10 7
7
13
Attach the door on the cabinet as shown.
(P10)
13
10
7
7
10
13
10
(P10)
910
13

14
15
7 x6 10 x2 13 x1
Attach the door on the cabinet as shown.
Fix 2 x Hinges to Middle Door (P11) using 4 x Screws .
Fix 1 x Handle to Middle Door (P11) using 2 x Screws .
10 7
7
13
(P11)
13
13
10
10
10
7
7(P11)
910
14

16
17
7 x6 9 x2 13 x1
Fix 2 x Hinges to Right Door (P12) using 4 x Screws .
Fix 1 x Handle to Right Door (P12) using 2 x Screws .
97
7
13
Attach the door on the cabinet as shown.
(P12)
13
7
9
7
13
9
9
(P12)
10 9
15

18
If adjustment is necessary, please follow the steps below:
To move doors up or down:
To move doors in or out:
loosen or tighten the screws on the hinge plate, as shown.
To move doors left or right:
Loosen or tighten the screws to suit, as shown.
Turn the adjustment screw on both hinge plates on the door as shown.
16

16
19
Assembly is complete.
Please dispose of all
packing thoughtfully.