TEMPLE & WEBSTER Ruben SBSRDONT User manual

ASSEMBLY INSTRUCTIONS
SBSRDONT
Ruben 120cm Oak Dining Table - Natural
Two people required
TEMPLE
WEBSTER
www.templeandwebster.com.au
2021/6/26

Keep these instructions for future reference
Assemble the furniture on a soft level surface to avoid damaging the furniture or
your floor.
Parts of the assembly will be easier with 2 people.
We recommend furniture be assembled near where they will be placed, to avoid
moving the product unnecessarily once assembled.
If there is a need to move the furniture, please remove all loose items and have
extra hands to help lift the furniture to the desired location. Dragging the
furniture will damage both the furniture and the floor.
Regularly check and re-tighten (if necessary) all bolts on furniture that you have
assembled yourself.
2
Care and Maintenance of your Furniture
Wipe clean with a damp cloth. Use only water or a gentle detergent.
Wipe dry with a clean cloth.

3
Tools Required Time Required
30 min
DO NOT USE
People Required
(P1);
(P2);
Parts List
Table Top
Connecting Panel
Base (P3).
(P1)
(P2)
(P3)

Hardware/Fittings
4
M8 x 30mm Bolt x 14
(H1)
5mm Allen Key x 1
(H2)
Felt Pad x 4
(H3)
35x3mm

5
1
2
H1 x 6 H2 x 1
Attach Connecting Panel (P2) to Base (P3)
with 6 x Bolts (H1).
Fasten the Bolts with Allen Key (H2).
P2
P2
H1
H2
P3
Place the Table Top (P1) on a soft covered surface.
With help, carefully place the base assembly on the
Table Top (P1).
Attach Table Top (P1) to the Connecting
Panel (P2) using 8 x Bolts (H1).
Fasten the Bolts with Allen Key (H2).
Paste 4 x Feet Pads (H3) onto Base (P3)
as shown.
H1 x 8 H2 x 1
H1
H2
H1
H1
H3 x 4
H3
H3
H3
H3
H3 x 4
P1
P3

14
3
With help,carefully turn the table over.
max
40 kg
Assembly is complete.
Please dispose of all
packing thoughtfully.