TEMPLE & WEBSTER SBVIBTNB User manual

ASSEMBLY INSTRUCTIONS
SBVIBTNB
SBVIBTNW
Two people required
TEMPLE
WEBSTER
www.templeandwebster.com.au
V1
Vonn Oak Veneer Kitchen Island Bench - White Oak
Vonn Oak Veneer Kitchen Island Bench - White
Top w/ Black Body

Keep these instructions for future reference
Assemble the furniture on a soft level surface to avoid damaging the furniture or
your floor.
Parts of the assembly will be easier with 2 people.
We recommend furniture be assembled near where they will be placed, to avoid
moving the product unnecessarily once assembled.
If there is a need to move the furniture, please remove all loose items and have
extra hands to help lift the furniture to the desired location. Dragging the
furniture will damage both the furniture and the floor.
Regularly check and re-tighten (if necessary) all bolts on furniture that you have
assembled yourself.
2
Care and Maintenance of your Furniture
Always use coasters or placemats to protect the table surface, remove any liquid
spills immediately using a clean cloth or kitchen roll sheet & mild detergent.
Do not stand on the Furniture

3
Tools Required Time Required
60 min
DO NOT USE Mallet Cross Screwdriver
People Required
Parts List
Top Panel (P1);
Left Side (P2);
Right Side (P3);
(P1)
(P4)
(P5)
Flat head Screwdriver
(P3)
Shelf (P5)x2.
(P2)
(P5)
Back Panel (P4);

Hardware/Fittings
4
Wood Dowel x 18 Connecting Bolt x 23 Locking Nut x23
8x30mm
Spring Washer x 8 16mm Washer x 8
M6x45mm Bolt x 8
4mm Allen Key x 1
6x44mm 15x10mm
Felt Pad x 4
Hook x 4
70x30mm
1234
56
9
78

5
1
2
Screw 6 x Connecting Bolts into Back Panel (P4).
Insert 6 x Wood Dowels into Back Panel (P4).
(P4)
(P4)
1 x6
1
1
1
11
1
1
2 x6
2
2
2
2
2
2
2

3
4
Insert 12 x Wood Dowels into into 2 x Shelf (P5).
(P5) x2
(P4)
(P5)
(P5)
Position 1 x Shelf (P5) onto Back Panel (P4) as shown.
Insert 3 x Locking Nuts into Shelf (P5).
Turn the Locking Nuts clockwise to lock using a flat head screwdriver.
Repeat with the other Shelf (P5).
6
1 x12
3 x6
1
1
1
11
1
3
3
3
3
3
3
3
1
3
3

5
6
(P3)
Screw 7 x Connecting Bolts into Right Side (P3).
Paste 2 x Felt Pads to the Right Side (P3) as shown.
Position the shelf and back panel assembly
onto Right Side (P3) as shown.
Insert 7 x Locking Nuts into Shelf (P5)
and Back Panel (P4).
Turn the Locking Nuts clockwise to
lock using a flat head screwdriver.
(P4)
(P3)
(P5)
7
2 x7 8 x2
3 x7
2
2
2
2
2
2
2
8
8
8
2
8
3
3
3
3 3
3
3
3

7
(P2)
Screw 7 x Connecting Bolts into Left Side (P2).
Paste 2 x Felt Pads to the Left Side (P2) as shown.
Position Left Side (P2) onto the assembled unit as shown.
Insert 7 x Locking Nuts into Shelf (P5) and
Back Panel (P4).
Turn the Locking Nuts clockwise to lock
using a flat head screwdriver.
With help, carefully turn the assembled unit upright.
8
(P2)
8
2 x7 8 x2
2
8
8
8
2
2
2
2
22
2
8
3 x7
3
3
3
3
3
3
3
3
3
3

9
9
10
Screw 3 x Connecting Bolts into Top Panel (P1).
(P1)
(P1)
(P4)
Position Top Panel (P1) onto the assembled unit as shown.
Insert 3 x Locking Nuts into Back Panel (P4).
Turn the Locking Nuts clockwise to lock using a flat head screwdriver.
2 x3
2
2
2
2
3 x3
3
3
3
3
3
3

10
11
Attach Top Panel (P1) to Left Side (P2), Right Side (P3) with 8 x Bolts , 8 x Spring Washers and 8 x Washers .
Tighten the bolts with Allen Key .
12
Please dispose of all
packaging thoughtfully.
Hang 4 x Hooks onto the rod on Right Side (P3).
Assembly is complete.
(P3)
(P2 )
(P3)
(P1)
(P1)
(P2)
(P3)
5 x8 6 x8 7 x8 4 x1
7
6
5
4
5
55
5
55
9 x4
9999
9
5 6 7
4