TEMPLE & WEBSTER SBKCNTOA User manual

ASSEMBLY INSTRUCTIONS
Two people required
TEMPLE
WEBSTER
www.templeandwebster.com.au
V1
Oak Ski-Leg 140cm Console Table - White Oak
SBKCNTOA
Oak and Black Ski-Leg 140cm Console Table
- White Oak / Black Leg
SBKCNTBK

Keep these instructions for future reference
Assemble the furniture on a soft level surface to avoid damaging the furniture or
your floor.
Parts of the assembly will be easier with 2 people.
We recommend furniture be assembled near where they will be placed, to avoid
moving the product unnecessarily once assembled.
If there is a need to move the furniture, please remove all loose items and have
extra hands to help lift the furniture to the desired location. Dragging the
furniture will damage both the furniture and the floor.
Regularly check and re-tighten (if necessary) all bolts on furniture that you have
assembled yourself.
2
Care and Maintenance of your Furniture
Always use coasters or placemats to protect the table surface, remove any liquid
spills immediately using a clean cloth or kitchen roll sheet & mild detergent.
Do not stand on the Furniture

Tools Required
Parts List
3
DO NOT USE
Table Top (P1);
Leg Post (P2) x 2;
Leg Post (P3) x 2;
Stretcher (P4) x 2.
Time Required
30 min
People Required
Flat Head ScrewdriverMallet
(P1)
(P2)
(P2)
(P3)
(P3)
(P4)
(P4)

Hardware/Fittings
4
Flat Washer 12 Spring Washer 12Long Threaded Rod
Short Threaded Rod 4
Barrel Nut 4
M8 mm
1234
56
910
78

2
5
1
P2 x2
P3 x2
Insert 1 x Barrel Nut into Leg Post (P3).
If necessary, use a flat head screwdriver to rotate
the Barrel Nut.
Screw 2 x Long Threaded Rod into
into
Barrel Nut .
Screw 1 x Short Threaded Rod
Repeat with the remaining Leg Post (P3).
2 x4 5 x2 10 x2
2
2
2 2
10
2
2
5
10
10
2 x4 5 x2 10 x2
22
10
5
10
2
5
10
Insert 1 x Barrel Nut into Leg Post (P2).
If necessary, use a flat head screwdriver to rotate
the Barrel Nut.
Screw 2 x Long Threaded Rod into
into
Barrel Nut .
Screw 1 x Short Threaded Rod
Repeat with the remaining Leg Post (P2).
10
2
5
10
Leg Post (P2).
Leg Post (P3).

3
4
6
P2
P3
P1
If necessary, gently tap the wood dowels with a mallet.
Repeat with the remaining Stretcher (P4).
P4x2
Insert 4 x Wood Dowel n
ito Stretcher (P4).
80%
Place the Top (P1) with its underside facing up on a soft covered surface.
Position 1 x Leg Post (P3) onto the corner of Top (P1) as shown.
Loosely attach Leg Post (P3) to Table Top (P1) with 2 x Flat Washers ,
2 x Spring Washers and 2 x Nuts .
Repeat with the remaining Leg Post (P2) onto the corner of Top (P1) as shown.
Table
Table
Table
1 x8
11
11
1
4
3
7
47
3
3 x4 4 x4 7 x4
1
3
47

7
5
P4
P4
P3
P3
P2
P2
P1
Fit Stretcher (P4) onto Leg Post (P3) as shown.
Position Leg Post (P2) onto the other end of Stretcher (P4) and the corner of Top (P1) as
shown.
Loosely attach Leg Post (P2) to (P1) with 2 x Flat Washers ,
2 x Spring Washers and 2 x Nuts .
Fit Stretcher (P4) onto Leg Post (P2) as shown.
Position Leg Post (P3) onto the other end of Stretcher (P4) and the corner of Top (P1) as
shown.
Loosely attach Leg Post (P3) to Top (P1) with 2 x Flat Washers ,
2 x Spring Washers and 2 x Nuts .
Table
Table
Table Top
Table
3 x4 4 x4 7 x4
80%
1
4
3
7
47
3
3
47
3
47

6
8
P4
P4
4x
Attach Stretcher (P4) onto Leg Posts (P2) (P3) with 2 x half moon washers ,
2 x Flat Washers
, 2 x Spring Washers and 2 x Nuts on each leg frame.
Fasten with Spanner .
3 x4 4 x4 6 x4 7 x4 8 x1
8
6
3
47
63 4 7
6
34 7
8

7
8
With help, carefully turn the table over.
Assembly is complete.
9
Please dispose of all
packing thoughtfully.
4x 100%
Fasten all Nuts with Spanner .
Paste 4 x Felt Feet onto Leg Posts (P2)&(P3) as shown.
8
9
8 x1 9 x4
7 8
9