TEMPLE & WEBSTER Melis SBEMSIOA User manual

ASSEMBLY INSTRUCTION
www.templeandwebster.com.au
2022/01/05
SBEMSIOA
SBEMSIBK
Melis Sideboard

Keep these instructions for future reference
Read these instructions and follow steps carefully to ensure you assemble the product
correctly and avoid damages. Check that all parts and hardware have been provided
before assembling the product. Place all contents on a clean, soft-flat surface to avoid
scratching the product.
CAUTION:
Only Tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all
hardware. To prevent damage to threads, do not use a power tool and do not overtighten
bolts. Use two people to lift and turn the product when assembling. Do not attempt with
only one person and do not roll on to legs. Keep all hardware and small parts away from
children.
We recommend furniture be assembled near where they will be placed, to avoid moving
the product unnecessarily once assembled.
If there is a need to move the furniture, please remove all loose items and have extra
hands to help lift the furniture to the desired location. Dragging the furniture will damage
both the furniture and the floor.
Regularly check and re-tighten (if necessary) all bolts on furniture that you have
assembled yourself.
Wipe clean with a damp cloth. Use only water or a gentle detergent.
Wipe dry with a clean cloth.
Care and Maintenance of your Furniture
2
WARNING:
Do not stand on the Sideboard !

3
WARNING：
- Walls are constructed from different materials, for example, masonry (solid brick) or
plasterboard lined cavity walls (hollow). It is important that you use the appropriate
wall fixings for your wall type. If unsure, please seek professional advice on how to
attach this safety strap to your specific wall.
- Your local hardware store will have the necessary drills and fixings and can offer
advice if needed. If in doubt, engage the services of a qualified tradesperson to install
and anchor the product.
It is STRONGLY RECOMMENDED that you ANCHOR this product.
Toppling furniture can cause serious injuries and death.
This product has been s with a strap. To prevent your furniture from tipping
forward it is strongly recommended that you securely attach this product to a wall or
other solid surface, using the straps provided and appropriate fixings.
IMPORTANT:
Regularly check that anchors are securely maintained.
Use safety drawer locks to prevent children climbing.
Stability of tall items may be affected by thick pile carpet or uneven floors.
Do not place unanchored televisions on furniture.
CAUTION:
For your safety when attaching the anchor fixings, please note the following:
- Check for any electrical wires or plumbing inside the wall before drilling any holes (if
you are unsure, please seek professional advice from a qualified tradesperson)

Tools Required
Parts List
DO NOT USE
Time Required
45 min
1. Top panel, x1
2. Bottom panel, x1
3. Left side panel, x1
4. Right side panel, x1
5. Divider, x1
6. Back support panel, x1
7. Back panel, x2
8. Drawer front, x1
9. Drawer front, x1
10. Drawer front, x1
11. Left drawer side, x2
12. Left drawer side, x1
13. Right drawer side, x2
14. Right drawer side, x1
15. Drawer back, x2
16. Drawer back, x1
17. Drawer bottom, x3
18. Drawer bottom support, x3
19. Door, x1
20. Metal leg frame, x2
21. Metal support rail, x2
22. Metal support rail, x2
4
20
20
21
21
22
22
1
2
3
4
5
6
7
7
8
9
10
11
11
12
13
13
14
15
15
16
17
17
17
18
18
18
19

Fittings List
A B C D
EFG H
I J K L
MN
8x30mm
2pcs Screw: M4x12mm2pcs 34pcs 28pcs
28pcs 12pcs 12pcs Screw: M5x38mm 26pcs
14pcs 4pcs 8sets 3sets
2pcs
Adjustable feet: M6x15mm
4pcs Screw: M4x15mm
T
wall
Handle: 80x30mm Cam bolt
Cam nut Dowel:
Bolt: M6x10mm Back panel holder
Fabric wall strap Washer
5
Drawer runner
OP
2pcs 1pcAllen key
Hinge
Screw: M4x16mm
CL
DL
CR
DR

1
2
X4
E
6
X4
DX3 L
3
4
X9
C
C
D
4
3
6
CL
L(CL)
Fix 3 x Slide Tracks L (CL) onto Left side panel (3) with 9 x Screws (C) using a screwdriver.
Screw 2 x Cam bolts (D) into Left side panel (3) using a screwdriver.
Screw 2 x Cam bolts (D) into Right side panel (4) using a screwdriver.
D
Position Back support panel between Left side panel (3) and Right side panel (4) as shown.
Insert 4 x Cam nuts (E) into Back support panel as shown.
Use a screwdriver to turn Cam nuts (E) clockwise to lock.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
CL
L

3
4
X6
D
7
4
3
7
D
1
Insert Back panel (7) into the grooves of Left side panel (3), Right side panel (4) and Back support panel (6).
6
Screw 6 x Cam bolts (D) into Top panel (1) using a screwdriver.

5
6
8
3
4
1
X4
F
X4
E
E
E
F
F
F
F
E
7
3
4
E
Insert 4 x Dowels (F) into Left side panel (3) and Right side panel (4) as shown.
Position the Side panels onto the Top panel (1).
Insert 4 x Cam nuts (E) into Side panels (3) and (4) as shown.
Use a screwdriver to turn Cam nuts (E) clockwise to lock.
Insert Back panel (7) into the grooves of Left side panel (3), Right side panel (4) and Back support panel (6).
6

7
8
9
X9
CX3 L
5
1
5
E
E
F
F
X2
F
X2
E
C
CR
L(CR)
Fix 3 x Slide Tracks L (CR) onto Divider (5) with 9 x Screws (C) using a screwdriver.
Insert 2 x Dowels (F) into Divider (5) as shown.
Position Divider (5) onto the Top panel (1).
Insert 2 x Cam nuts (E) into Divider as shown.
Use a screwdriver to turn Cam nuts (E) clockwise to lock.
CR
L

9
10
10
X6
H
X6
F
H
F
F
F
F
F
F
H
H
H
H
H
2
X8
IX1 P
20
21
22
21
22 20
P
I
X8
Insert 6 x Dowels (F) into Left side panel (3), Right side panel (4) and Divider (5) as shown.
Attach Bottom panel (2) to the assembled frame with 6 x Screws (H) using a screwdriver.
4
5
3
Fix 2 x Metal support rails (21) and 2 x Metal support rails (22) between 2 x Metal leg frames (20) with 8 x Bolts (G)
using Allen key (N) as shown.

11
12
11
X4
JX1 P
X6
I
J
J
J
J
I
I
I
I
I
I
2
DD
89
D
10
X18
D
Attach the assembled metal base frame onto the assembled cabinet with 6 x Bolts (I) with Allen key (P).
Screw 4 x Adjustable Feet (J) into the metal base frame as shown.
With help, turn the assembled unit upright.
Screw 18 x Cam bolts (D) into Drawer fronts (8), (9) and (10) using a screwdriver as shown.

13
11
13
15
x2
x2
x2
12
14
16
17
17
13
11
14
12
16
15
18
18
15
16
H
H
H
H
H
H
X18
H
12
Fix Drawer back panel (15) onto Left drawer side (11) and Right drawer side (13) with 4 x Screws (H) using a screwdriver.
Slide Drawer bottom (17) into the grooves of Left drawer side (11), Right drawer side (13) and Drawer back (15) as shown.
Fix Drawer bottom support slat (18) onto Drawer back (15) with 2 x Screws (H) using a screwdriver.
Repeat with the remaining Drawer panels.
Fix Drawer back panel (16) onto Left drawer side (12) and Right drawer side (14) with 4 x Screws (H) using a screwdriver.
Slide Drawer bottom (17) into the grooves of Left drawer side (12), Right drawer side (14) and Drawer back (16) as shown.
Fix Drawer bottom support slat (18) onto Drawer back (16) with 2 x Screws (H) using a screwdriver.

14
X18
E
15
10
9
8
11
11
13
13
12
14
E
E
E
E
EE
E
EE
X12
CX3 L
x3
C
13
DL
DR
L(DR)
L(DL)
Position Drawer fronts (8), (9) and (10) onto Drawer sides (11), (12), (13),
(14) and Drawer bottom support slats (18).
Insert 18 x Cam nuts (E) into Drawer sides and Drawer bottom support
slats (18).
Use a screwdriver to turn clockwise to lock.
Fix Slider runner L (DL) onto the Left drawer sides with 2 x Screws (C) using a screwdriver.
Fix Slider runner L (DR) onto the Right drawer sides with 2 x Screws (C) using a screwdriver as shown.
Repeat with the remaining Drawers.
DR
DL
L

16
17
X2
BX4 C
B
CC
8
9
10
19
19
X2
AX12G
G
G
A
A
A
G
G
14
9
10
/
Attach 2 x Handles (B) to Drawer fronts (9) and (10) with 4 x Bolts (C) using a screwdriver as shown.
Slide drawer with Drawer Front (8) onto the top two slide tracks as shown.
Slide drawer with Drawer Front (9) onto the middle two slide tracks as shown.
Slide drawer with Drawer Front (110) onto the bottom two slide tracks as shown.
Attach 2x Hinges (A) to Door (19) with 4x Screws (G) using a screwdriver.
Attach Door (19) to Right side panel (4) with 8 x Screws (G) using a screwdriver as shown.
4
If necessary, adjust the Hinges (A) using a Screwdriver.

IIIIII
IIIIII
IIIIII
X8
K
X2
H
K
H
18
15
Fix Back support panel (6) to Divider (5) with 2 x Screws (H) using a screwdriver.
Fix 8 x Back panel holders (K) to assembled unit with 8 x Screws using a screwdriver.
6

19
wall
O
M
N
NO
MX2 X4 X2
16
Fix the 2 x Wall straps (M) with 2 x Screws (O) and 2 x Washers (N) to the backside of Top panel as shown.
Move the Sideboard into position against a wall.
Mark suitable positions for the wall fixings.
Follow instructions to install the wall fixings onto the wall.
Reposition the Sideboard and fix the Wall straps (M) and 2 x Washers (N) to the wall with wall fixing.
Assembly is complete.