TEMPLE & WEBSTER BZISBROK User manual

ASSEMBLY INSTRUCTIONS
BZISBROK
Read these instructions and follow steps carefully to ensure you assemble the product correctly
and avoid damages.
Check that all parts hardware have been provided before assembling the products.
Place all contents on a clean, soft-flat surface to avoid scratching the product.
CAUTION:
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all hardware.
To prevent damage to threads, do not use a power tool and do not over tighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll on to legs.
Keep all hardware and small parts away from children
2 PERSON RECOMMENDED
Read these instructions and follow steps carefully to ensure you assemble the product

BOX 1 BOX 2
1x PIECE 01
1x PIECE 02
1x PIECE 08
2x PIECES 09
1x PIECE 10
3x PIECES 05
2x PIECES 03
2x PIECES 04
plastic bag
with all hardware
3x PIECES 06
3x PIECES 07

Fx8
φ15x12 M6x35 φ8x40 M3.5x15
M6x40
∅12xM6x1
M6
M6x55
Ax16
Ix12
Mx1
Jx8
Bx16 Cx16
Gx20
Nx2 Ox1
Hx20
Dx60
Ex6
Kx1
Px4
Lx6
M6x35
Qx4 Rx4 Sx4 Tx4
M4x37 M4x17
Ux2 Vx12
Wx16

Fx8 Kx1 Nx2
Mx1 Ox1
Jx8 Kx1
Gx12 Hx12
Gx8 Hx8
Px4
K
F
H
GP
H
G
P
K
J
H
G
O
M
N

Bx8 Cx8
Ax8
BC
A

Bx8 Cx8
C
B

Ax8
A
V
Vx12
* Use provided stickers to cover screws
Wx16
W

L
L
E
E
X3
D
Ex6 Lx6 Dx48

push it down
push it up

push it up
push it down

Dx12 Ix12
Q
Qx4
I
D

S
R
Rx2 Sx4
Rx2 Tx4
R
T

Ux2
U

STANDARD TIP KIT INSTRUCTIONS
FITTINGS AND PARTS CHECKLIST
Notice: Important Warning
Notice: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend
installation of the anti-tip kit included with this product.
Attaching furniture to wall with anti-tip kits
1. Determine where the piece is to be placed and mark location on the wall for the mounting bracket screw holes.
They should be placed approximately 1” below the top on the back of the piece of furniture.
2. Drill the hole and use the appropriate wall plug that is suitable for your walls composition.
Warning: Before drilling check wall for hidden pipes and cables.
3. Attach the mounting bracket horizontally to the wall using appropriate fastener，through the holes in the bracket and
2 wall plugs that are suitable to your wall and then tighten securely.
. Lace the nylon strap down through the brackets and shelf. Slide the thin end of the strap through the receiving end on
the nylon strap. Pull to tighten the piece of furniture snug against wall.
CARE INSTRUCTIONS:
1.
2.
The installation tips for wall anchors
*
x4
x4
x4
x4x2
5
Next using the short screws attach the 2nd bracket to the back of the plece of furniture's top.
.
4
Tip1.
Wood
Brick or Masonry
Tip2.
Cavity Wall
Tip3.
If fixing to wood make sure that it isn’t
chipboard as screws can easily pull away from
the core structure
Special toggle wall plugs are needed.Please seek
expert advice
Use an appropriate wall plug, provided you are
sure your wall is sound.
＊
*USE APPROPRIATE
FASTENER BASED UPON
WALL COMPOSITION
(SEE BELOW)
WALL
BACK
SIDE
ee
aa
bb
dd
aa
aa
cc
Item Item
Hardware may loosen overtime. Periodically check that all connections are tight and re-tighten as necessary.
Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners.