Torque X-LAB-EDGE User manual

X-LAB-EDGE
Assembly Guide
PART #: 5518701-A
VERSION: XLE-X3

XLAB-701
XLAB-701
XLAB BOOT
XLAB BOOT
STEP 1
PAGE 2

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
XLAB-701
GRT-101
XLAB-701
GRT-101
BATTLE ROPE
CONNECTOR
PAGE 3
STEP 2
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-701XLAB-701
XLAB-401
XLAB-401
1/2 X 3-1/2" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
TOP CONNECTOR
PAGE 4
LOOSELY assemble bolt connections in this step.
STEP 3

XLAB-BOOT
XLAB-301
XLAB-301
XLAB-BOOT
PAGE 5
STEP 4

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-301
XLAB-401XLAB-401
SUSPENSION
CROSS
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
PAGE 6
STEP 5
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-301
XLAB-701
XLAB-701
AT-101
AT-101
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
STEP 6
LOOSELY assemble bolt connections in this step.
PAGE 7

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-301
MID
CONNECTOR
BATTLE
ROPE
HANGER
BATTLE
ROPE
HANGER
AT-101
AT-101
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (12)
1/2" LOCK NUT (6)
XLAB-701 XLAB-701
1/2 X 3-1/4"
BOLT
1/2 X 3-1/4" BOLT
1/2 X 3-1/4"
BOLT
1/2 X 3-1/4" BOLT
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (12)
1/2" LOCK NUT (6)
PAGE 8
LOOSELY assemble bolt connections in this step.
STEP 7

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-301
XLAB-701
AT-101
XLAB-AA-101
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
1/2 X 3-1/2" BOLT
1/2" FLAT WASHER (2)
1/2" LOCK NUT
STEP 8
LOOSELY assemble bolt connections in this step.
PAGE 9

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
XLAB-701
AT-101
XLAB-301
XLAB-AA-101
1/2 X 3-3/4" BOLT (4)
1/2" FLAT WASHER (8)
1/2" LOCK NUT (4)
1/2 X 3-1/2" BOLT
1/2" FLAT WASHER (2)
1/2" LOCK NUT
STEP 9
LOOSELY assemble bolt connections in this step.
PAGE 10

NOTE:
MAKE SURE TABS OF THE COVER ARE INSERTED
INTO THE GROOVES OF THE BRACKET 6 PLACES
BRACKET COVER BRACKET COVER
SUSPENSION
CROSS
TABS
GROOVES
BRACKET
COVER
ATTENTION:
SECURELY TIGHTEN ALL BOLT CONNECTIONS FROM THE
PREVIOUS STEPS BEFORE COMPLETING THIS STEP.
STEP 10
PAGE 11

XCC-101
XCC-101
PAGE 12
STEP 11: XCC-101 ASSEMBLY
ATTENTION:
ASSEMBLE THE XCC-101 TO THE XLAB EDGE USING
THE INSTRUCTIONS INCLUDED WITH THAT PRODUCT.

XLAB-AA-101
XLAB-PLYO STEP
PEGS
HOOKS
ASSEMBLED VIEW
PAGE 13
STEP 12
WARNING!
MAKE SURE THAT BOTH HOOKS OF PLYO STEP ARE SEATED
SECURELY IN GROOVES OF PEGS ON ATTACHMENT ANCHOR
BEFORE PERFORMING ANY EXERCISES.

XLAB-AA-101
XLAB-DA-101
HOOKS
PEGS
ASSEMBLED VIEW
STEP 13
PAGE 14
WARNING!
MAKE SURE THAT BOTH HOOKS OF DIP ATTACHMENT ARE
SEATED SECURELY IN GROOVES OF PEGS ON ATTACHMENT
ANCHOR BEFORE PERFORMING ANY EXERCISES.

ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
ANCHOR
HOLES (4)
BASE
PLATE
WARNING!
ALL XLABS ARE REQUIRED TO BE ANCHORED TO THE
FLOOR TO PREVENT ROCKING OR TIPPING DURING USE.
PAGE 15
ANCHOR STEPS:
1) Position machine in desired location.
2) Trace around the four base plates and the
four holes in each base plate.
3) Move machine.
4) Drill anchor holes. Follow instructions on
anchor bolt packaging.
5) Vacuum dust out of each anchor hole.
5) Move machine back over anchor holes.
6) Anchor machine. Follow instruction on
anchor bolt packaging.