TP-Link Kasa Smart KE100 KIT User manual

User Guide
Kasa Smart Thermostatic Radiator Valve Starter Kit
KE100 KIT
© 2023 TP-Link 1910013320 REV1.0.0

Contents
About This Guide ··························································································1
Introduction ·····································································································2
Appearance-Kasa Hub··············································································3
Appearance-Thermostatic Radiator Valve·····································4
Install Your Device ·······················································································7
Set Up Your Kasa Devices ···································································11
Main Device Controls··············································································13
Manage Device Settings ·······································································25
Voice & 3rd Party Support····································································34
Authentication·····························································································38

1
About This Guide
This guide provides a brief introduction to Kasa Smart Thermostatic Radiator Valve Starter Kit and the Kasa Smart app, as well as regulatory
information.
Please note that features of Kasa Smart Thermostatic Radiator Valve Starter Kit may vary slightly depending on the model and software version you
have, and on your location and language. All images, steps, and descriptions in this guide are only examples and may not reect your actual experience.
Conventions
In this guide, the following convention is used:
Convention Description
Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
• Specications can be found on the product page at https://www.tp-link.com.
• Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.

2
Introduction
Kasa Smart Thermostatic Radiator Valve Starter Kit include a Kasa Smart Thermostatic Radiator Valve and a Kasa Smart IoT Hub.
Kasa Smart Thermostatic Radiator Valve provides superior temperature control precision from the moment it is installed. Get the exact temperature
you set. Nothing more. Nothing less. Featuring a much faster reaction time than traditional radiator valves, restores the comfort temperature in no time.
• Voice Control - Hands-free control that syncs with Amazon Alexa, Google Assistant, or Siri ShortCuts.
• Schedule - Make sure it is as hot as you need with presets and schedules that suit your life.
• Frost Protection - Keep your pipes unfrozen and your house safe.
• Ultra-Long Standby - Works with loT hub, promising longer battery life (over one year).
• Up to 32 Radiators - Each hub can connect and manage up to 32 radiators.

3
Appearance-Kasa Hub
With superior ultra-low-power performance, Kasa Hub connects wirelessly with compatible Kasa accessories. So you can easily control and monitor
your home from anywhere. See the detailed explanation below:
1
SYNC Button
Status LED
3
Speaker
2
Blinking orange and blue
Ready for setup
.
Blinking blue quickly
Pairing with Kasa accessory
Solid orange
Oine
Blinking blue quickly
Connecting to Wi-Fi
Solid blue
Starting up
Solid Blue
Connected to Cloud
Single press
Enter pairing mode;
Silence when ringing.
Press and hold for 5s
Only reset Wi-Fi settings
and keep other settings.
Press and hold for 10s
Restore your hub to factory
default settings.

4
Appearance-Thermostatic Radiator Valve
The Kasa Smart Thermostatic Radiator Valve has LEDs to show you the current status of Wi-Fi, Schedule, Heating, Battery and Temperature. It also has
a control knob for temperature adjustment and a SYNC/ RESET button. See the detailed explanation below:
LEDs:
Temperature
Appearance
Heating Battery
Wireless Schedule
Indicates the position of the display
LED Explanations
LED
Wireless
Schedule
Heating
LED Status
Blinking fast
Solid on
Solid on
Solid on
LED is off
Blinking
Solid on
Battery
Event
Pairing;
Device resetting
Pairing complete
Blinking slowly Ready to be paired;
Offline
Adjust temperature
based on your schedule
Raise temperature
Keep/lower temperature
Low battery
Sufficient battery
power

5
LED
Temperature
Event
Valve blocked by calcification
*You can rotate the LED display 180° in the Kasa Smart app.
Starting up
Calibrating
Frost protection
Low battery:
Valve can’t work properly
Sleep mode
Child lock enabled
No valve detected or valve
not compatible
LED Status
Displaying
Displaying
Moving light, then displaying normal temperature
Blinking twice, then blinking , finally displaying normal temperature
Switching between and the normal temperature
Switching between and the normal temperature
Displaying
Displaying

6
Button Operation Result
Control
Knob
SYNC/
RESET
Rotate clockwise
Rotate counterclockwise
Rotate with no shown
display
Lower temperature.
Restore to factory default
settings, and enter pairing
mode.
Activate the display. Then
you can rotate to adjust
the temperature.
Raise temperature.
Press and hold for
5seconds
Button Explanations
SYNC/RESET
Control Knob
Compatible Batteries:
Battery Type Battery Voltage Work Temp.
AA LR6 alkaline battery 1.5V 0℃-40℃
Note: Do NOT use rechargeable batteries or 1.2V AA batteries.

7
Install Your Device
Follow the instructions below to install your Kasa Smart Thermostatic Radiator Valve.
01 / Check Compatibility
1. Check existing valve type
There are two types of valves: Thermostatic and Manual. Kasa Smart Thermostatic Radiator Valve is only compatible with the thermostatic valve.
Note: Manual valves are not compatible with Kasa Smart Thermostatic Radiator Valve, such as the ones in the following pictures.
Thermostatic Valve
Manual Valve

8
2. Check the connector type
If your connector is M30 x 1.5, you can screw the new valve onto the radiator directly.
If not, check whether one of the provided adapters ts the connector. If none of them t your connector, please purchase a proper one yourself.
M30 x 1.5
RA Adapter
30mm
1.5mm
RAV Adapter
RAVL Adapter

9
02 / Install Requirements
Read the following instructions rst before installing the new valve:
1. Install the valve rst before powering it up.
2. No need to shut o water before changing the radiator valve. Water will not leak.
3. Avoid installing the valve in the same room where you have installed the boiler thermostat.
4. Install the valve within range of your Kasa smart hub if you wish to control it using the Kasa Smart app.
03 / Install the Valve
1. Unscrew the existing valve.
Vertical InstallationHorizontal Installation
2. Screw the new valve directly (for M30 x 1.5 connector) or after installing the proper adapter (for
non-M30 x 1.5 connectors). The ▲ at the bottom of the valve indicates the position of the display.

10
3. Remove the cover of the valve by rotating counterclockwise using the
provided cover-opener.
4. Open the battery cover and insert two AA LR6 Alkaline batteries. Make
sure the positive and negative terminals face the correct direction.
*Do NOT use rechargeable batteries or 1.2V AA batteries.
Note: you can still adjust temperature manually without a hub. After
inserting the batteries, the valve is ready to use. Rotate the valve to
increase / decrease temperature.

11
Set Up Your Kasa Devices
If you want to remotely control / manage the valve, you need to add a Kasa smart hub rst.
OR
Step 1 Download Kasa Smart App
Set up a Kasa smart hub in the Kasa Smart app if you haven’t already
done so. You can get the Kasa Smart app from the App Store or Google
Play.
Step 2. Log In
Open the app, and log in with your TP-Link ID. If you don't have an
account, create one rst.

12
Step 4. Add Your Smart Thermostats Radiator Valve
Tap the + button and select your model. Follow the app instructions to
pair the valve and complete setup.
Step 3. Add Your Hub First
Tap the button in the app and select your model. Follow app instructions
to set up your hub.

13
Main Device Controls
After you successfully set up your smart thermostatic radiator valve, you will see the home page of the Kasa Smart app. Here you can view and manage
all devices that you've added to Kasa. Tap a smart thermostatic radiator valve to control and manage it.
Home Page
You can see all your Kasa devices listed in the
Home page.
Turn on/o the smart thermostatic radiator valve
Turn on/o your smart thermostatic radiator valve quickly by tapping on the device list. You can
also achieve it on the status page.

14
Increase/Decrease the heating temperature
You can check the current temperature and increase/decrease the heating temperature by
dragging the point or tap - and +.

15
Smart Control
By setting up your own set of rules, turn on/o your radiator valve automatically to control the heating temperature according to your daily routine.
1. Tap your smart thermostatic radiator in
the Home page, and then Tap to set
smart control rules.
2. Turn on Smart Control and tap Schedule
Days.

16
3. You can also choose day pattern for your smart control.
E.g. I want my smart thermostatic radiator valve to turn on and heat to the temperature of 25℃between 7:00 AM to 20:30 PM every weekday and 10℃
for weekends. Here I should choose Mon - Fri, Sat, Sun.
Make your thermostatic radiator valve heat based on one set of rules every day.
Make your thermostatic radiator valve heat based on three sets of rules for weekdays,
Saturday and Sunday respectively.
Make your thermostatic radiator valve heat based on dierent sets of rules for every day.

17
4. For the rst set of schedule rules from Monday to Friday, tap Edit Rules and then ADD RULE to
add an eective time for your Smart Control.

18
5. To adjust the time, you can drag the end points of the whole
segment or simply roll down and set the time at the button of the page.
6. Set the heating temperature at the
buttomnof the page.