Trinity 3-Tier Slat Shelving Rack User manual

OWNER’S MANUAL
3-TIER 36” x 14” x 35”
SLAT SHELVING RACK

Your 3-Tier Slat Shelving Rack should include the following parts. Please inspect box contents to ensure
you have received all components.
You will need no additional tools for assembly.
PARTS LIST
A B
SLIP SLEEVES
(24) + (2) extra
C
Please inspect box contents to ensure you have received all components.
Note: The black circular plastic tops in between the shelves are used only for packaging purposes. They
are NOT NEEDED. Please discard.
SHELF (3)
D
FEET LEVELER (4)
POLE (4)
End Cap (4) and Threaded
Insert (4) are pre-installed
If you are missing any parts, need assistance with assembly or have questions, please contact our
Customer Service. Parts can also be requested online at our customer center at our website.
2

ASSEMBLY INSTRUCTIONS
* For safety and stability, the lowest shelf should be lower than the 3rd notch from the bottom.
** Note: There will be a very small gap in-between the SLIP SLEEVES—this is normal.
Each POLE (A) has slight horizontal line indentations at
1” intervals. Each SLIP SLEEVE (C) has raised
horizontal lines on the inside, designed to lock them in
place on the POLE (A).
On each POLE (A), place 1 pair of SLIP SLEEVES (C) at
the desired level. Please make sure the arrow faces
up and that the word “TOP” is right side up. Do this
for each POLE (A), and make sure that the heights are
identical for each POLE (A).
Slide the pair of SLIP SLEEVES (C) until you hear a click
to confirm the pair is locked onto the POLE (A). DO
NOT place more than one pair on each POLE (A) at a
time.
Place SHELF (B) on its side and slide the (4)
BOTTOM POLES (A) through the holes in the
SHELF (B). Make sure that the SHELF (B)
corner cylinders are positioned over the SLIP
SLEEVES (C).
Stand the unit upright and install the
remaining (2) SHELVES (B).
**Use a rubber mallet, if needed, to secure
the shelves.
3
STEP 1: SLIP SLEEVES
STEP 2: INSTALLING SHELVES
A (4) C (8)
C (16) B (3)
*Note: The level side of the SHELF (B) is the
TOP side (our logo on the corner cylinders
should be right-side up.)

ASSEMBLY INSTRUCTIONS
4
STEP 3: FEET LEVELERS
Screw FEET LEVELER (D) into POLE (A) and adjust as needed to
ensure your shelving rack is level.
D(4) A (4)

WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
3. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
4. Check for damaged parts.Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
5. Do NOT overload the product.
CARE AND MAINTENANCE
•Avoid harsh, abrasive cleaners, and other corrosive chemicals
•This item is not certified for outdoor use
Weight capacity per shelf 350 lb (evenly distributed)
Total weight capacity of rack 1050 lb (evenly distributed)
6

First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
8
Thank you for purchasing a 3-Tier Slat Shelving Rack. In order to register your product and
receive streamlined customer service, please fill out the following Product Registration Form
and (1) fax the form (2) complete the Product Registration Form online at our website or (3)
scan and email the form to us. Include a copy of your original receipt with your submission.
Product Model #: Purchase Date: / /

1 YEAR LIMITED WARRANTY
LIMITATION OF REMEDIES AND LIABILITY
3-Tier Slat Shelving Rack
10
We warrant to the original consumer purchaser (“Purchaser”) of the 3- Tier Slat Shelving Rack (“Product”) that
each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of
original purchase. Our obligation under this warranty shall be limited to repair or replacement of, or
adequate compensation for the Product which shall not be greater than the amount of the purchase price of
the Product, at the option of us, during the warranty period.
All replaced parts and Products become the property of us and must be returned to us.
We (and our employees, officers, members, managers, affiliates an assigns) shall not be liable for any
incidental, consequential, special, indirect, remote, special or punitive damages for breach of any warranty,
express or implied, including, but not limited to, lost profits, lost savings, loss of anticipated benefits and
attorneys’ fees, which arise out of the purchase, use or inability to use the Product, whether arising out of
contract, negligence, strict tort, product liability, or any other legal theory on which a claim is based. As
noted above, to the extent damages are allowed by our express warranty or by applicable law, those
damages may not exceed the purchase price paid for the Product. Without limiting the foregoing Purchaser
assumes all risk and liability for loss, damage or injury to Purchaser and Purchaser’s property and to others
and their property arising out of the use, misuse, or inability to use this Product. This limited warranty shall
not extend to anyone other than the original purchaser of this product, is nontransferable and states your
exclusive remedy.
Some states do not allow the exclusion or limitation of incidental, consequential, special, or punitive
damages, so the above limitation or exclusion may not apply to you. The above warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
QUESTIONS? NEED PARTS?
WE ARE HERE TO HELP!
Please feel free to contact us. There are no questions too small, or
any problems too big. We’re committed to providing our customers
with the highest level of service.
CONTACT US