Turnigy Extra 330L Operation instructions

CAUTION : this plane is not a toy and should be kept away
this manual.
●First-time builders should seek advice from people having building
experience in order to assemble the model correctly and to produce its
●Assemble this kit only in places out of children’s reach!
●Take enough safety percautions prior to operating this model.
You are responsible for this model’s assembly and safe operation!
●Always keep this instruction manual ready at hand for quick
reference,even after completing the assembly.
children under 16 years of age! Before use , please carefully read
Flying Weight:520g;
Wing Span:38.7in/980mm;
Wing Area:19sq.dm;
Outer Runner Brushless Motor.
Length:34.6in/880mm;
Radio:4channels 3servos;
performance to full extent .
P.1

Cut away covering film for
the servo.
Put the servo into the
hole.
Pull out the servo
extension from main wing.
AILERON SERVO
P.2

Connect the aileron and
the main wing by hinges.
Be sure to apply instant
type glue to both sides
of each hinges.
Bent the pushrod as shown.
Link the servo arms and
tri-horns with pushrod.
P.3

Connect the main wings and
the fuselage with joiner.
Use two 4mm nylon bolts of
each sides to ensure the wings
fixed upto the fuselage.
Find and cut the hole for
vertical fin.
Find and cut the hole for
stabilizer assembly and
rudder servo .
ELEVATOR & RUDDER SERVO
P.4

Insert and glue the vertical fin .
Assemble the rudder servo.
Insert and glue the stabilizer.
Assemble the elevator servo.
Apply instant type glue
to both sides of each
hinges of the rudder.
P.5

Screw four TP screws to
fix up the tail wheel on
the tail of the fuselage.
As shown in picture, This is
finished for the tail wheel.
Install the wheels to the
landing gear.
LANDING GEAR
P.6

Find and cut the hole for
landing gear assembly.
Screw two TP screws to lock
the landing gear to the
fuselage.
Slide the rubber backed
washers on the hatch mounting
bolts and insert bolts through
the hatch mounting holes and
into the fuse blind nuts.Tighten
snugly but do not over tighten
and crush the hatch or the fuse
sides.
CANOPY
P.7

Movable canopy is
convenient for you to install
batteries and ESC ect.
Gather Motor,ESC,battery
and spare parts as shown.
Fixup the the motor before
install to the model.
MOTOR
P.8

Install the motor to motor
mount by 4 screws.
The finished picture
as shown.
Install the battery and
the ESC as shown.
Install the cowling with 4 TP
screws.
P.9

Warning: Never jump this step before flight.
Adjustment
P.10

CG POSITION & CONTROL THROWS
P.11

FINISHED PHOTO
P.12

children under 16 years of age! Before use , please carefully read
P.13

P.14

P.15

each sides to ensure the wings
P.16