Turnstiles OMD22 User manual

USER MANUAL
Date: January 2022 | Doc Version: 1.0
OMD22

User Manual
Disclaimer
This manual contains information on the proper operation and maintenance of the
OMD22 turnstile. The copyright in all the documents, drawings, etc. in relation to
vests in and is the property of TURNSTILES.us.
The contents of this manual should be read before starting the operation and
maintenance of the OMD22 turnstile. If any of the content of the manual seems
unclear or incomplete, please contact us before starting the operation.
www.TURNSTILES.us | [email protected] | 303-670-1099
1

User Manual
TURNSTILES.us reserves the right to add, delete, amend, or modify the information
contained in the manual from time to time in the form of circulars, letters, notes, etc.
for better operation and safety of the OMD22 turnstile. Additions or amendments
are meant for improvement /operation of OMD22.
TURNSTILES.us shall in no way be responsible (i) in case OMD22 malfunctions due
to any non-compliance of the instructions contained in this manual,(ii) in case of
operation of OMD22 beyond its rate limits, and (iii) in case of operation of OMD22 in
environmental conditions different from the conditions prescribed in the manual.
OMD22 will be updated from time to time without prior notice. The latest operation
procedures and relevant documents are available on http://www.TURNSTILES.us
If there is any issue related to OMD22, please contact us.
TURNSTILES.us, Inc.
www.TURNSTILES.us
For business-related queries, please write to us at
[e-mail].
www.TURNSTILES.us | [email protected] | 303-670-1099
2

OMD22 User Manual
About The Company
TURNSTILES.us is a leading integrator, installer, and supplier of safety & security
products which incorporate advanced biometric hardware & software solutions.
About The Manual
This manual advises on proper operation of the OMD22 turnstile. All figures
displayed are for illustration purposes only. Figures in this manual may not be
exactly consistent with the actual system components.
www.TURNSTILES.us | [email protected] | 303-670-1099
3

User Manual
Document Conventions
Conventions used in this manual are listed below:
< > Button or key names for devices. For example, press <OK>.
[ ]
Window names, menu items, data table, and field names are
inside square brackets.
For example, [New User] window will pop-up.
/Multi-level menus are separated by forward slashes.
For example, [File/Create/Folder].
Symbols
Convention Description
Instructions worthy of special attention
General information which aids in operation
Important instructions
Take caution to prevent problems.
Pay extra special attention.
GUI Conventions
Convention Description
www.TURNSTILES.us | [email protected] | 303-670-1099
4

OMD22 User Manual
TABLE OF CONTENTS
1 OVERVIEW ............................................................................................................ 7
1.1 FEATURES...................................................................................................
1.2 DIAGRAM AND SYSTEM COMPONENTS....................................................
1.3 MECHANICAL SYSTEM.............................................................................
1.4 ELECTRONIC CONTROL SYSTEM..............................................................
1.5 WORKING PRINCIPLE................................................................................
1.6 TECHNICAL SPECIFICATIONS...................................................................
8
9
12
12
13
14
2 FUNCTION INTRODUCTION .................................................................................
2.1 PEDESTRIAN'S CARD/PHONE/BIOMETRIC VERIFICATION......................
2.2 WALK-THROUGH METAL DETECTION.......................................................
2.3 DETECTION SETTING ADJUSTMENT........................................................
15
16
17
15
3 TURNSTILE CONTROL PANEL .............................................................................
4.1.1 OPERATIONAL PROCEDURE.......................................................................
4.1.2 SENSITIVITY SETTING ADJUSTMENT........................................................
4.1.3 OPERATING FREQUENCY............................................................................
4.1.4 BUZZER SETTINGS......................................................................................
4.1.5 ALARM TIME................................................................................................
4.1.6 DATE AND TIME...........................................................................................
4.1.7 SENSITIVITY RANGE....................................................................................
4.1.8 APPLICATION...............................................................................................
4.1.9 DATA STORAGE............................................................................................
4.1.10 RELAY SETTINGS.......................................................................................
4.1.11 LOGIN PASSWORD.....................................................................................
4.1.12 NETWORK SETTINGS................................................................................
4.1.13 RESTORE....................................................................................................
4.1.14 ABOUT.........................................................................................................
20
21
22
22
22
23
23
24
24
24
25
25
26
26
19
4 MENU INTRODUCTION ........................................................................................20
4.1 WALK-THROUGH METAL DETECTOR FEATURES...................................... 20
www.TURNSTILES.us | [email protected] | 303-670-1099
5

OMD22 User Manual
4.2 SWING-BARRIER TURNSTILE MENU..........................................................
4.3 DEFAULT PARAMETERS ............................................................................
4.4 ERROR CODES ...........................................................................................
27
39
42
5 WIRING DIAGRAM ...............................................................................................43
6 PARTS INCLUDED IN PACKAGING ......................................................................44
APPENDIX ............................................................................................................. 45
WARRANTY CARD ................................................................................................. 46
4.2.1 MODE 1 (HIGH SECURITY).........................................................................
OMD22 scans inbound AND outbound for valid credentials and concealed metal
objects. Deters workplace violence and prevents both unauthorized access & employee
theft
4.2.2 MODE 2 (MEDIUM SECURITY)....................................................................
OMD22 only scans INBOUND for valid credentials and metal objects. Deters
workplace violence and prevents unauthorized access.
4.2.3 MODE 3 (MEDIUM SECURITY)....................................................................
OMD22 scans only OUTBOUND for valid credentials and/or metal objects. Prevents
employee theft.
4.2.4 MODE 4 (LOW SECURITY)...........................................................................
OMD22 scans neither inbound nor outbound. Swing barriers open whenever IR sensors
detect a pedestrian entering the turnstile lane. Used to slow down and channel pedestrian
traffic, or when emergencies arise which necessitate quick evacuation.
4.2.5 MODE 5 (HIGH SECURITY)..........................................................................
OMD22 scans inbound for valid credentials and metal objects. Restricts ALL
outbound pedestrians. Used in lockdown scenarios.
4.2.6 MODE 6 (HIGH SECURITY)..........................................................................
OMD22 restricts all pedestrians from entering, regardless if they have valid credentials or not
carrying metal objects. Outbound pedestrians are only permitted to exit if they are authorized
and/or carrying no metal objects.
4.2.7 MODE 7 (HIGH SECURITY)..........................................................................
OMD22 allows all pedestrians to enter, regardless if they are authorized or carrying metal
objects. All outbound pedestrians are prevented from exiting the building , regardless if they
have valid credentials or carrying metal objects. Used when someone inside the building is
suspected of wrong-doing and needs to be prevented from escaping.
4.2.8 MODE 8 (HIGH SECURITY)..........................................................................
OMD22 denies entry to pedestrians, regardless if they are authorized or not carrying
metal objects. All outbound pedestrians are NOT scanned and are free to exit. Used when
emergencies arise which necessitate quick evacuation.
4.2.9 MODE 9 (HIGHEST SECURITY)...................................................................
OMD22 prevents BOTH inbound AND outbound pedestrians from entering or
leaving the building. Used during lockdown scenarios.
4.2.10 MODE 10 (NO SECURITY).........................................................................
OMD22 scans neither inbound nor outbound pedestrians. Swing barriers always
REMAIN OPEN. Used to slow down and channel pedestrian traffic, or when emergencies
arise which necessitate quick evacuation.
27
27
28
28
28
29
29
29
30
30
www.TURNSTILES.us | [email protected] | 303-670-1099
6

User Manual
OMD22 is a one -of-a-kind innovative turnstile with integrated metal detection . Being
able to quickly and precisely search for concealed metal objects hidden in
pedestrians’ pockets or clothes can dramatically boost the efficiency & safety of
security checks.
When pedestrians approach OMD22, verify their identity (card, phone, biometric, etc.),
and have no metal items, the traffic indicator of the turnstile will turn green and open
automatically so that pedestrians can access the secured area on the other side of
the turnstile.
If however, the OMD22 turnstile detects pedestrians carrying metal objects whose
detected-sizes are larger than the pre-set values, the turnstile will immediately trigger
an alarm, and an Alarm Zone LED will turn red. OMD22 will remain locked so that the
pedestrian cannot access the secured area on the other side of the turnstile.
By combining metal detectionandaccesscontrol, OMD22 enhances the effectiveness
of any security system. This also helps automate the screening process, which lessens
the dependency on paid security guards. The OMD22 turnstile is ideally installed
before any entrance and exit requiring security inspection, such as retail distribution
centers & warehouses, government buildings, metro stations, airports, offices,
and schools.
1. OVERVIEW
www.TURNSTILES.us | [email protected] | 303-670-1099
7

User Manual
Stylish Design includes rugged swing barriers which restrict pedestrian access
Integrated 15-zone metal detector provides safety & security while also
preventing employee theft.
Double Verification: Card/Phone/Biometric authentication and Metal Detection
Small 5 x 6 ft (1.5 x 2 meters) footprint achieved by combining a turnstile PLUS
a metal detector into one compact integrated device.
Can be ordered with integrated RFID or biometric access control readers
Brushless DC motor (MCBF 10 million)
Durable: SUS304 stainless steel case that ensures long-lasting operation.
15 overlapping metal detection zones; 250+ adjustable sensitivity levels for
each zone.
1.
2.
3.
4.
5.
1.1 FEATURES
6.
8.
7.
www.TURNSTILES.us | [email protected] | 303-670-1099
8

User Manual
Multiple LEDs allow security personnel to quickly & precisely locate and
remove concealed metal objects from pedestrians. This reduces
pedestrian wait time standing in line to be screened.
Safe: Harmless to heart pacemakers, pregnant women, magnetic floppy
disks, recording tapes, etc.
Digital Pulse Technology: Excellent anti-interference performance
combining digital signal processing and filtering system.
9.
10.
11.
1.2 DIAGRAM AND SYSTEM COMPONENTS
The frame and most of the OMD22 components are made of SUS304
stainless steel, making the turnstile rust-proof, durable, and robust. The acrylic
metal-detection panelshave asimple and beautiful design with corrosion
protection. OMD22 provides safe, secure and orderly passage for pedestrians
and/or authorized personnel.
In case of emergencies, OMD22' swing-barriers automatically release and
allow pedestrians to freely exit the premises.
OMD22 design and dimensions are shown below:
Length
Height of pedestal
Height of metal detection panel
Width between metal
detection inner edges
Width between
pedestal inner edges
Width between pedestal outer edges
www.TURNSTILES.us | [email protected] | 303-670-1099
9

User Manual
System Components
OMD22 system components are shown
below:
1. Alarm Indicator 2. Walk-Through Metal Detector Panel
4. Option for Integrated 3rd Party Access
Control Reader
(for cards, phone, biometric, etc)
5. Turnstile Pedestal
3. Turnstile Infrared Sensors
7. Alarm Zone LEDs
9. Walk-Through Metal Detector
Infrared Sensors
8. Traffic Direction Indicator
6. Swing-Barrier
www.TURNSTILES.us | [email protected] | 303-670-1099
10

User Manual
Alarm Zone LEDs
There are five unique sets of precision LEDs distributed evenly on each metal
detection panel. Each panel is divided into 3 parts, resulting in a total of 15
overlapping metal detection zones (from bottom to top is zone 1, zone 2, zone
3, zone 4, zone 5).
When a pedestrian carries metal objects through the OMD22' metal detector,
the corresponding Alarm Zone LED on the panel will turn red and the alarm will
sound simultaneously. For example, if metal is detected by the LEFT PANEL,
corresponding LEDs in zones 1,4,7,10 or 13 will light RED. If however, metal is
detected by the RIGHT PANEL, corresponding LEDs in zones 3,6,9,12,15 will
light RED. And if metal is detected by BOTH panels (middle zones 2,5,8,11,14,
corresponding LEDs in BOTH PANELS will light red.
Walk-Through Metal Detector’s Infrared Sensors
When pedestrians or objects move through OMD22'walk-through metal
detector, the infrared sensors will accurately count pedestrians/passages and
trigger the alarm whenever metal is detected .
Turnstile Infrared Sensors
Once connected to the power supply, OMD22 will start operating. OMD22'
turnstile infrared sensors continually detect the position of pedestrians in the
turnstile lane. The IR sensors play a major roll in controlling the swing barriers
and preventing them from making incidental contact (aka "pinch") with
pedestrians. During installation, ensure the turnstile pedestals are properly
positioned because the IR sensors need to be in correct alignment so the IR
sensors can properly detect pedestrians passing through the turnstile.
Right pedestalLeft pedestal
www.TURNSTILES.us | [email protected] | 303-670-1099
11

User Manual
1.3 MECHANICAL SYSTEM
Walk-Through Metal Detector
The mechanical system of OMD22's Walk-Through Metal Detector is enclosed
inside OMD22's turnstile pedestals. The pedestals enclose the Alarm Indicators,
Infrared Sensors, Antennas, Alarm Zone LEDs, and Buzzers.
Swing Barrier Turnstile
The mechanical system of the Swing Barrier Turnstile is also enclosed inside the
pedestals, along with the Traffic Indicator, Turnstile Control Board, Infrared
Sensors, Motor, Frame, Bearing, and Swing-Barrier.
1.4 ELECTRONIC CONTROL SYSTEM
Walk-Through Metal Detector
The electrical system of the Walk-Through Metal Detector is comprised of Alarm
Indicators, Antennas, Infrared Sensors, Alarm Zone LEDs, and Buzzers.
Swing Barrier Turnstile: Normal - green; Alarm - red.
Antenna: Once OMD22 is connected to the power supply, the copper coils
installed inside metal detector panels will generate a magnetic field. When
pedestrians carrying metal objects pass in-between the panels, the magnetic field
will induce eddy currents inside the metal objects. These new currents generate an
additionalmagnetic field, which subsequently interferes with the original magnetic
field and triggers OMD22 to send visual and audio alarm signals, accordingly.
Alarm Zone LED: Alarm Zone LEDs installed on both sides of each
Walk-Through Metal Detector Panel accurately display the location of metal
objects concealed in the clothes or pockets of pedestrians.
www.TURNSTILES.us | [email protected] | 303-670-1099
12

User Manual
2.
Buzzer: If a pedestrian carries metal objects of asize exceeding a preset
parameter value, OMD22 will trigger an audible alarm.
Swing Barrier Turnstile
The electronic control system of the Swing Barrier Turnstile is comprised of an
optional 3rd party Access Control Reader (i.e. card, phone, biometric, Turnstile
Control Board, Infrared Sensor and Traffic Indicator. The pedestal has additional
space for an Access Control Panel.
Access Control Reader: OMD22 supports a wide variety of 3rd party access
control readers capable of recognizing ID cards, PIN codes, fingerprints, faces,
palms, mobile phone Bluetooth certificates, QR codes and other type
user-credentials.
Turnstile Control Board: Communicates with 3rd party access control panels.
Accordingly, the Control Board performs logical calculations and processes
signals while simultaneously sending commands to the Traffic Indicator, Electric
Motor, and the alarm.
Infrared Sensor: Detects the pedestrian'sposition inside the turnstile lane to
ensure the swing-barrier will not make incidental contact (aka "pinch") with the
pedestrian. It also acts as the trigger when the turnstile lane is programmed for
free egress (for exiting the premises).
Traffic Indicator: OMD22 will light up its red LED indicator whenever the swing-
barrier receives a "deny entry" command. Conversely, whenever a pedestrian
successfully passes the verification process (i.e. presents valid credentials and/or
isn't carrying metal), OMD22 will light up its green LED indicator and open its
swing-barrier. This LED indicator also displays the path direction and guides
pedestrians to walk through the turnstile lane safely and orderly.
1.5 WORKING PRINCIPLE
1. When you power on the Turnstile Control Board, OMD22 performs a
one-minute self-test.
When a valid credential (card, phone, biometric is verified by the 3rd
party access control reader and the size of the detected metal object
is less than the pre-set value, OMD22' Traffic Indicator will turn green,
indicating that the pedestrian's identity has been successfully
verified. The 3rd party Access Control Reader then sends a signal to
the 3rd party access control panel instructing OMD22 open its swing-
barriers.
www.TURNSTILES.us | [email protected] | 303-670-1099
13

User Manual
After OMD22 receives the signal from the 3rd party access control panel,
OMD22's Turnstile Control Board will send valid control signals to the
Traffic Indicator and OMD22' Turnstile's electric motor.
Pedestrians pass through turnstile lane according to the Traffic Indicator.
Infrared Sensors will detect the movement of the pedestrian and continue
sending signals to its Turnstile Control Board until the pedestrian passes
completely through the turnstile lane.
If a pedestrian enters the turnstile lane, but forgets to verify his or her
identity, or if their user credential is invalid, or if the metal object's
dimensions are larger than the pre-set values, OMD22 will trigger audible
and visual alarms and deny the pedestrian passage . Pedestrians can only
pass through the turnstile lane if they are not carrying metal objects and
have successfully verified with a valid credential (card, phone, biometric).
3.
4.
5.
Outbound Direction
Pedestrians only need to verify their identity when they are Inbound. When
travelling Outbound, if OMD22' Walk-Through Metal Detector triggers an
alarm, the security guard can subsequently inspect the pedestrian with a
Handheld Metal Detector (sold separately.
1.6 TECHNICAL SPECIFICATIONS
Features Specifications
Communication TCP/IP, RS485
Power Supply 100 to 240V, 50/60Hz
Work Frequency 5.7kHz to 9.6kHz
Metal Detection 15 overlapping zones
www.TURNSTILES.us | [email protected] | 303-670-1099
14

User Manual
Alarm Type Audible and visual indicators
Sensitivity 250+ adjustable increments
Relative Humidity <93% (non-condensing)
Working Temperature 32°F to 114°F (0°C to 45°C)
Motor Brushless DC
Infrared Sensors
Swing-Barrier: 7 pairs
Walk-Through Metal Detector: 2 pairs
Working Environment Indoor-use ONLY
67 x 28 x 711/2 in.
(1703 x 711 x 1816 mm.)
67 x 457/8 x 711/2 in.
(1703 x 1164 x 1816 mm)
Turnstile Lane Dimensions
(L*W*H)
External Chassis Dimensions
(L*W*H)
Certification FCC
2 FUNCTION INTRODUCTION
2.1 PEDESTRIAN'S CARD ( ) VERIFICATION
The Card Verification mode compares the card number read by the optional
3rd party CARD READER with the 3rd party external ACCESS CONTROL
PANEL. If the panel recognizes the card number, the panel will signal the
turnstile control board (installed in the OMD22 pedestal) to open the swing-
barrier.
also phone
& biometric
www.TURNSTILES.us | [email protected] | 303-670-1099
15

User Manual
pedestrian presents his/her
3rd party phone, biometric, and
OMD22 enters Card Verification mode only when a
card at the card reading area. Option available for
other types of readers and credentials.
Note: For Inbound direction, before the swing-barrier will open, there must be
no metal items with sizes over the pre-set value detected by the
Walk-Through Metal Detector.
2.2 WALK-THROUGH METAL DETECTION
When a card has been verified and the pedestrian has entered the turnstile lane,
the Walk-Through Metal Detector will sense whether there are metal objects
whose size exceeds the pre-set limit. If no metal is detected, the swing-barriers
will open for the pedestrian to pass through. Conversely, if pedestrians are
detected carrying metal objects whose size exceeds the pre-set value, OMD22
will immediately trigger the alarm, the Alarm Zone LEDs will turn red, and the
swing-barriers will remain closed.
Swing-barriers opened Swing-barriers closed
www.TURNSTILES.us | [email protected] | 303-670-1099
16

User Manual
Identification: Successful
Metal Detector: No Alarms
Swing-barriers: Open
Identification: Failed (note card rejected)
Metal Detector: No Alarms
Swing-barriers: Closed
Identification: Failed (note card rejected)
Metal Detector: Alarms (note red LEDs)
Swing-barriers: Closed
2.3 DETECTION SETTING
Pedestals must be installed in a stable position in order to achieve
optimal metal detection results. To check for proper stability, perform the
following steps:
a)
1.
Power on OMD22 and make sure it is not shaking after one minute.
There must be no alarm triggered when a testing person walks
through
the metal detector and is NOT carrying metal.
b)
Identification: Successful
Metal Detector: Alarms (note red LEDs)
Swing-barriers: Closed
www.TURNSTILES.us | [email protected] | 303-670-1099
17

User Manual
a)
You can reduce false metal detection alarms caused by small metal objects
such as rings, keys, belt buckle, shoes, and so on by following the steps
given below:
Choose a small piece of metal as a sample (Ex. small screw
driver). Increase the sensitivity on the metal detectorso that when
the testing person carries the sample through the metal detector, it
triggers the alarm and correctly lights up the red LED in the
corresponding metal detection panel.
Decrease the sensitivity a little, have the testing person carry the
SAME metal sample and walk through the detector again. If the
alarm continues to sound, once again, reduce the sensitivity until
the metal detector's alarms stop triggering when the metal sample
is passed through.
Note: You can adjust the sensitivity for each metal detection zone. . After
implementing the above adjustments, the metal objects smaller than the
sample will not trigger the alarm. Still however, metal objects larger than the
sample will be detected and will trigger the alarm, accordingly.
2.
b)
www.TURNSTILES.us | [email protected] | 303-670-1099
18

User Manual
3 CONTROL PANEL
The components of the Control Panel are given below:
Walk-Through Metal Detector
"The OMD22 Control Panel is enclosed inside the "master pedestal".
The sensitivity and working frequency of OMD22 must be
programmed BEFORE use, and it cannot be modified DURING use.
LCD: It displays the Pedestrian Passage Count, Alarm Count,
Password settings, and other information.
ESC: Press to discard the settings and exit the menu
: Decrease the parameter values.
:Increase the parameter values.
OK: Opens the menu, saves the settings, and exits the menu.
1.
2.
MENU: It is used to enter the Settings menu and to confirm the current
modified value.
1.
3.
4.
5.
There are 4 keys on the control panel, "MENU", "MODE", "ADD" and "DEC".
Swing Barrier Turnstile
www.TURNSTILES.us | [email protected] | 303-670-1099
19