U-Line H-3620 User manual

PAGE 1 OF 2 0914 IH-3620
πH-3620, H-4730
ADHESIVE TRANSFER
TAPE DISPENSER
1-800-295-5510
uline.com
OPERATION
1. Depress (A) and lift to open
cover. (See Figure 1)
A
B
3. Depress trigger and thread tape
leader/liner as shown. Stop end
of leader at point (C). Release
trigger and rotate rewind hub
(D) counter-clockwise to tighten
liner. Close cover. (See Figure 3)
CD
To start application:
4. Place applying roller (E) on
surface, depress trigger and pull
dispenser. (See Figure 4)
E
To end application:
5. Keep roller on surface, release
trigger and pull dispenser to
break adhesive. (See Figure 5)
Liner tension adjustment:
6. Press down (G) black center
tension adjuster. Turn (H)
clockwise to tighten the tension
of the liner. Turn (I) to loosen.
(See Figure 6)
G
H
I
TOOL NEEDED
Phillips Screwdriver
(optional)
Figure 1
Figure 4
Figure 2
Figure 5
Figure 3
Figure 6
2. Place tape roll on hub, insert
slot (B) in tape core slot.
(See Figure 2)

PAGE 2 OF 2 0914 IH-3620
OPERATION CONTINUED
(OPTIONAL) ADAPTER KIT FOR 1/4" TAPE
A
BAdapter Kit
for 1/4" Tape
C
G
F
E
D
Figure 7
7. Replace roller (A) with 1/4" wide
roller from kit. Secure with screw.
Place the Drive Gear Spacer (B)
from kit on tape core reel.
(See Figure 7)
8. Remove Rewind Hub (C), Spring
Retainer (E), and Spring (F).
(See Figure 7)
9. Assemble Outer Rewind Disk
(D), Spring (F), Spring Retainer
(E), and Inner Rewind Disk (G).
Position Inner Rewind Disk (G)
and Outer Rewind Disk (D) as
shown. (See Figure 7)
π CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com