U-Line SLIMFOLD H-3456 User manual

PAGE 1 OF 2 0721 IH-3456
SLIMFOLD™TOWEL
DISPENSER
1- 800-295-5510
uline.com
H-3456
PARTS LIST
INSTALLATION AND MOUNTING INSTRUCTIONS
NOTE: Recommended mounting height is 52"
from the floor to bottom of dispenser.
1. Insert dispenser key into hole in top of dispenser and
turn counterclockwise to unlock. (See Figure 1)
2. Open dispenser cover and hold dispenser to ideal
mounting place on wall. (See Figure 2)
3. Mark the four holes on the wall where screws will be
inserted. (See Figure 3)
Wall Anchor x 4 Screw x 4
Dispenser Key x 1
Dispenser x 1
Figure 1
Figure 2
Figure 3
TOOLS NEEDED
Drill Drill Bit Phillips Screwdriver

PAGE 2 OF 2 0721 IH-3456
4. Drill into wall at four marked locations with an
appropriate drill bit. (See Figure 4)
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition as
enclosed hardware may not be compatible
with your wall surface.
5. Hold dispenser to mounting place and insert screws
into previously drilled holes using either a screwdriver
or a drill. (See Figure 5)
6. Load towels into dispenser. Do not compress the
towels or overload dispenser. (See Figure 6)
7. Close and lock dispenser by turning key clockwise
to its original position. (See Figure 7)
8. Pull first towel out to begin dispensing.
(See Figure 8)
INSTALLATION AND MOUNTING INSTRUCTIONS CONTINUED
Figure 5
Figure 6
Figure 7
Figure 8
Figure 4
1
-800-295-551
0
uline.com