Unverferth NutriMax 1800 User manual

NutriMax®Liquid Applicator
1800 & 2600 Models
Serial Number B40640100 & Higher
Operator’s Manual
Part No. 415257
Refer to Part No. 415258 for Parts Catalog
Fertilizer Applicator

1800 & 2600 NutriMax Liquid Applicator — Introduction
2
Foreword
This symbol identifies important safety messages. When you see it, read the message
that follows and be alert to the possibility of personal injury.
Remember, safety instructions stated in this manual are for your protection. Read them care-
fully and follow them closely when working around or using this machine.
Read and study this manual completely before attempting to operate this implement. Take
this manual to the field for handy reference when operating, adjusting, or servicing your
machine.
When referenced, “Right-Hand” (RH) and “Left-Hand” (LH) side of the machine are determined
by standing behind the machine and facing in the direction of travel.

1800 & 2600 NutriMax Liquid Applicator — Introduction
3
Product Information
When ordering parts or when requesting further information or assistance, always give the
following information:
• Machine name
• Model
• Serial number
All products manufactured by Unverferth Mfg.  Co., Inc.  are warranted to be free from ma-
terial and workmanship defects for one full year from time of consumer delivery. Your local
dealer will gladly assist you with any warranty questions.
Please fill out and retain this portion for your records.
PurchaseDate_____________Model_________________SerialNumber_____________________________
Dealer ____________________________________ City ____________________________________________
Dealer Contact _______________________________ Phone ______________________________________
• Theinformation,specifications,andillustrationsinthemanualarebasedoninformationavailable
at the time it was written. Due to continuing improvements in the design and manufacture of
Unverferth products, all specifications and information contained herein are subject to change
without notice.
Serial Number
Decal Location

1800 & 2600 NutriMax Liquid Applicator — Introduction
4
Table of Contents
Introduction
Foreword................................................................................................................................................. 2
Product Information ................................................................................................................................ 3
Section I
Safety
General Hazard Information.................................................................................................................... 1-2
Safety Decals ......................................................................................................................................... 1-3
Following Safety Instructions.................................................................................................................. 1-4
Before Operating .................................................................................................................................... 1-5
Before Servicing ..................................................................................................................................... 1-6
During Operation .................................................................................................................................... 1-7
Before Transporting................................................................................................................................. 1-7
During Transport ..................................................................................................................................... 1-7
Pressurized Oil ....................................................................................................................................... 1-8
Chemical Hazards................................................................................................................................... 1-9
Clean Water Tank................................................................................................................................... 1-9
Preparing for Emergencies..................................................................................................................... 1-10
Wearing Protective Equipment................................................................................................................ 1-10

1800 & 2600 NutriMax Liquid Applicator — Introduction
5
Table of Contents
Section II
Set Up
Pre-Delivery Checklist........................................................................................................................ 2-2
Dealer Set Up ................................................................................................................................... 2-3
Closer Wheel Tank Guard Installation (Optional)............................................................................. 2-11
Tongue Adjustment .......................................................................................................................... 2-14
Units with Fixed Position Hitch (80’/88’/90’ Units) ................................................................. 2-14
Units Equipped with Steerable Hitch ....................................................................................... 2-14
Axle Tread Settings ......................................................................................................................... 2-15
Wheel Spacing Combinations ................................................................................................... 2-15
Adjustment ................................................................................................................................ 2-16
Tracks Toe In Adjustment......................................................................................................... 2-19
Belt Conditioning ............................................................................................................................. 2-21
Toolbar Functions ............................................................................................................................ 2-22
Controller Calibration Settings......................................................................................................... 2-22
“BOOM CAL” Monitor Settings ................................................................................................. 2-22
Pump Set Up .................................................................................................................................. 2-23
Setting the Pump Pressure (PWM Pump)................................................................................ 2-23
RCM Set Up .................................................................................................................................... 2-24
PWM Pump Start Up Procedure (Rate Control Module).......................................................... 2-30
Applicator Calibration....................................................................................................................... 2-31
Determine Required Nozzle Size.............................................................................................. 2-31
Overhead Layouts
Legend ...................................................................................................................................... 2-32
40’ Toolbar - 20” Row Spacing For 1800 NutriMax .............................................................. 2-33
44’ Toolbar - 22” Row Spacing For 1800 NutriMax .............................................................. 2-34
40’ Toolbar - 30” Row Spacing For 1800 NutriMax .............................................................. 2-35
40’ Toolbar - Double Coulter 30” Row Spacing For 1800 NutriMax..................................... 2-36
40’ Toolbar - 36” Row Spacing For 1800 NutriMax .............................................................. 2-37
40’ Toolbar - 38” Row Spacing For 1800 NutriMax .............................................................. 2-38
60’ Toolbar - 20” Row Spacing Offset Coulter Post .............................................................. 2-39
60’ Toolbar - 20” Row Spacing Straight Coulter Post ........................................................... 2-40
66’ Toolbar - 22” Row Spacing Offset Coulter Post .............................................................. 2-41
66’ Toolbar - 22” Row Spacing Straight Coulter Post ........................................................... 2-42
60’ Toolbar - 30” Row Spacing Offset Coulter Post .............................................................. 2-43
60’ Toolbar - 30” Row Spacing Straight Coulter Post ........................................................... 2-44
60’ Toolbar - 30” Row Spacing Double Coulter Post............................................................. 2-45
80’ Toolbar - 20” Row Spacing Straight Coulter Post ........................................................... 2-46
80’ Toolbar - 30” Row Spacing Offset Coulter Post .............................................................. 2-47
80’ Toolbar - 30” Row Spacing Straight Coulter Post ........................................................... 2-48
88’ Toolbar - 22” Row Spacing Offset Coulter Post .............................................................. 2-49
88’ Toolbar - 22” Row Spacing Straight Coulter Post ........................................................... 2-50
90’ Toolbar - 30” Row Spacing Offset Coulter Post .............................................................. 2-51
90’ Toolbar - 30” Row Spacing Straight Coulter Post ........................................................... 2-52
FOR INDUCTOR INFORMATION, PLEASE REFER TO YOUR INDUCTOR MANUAL.

1800 & 2600 NutriMax Liquid Applicator — Introduction
6
Table of Contents
Section III
Operation
Preparing Tractor ............................................................................................................................... 3-2
Preparing Applicator .......................................................................................................................... 3-2
Hardware..................................................................................................................................... 3-2
Pivot Pins ................................................................................................................................... 3-2
Hitch ........................................................................................................................................... 3-2
Hydraulic System........................................................................................................................ 3-2
Tires/Wheels................................................................................................................................ 3-3
Lubrication .................................................................................................................................. 3-3
Hitching to the Tractor...................................................................................................................... 3-4
Drawbar Hitching (60’/66’/80’/88’/90’ Toolbars) ........................................................................ 3-4
Drawbar Hitching (1800 - 40’/44’ Toolbars) ............................................................................. 3-5
Transport Chain .......................................................................................................................... 3-6
Hydraulic Connections................................................................................................................. 3-7
Applicator Solution Pump Hydraulics................................................................................... 3-7
Toolbar Hydraulics................................................................................................................ 3-9
Electrical Connection............................................................................................................ 3-9
Steerable Hitch.................................................................................................................................. 3-9
Jack Usage...................................................................................................................................... 3-10
Parked Position (60’/66’/80’/88’/90’ Toolbars) ......................................................................... 3-10
Transport Position (60’/66’/80’/88’/90’ Toolbars)...................................................................... 3-10
Parked Position (1800 - 40’/44’ Toolbars) .............................................................................. 3-11
Transport Position (1800 - 40’/44’ Toolbars)........................................................................... 3-11
Transporting ..................................................................................................................................... 3-12
Drawbar Connection ................................................................................................................. 3-12
Toolbar Operation (60’/66’/80’/88’/90’ Toolbars)............................................................................. 3-13
Unfolding................................................................................................................................... 3-13
Folding ...................................................................................................................................... 3-13
Raising/Lowering in the Field .................................................................................................. 3-14
Wing Fold Stops ................................................................................................................ 3-14
Toolbar Operation (1800 - 40’/44’ Toolbars).................................................................................. 3-15
Unfolding................................................................................................................................... 3-15
Folding ...................................................................................................................................... 3-15
Raising/Lowering in the Field .................................................................................................. 3-16
Depth Stop/Bushings ................................................................................................................ 3-16
Dual Width Toolbar ................................................................................................................... 3-17
Filling Applicator.............................................................................................................................. 3-18
Quick Fill .................................................................................................................................. 3-18
Inductor............................................................................................................................................ 3-19
Basic Operation ........................................................................................................................ 3-19
Tank Mixing .............................................................................................................................. 3-19
Jug and Inductor Tank Rinsing................................................................................................ 3-20
Orifice and Nozzle Installation ........................................................................................................ 3-21
Flow Ball Indicator .......................................................................................................................... 3-22

1800 & 2600 NutriMax Liquid Applicator — Introduction
7
Table of Contents
Section IV
Maintenance
Lubrication (60’/66’/80’/88’/90’ Toolbars)..................................................................................................4-2
Lubrication (1800 - 40’/44’ Toolbars).......................................................................................................4-4
Applicator Maintenance..............................................................................................................................4-5
Seasonal Storage................................................................................................................................4-5
Purging A Hydraulic System...............................................................................................................4-6
Hydraulically Driven Centrifugal Pump ......................................................................................................4-7
Tracks ........................................................................................................................................................4-8
Toolbar & Wing Adjustments .....................................................................................................................4-8
Main Wing & Wing Mast Adjustment.................................................................................................4-9
Stop Bolts....................................................................................................................................4-9
Slider Adjustment ........................................................................................................................4-9
Diverter Valve (60’/66’/80’/88’/90’ Toolbars) ................................................................... 4-10
Diverter Valve (40’ Toolbar / 1800 Model) ..................................................................... 4-10
Center Toolbar & Main Wing Down Pressure...........................................................................4-11
Pivoting Coulter Tube Adjustment.....................................................................................................4-12
Shim Adjustment .......................................................................................................................4-12
Stop Bolt Adjustment ................................................................................................................4-12
Outer Wing Adjustment.....................................................................................................................4-12
Wing Stop & Shim Adjustment.................................................................................................4-12
Outer Wing Down Pressure.......................................................................................................4-13
Sequence Valve Adjustment (40’ Toolbar / 1800 Model) ................................................................4-14
Unfolding to Working Position...................................................................................................4-14
Folding to Transport Position ....................................................................................................4-14
Sequence Valve Adjustment (60’/66’/80’/88’/90’ Toolbars) ..............................................................4-15
Unfolding to Working Position...................................................................................................4-15
Folding to Transport Position ....................................................................................................4-15
Center Toolbar & Wing Mast Cylinder End Replacement (80’/88’/90’ Toolbars).............................4-16
Coulter Hub Adjustment and Replacement ......................................................................................4-19
Coulter Spring Replacement.............................................................................................................4-21
Coulter Post Mount Bracket Adjustment ..........................................................................................4-22
Closer Wheel Adjustment & Replacement (Optional) .......................................................................4-23
Filters (1800 - 40’/44’ Toolbars) ............................................................................................................4-25
Primary Filter....................................................................................................................................4-25
Secondary Filter................................................................................................................................4-26
Filters (60’/66’/80’/88’/90’ Toolbars) .......................................................................................................4-27
Primary Filter....................................................................................................................................4-27
Secondary Filter................................................................................................................................4-28
Winterizing ...............................................................................................................................................4-29
Schematics...............................................................................................................................................4-30
Troubleshooting ........................................................................................................................................4-42
Wheel, Hub and Spindle Disassembly and Assembly.............................................................................4-43
Wheels and Tires.....................................................................................................................................4-45
Wheel Nut Torque Requirements......................................................................................................4-45
Tire Pressure ....................................................................................................................................4-46
Tire Warranty ....................................................................................................................................4-47
Tracks ......................................................................................................................................................4-47
Equalizer Track System ....................................................................................................................4-47
Track Warranty..................................................................................................................................4-47
Complete Torque Chart............................................................................................................................4-48
Hydraulic Fittings - Torque and Installation ...........................................................................................4-49

1800 & 2600 NutriMax Liquid Applicator — Introduction
8
Notes

1800 & 2600 NutriMax Liquid Applicator — Safety
1-1
Section I
Safety
General Hazard Information ............................................................................................................ 1-2
Safety Decals .................................................................................................................................. 1-3
Following Safety Instructions .......................................................................................................... 1-4
Before Operating ............................................................................................................................. 1-5
Before Servicing.............................................................................................................................. 1-6
During Operation ............................................................................................................................. 1-7
Before Transporting ......................................................................................................................... 1-7
During Transport.............................................................................................................................. 1-7
Pressurized Oil ................................................................................................................................ 1-8
Chemical Hazards ........................................................................................................................... 1-9
Clean Water Tank............................................................................................................................ 1-9
Preparing for Emergencies.............................................................................................................. 1-10
Wearing Protective Equipment ........................................................................................................ 1-10

1800 & 2600 NutriMax Liquid Applicator — Safety
1-2
General Hazard Information
No accident-prevention program can be successful without the wholehearted cooperation of
the person who is directly responsible for the operation of the equipment.
A large number of accidents can be prevented only by the operator anticipating the result
before the accident is caused and doing something about it. No power-driven equipment,
whether it be transportation or processing, whether it be on the highway, in the field, or in
the industrial plant, can be safer than the person who is at the controls. If accidents are
to be prevented--and they can be prevented-it will be done by the operators who accept
the full measure of their responsibility.
It is true that the designer, the manufacturer, and the safety engineer can help; and they will
help, but their combined efforts can be wiped out by a single careless act of the operator.
It is said that, “the best kind of a safety device is a careful operator.” We, at Unverferth
Mfg. Co., Inc. ask that you be that kind of operator.
REMEMBER:
THINK SAFETY
A CAREFUL OPERATOR IS THE
BEST INSURANCE AGAINST AN
ACCIDENT!
SIGNAL WORDS
INDICATES AN EXTREMELY HAZARDOUS SITUATION OR ACTION THAT WILL
RESULT IN SERIOUS INJURY OR DEATH.
INDICATES A HAZARDOUS SITUATION OR ACTION THAT COULD RESULT
IN SERIOUS INJURY OR DEATH.
INDICATES AN UNSAFE SITUATION OR ACTION THAT MAY RESULT IN
PERSONAL INJURY.
Is used for instruction on operating, adjusting, or servicing a machine.

1800 & 2600 NutriMax Liquid Applicator — Safety
1-3
Safety Decals
• REPLACE LOST, DAMAGED, PAINTED, OR UNREADABLE DECALS IMMEDIATELY.  IF
PARTS THAT HAVE DECALS ARE REPLACED, ALSO MAKE SURE TO INSTALL NEW
DECALS.THESEDECALSINFORMANDREMINDTHEOPERATORWITHOPERATIONAL
INFORMATION AND SAFETY MESSAGES.
Part No. 95839
Part No. 95445 Part No. 95839
Part No. 9007565
Part No.
TA510514
SMV Emblem
Part No. 97575
Part No. 94094
Part No. 95445
Part No. 9003476
Part No. 901258
Part No. 97961
Part No. 95445
Part No. TA510079
Part No. TA510079
Part No. 95839
Part No. 9003127
Amber Reflector
Part No. 9003126
Red Reflector
Part No. 9003125
Fluorescent Decal
Part No. 901256
Part No. TA510079
Part No.
9007565
Part No. 95839
Part No.
9008714 (20 mph wheels)
9008720 (30 kph wheels)
9008716 (15 mph tracks)
9008722 (25 kph tracks)
Part No.
9008715
(20 mph wheels)
9008721
(30 kph wheels)
9008717
(15 mph tracks)
9008723
(25 kph tracks)

1800 & 2600 NutriMax Liquid Applicator — Safety
1-4
Following Safety Instructions
• Read and understand this operator’s manual before operating.
• All machinery should be operated only by trained and authorized personnel.
• To prevent machine damage, use only attachments and service parts approved by
the manufacturer.
• Always shut tractor engine off and remove key before servicing.
• Avoid personal attire such as loose tting clothing, shoestrings, drawstrings, pants
cuffs, long hair, etc., that may become entangled in moving parts.
• Do not allow anyone to ride on the implement. Make sure everyone is clear before
operating machine or towing vehicle.
• Never attempt to operate implement unless you are in driver’s seat.

1800 & 2600 NutriMax Liquid Applicator — Safety
1-5
Before Operating
• Do not stand between towing vehicle and implement during hitching.
• Always make certain everyone and everything is clear of the machine before beginning
operation.
• Ensure that all applicable safety decals are installed and legible.
• When working around the implement, be careful not to be cut by sharp edges.
• Secure drawbar pin with safety lock and lock tractor drawbar in xed position.
• This applicator is intended to apply only agricultural fertilizers. Attempting to ap-
ply other liquids may cause equipment damage and introduce unexpected personal
hazards.
• When operating applicators on sidehill conditions, it is recommended that the wheel
spacing be set as wide as possible for stability.
• Ensure that the towing vehicle drawbar has sufcient strength to support the draft
and vertical tongue load of a fully-loaded applicator.
• Hitch applicator to towing vehicle and clear all personnel from the surrounding area
before folding and unfolding wings.
• Ensure tank access covers are fully closed before beginning or resuming operation.
• Residual pressure may exist in applicator plumbing even when unit is not in use. Re-
move pressure before servicing any plumbing.

1800 & 2600 NutriMax Liquid Applicator — Safety
1-6
Before Servicing
• Avoid working under an implement; however, if it becomes absolutely unavoidable,
make sure the implement is safely blocked.
• Ensure that all applicable safety decals are installed and legible.
• When working around the implement, be careful not to be cut by sharp edges.
• To prevent personal injury or death, always ensure that there are people who remain
outside the applicator to assist the person working inside, and that all safe workplace
practices are followed. There are restricted mobility and limited exit paths when work-
ing inside the implement.
• Secure drawbar pin with safety lock and lock tractor drawbar in xed position.
• Explosive separation of a tire and rim can cause serious injury or death. Only properly
trained personnel should attempt to service a tire and wheel assembly.
• Add sufcient ballast to tractor to maintain steering and braking control at all times. Do
not exceed tractor’s lift capacity or ballast capacity.
• Check equipment for leaks. Repair any leaks before beginning or resuming operation.

1800 & 2600 NutriMax Liquid Applicator — Safety
1-7
Before Transporting
• Secure transport chain to towing vehicle before transporting. DO NOT transport with-
out chain.
• Check for proper function of all available transport lights. Make sure that all reectors
are clean and in place on machine. Make sure the SMV emblem and SIS decals are
visible to approaching traffic.
• This applicator is not equipped with brakes. Ensure that the towing vehicle has ad-
equate weight and braking capacity to tow this unit.
During Transport
• Comply with all laws governing highway safety when moving machinery.
• Use transport lights as required by all laws to adequately warn operators of other ve-
hicles.
• Use good judgment when transporting equipment on highways. Regulate speed to
road conditions and maintain complete control.
• Maximum on road speed of applicator should never exceed 20 m.p.h. with wheels or
15 m.p.h. with tracks as indicated on the machine. Maximum transport speed of any
combination of implements must not exceed the lowest specied speed of the imple-
ments in combination. Do not exceed 10 m.p.h. during off-highway travel.
• Slow down before making sharp turns to avoid tipping. Drive slowly over rough ground
and side slopes.
• It is probable that this implement is taller, wider and longer than the towing vehicle.
Become aware of and avoid all obstacles and hazards in the travel path of the equip-
ment, such as power lines, ditches, etc.
During Operation
• Comply with all laws and product label directions governing safe product application.
• Regulate speed to eld conditions. Maintain complete control at all times.
• Never service or lubricate equipment when in operation.
• Keep away from overhead power lines. Electrical shock can cause serious injury or
death.
• Use extreme care when operating close to ditches, waterways, fences, or on hillsides.
• Do not leave towing vehicle unattended with engine running.

1800 & 2600 NutriMax Liquid Applicator — Safety
1-8
Pressurized Oil
• Relieve pressure before disconnecting hydraulic lines from tractor, loosening any
hydraulic ttings or servicing hydraulic system. See hydraulic power unit manual for
procedure to relieve pressure.
• High-pressure uids can penetrate the skin and cause serious injury or death. Seek
medical treatment immediately if injured by high-pressure uids. Use cardboard or
wood to detect leaks of hydraulic uid under pressure.
• Hydraulic system must be purged of air before operating to prevent serious injury or
death.
• Do not bend or strike high-pressure lines. Do not install bent or damaged tubes or
hoses.
• Repair all oil leaks. Leaks can cause res, personal injury, and environmental dam-
age.
• Route hoses and lines carefully to prevent premature failure due to kinking and rub-
bing against other parts. Make sure that all clamps, guards and shields are installed
correctly.
• Check hydraulic hoses and tubes carefully. Replace components as necessary if any
of the following conditions are found:
- End fittings damaged, displaced, or leaking.
- Outer covering chafed/cut or wire reinforcing exposed.
- Outer covering ballooning locally.
- Evidence of kinking or crushing of the flexible part of a hose.

1800 & 2600 NutriMax Liquid Applicator — Safety
1-9
Chemical Hazards
• Always wear personal protective equipment when working with or near chemicals.
This equipment includes, but is not limited to: protective eye wear, gloves, shoes,
socks, long-sleeved shirt, and long pants. Additional protection may be required for
many types of chemicals.
• Applicator tanks may contain residual toxic chemicals. DO NOT ENTER APPLICATOR
TANK FOR ANY REASON WITHOUT WEARING PROPER VENTILATION EQUIPMENT.
Failure to do so may result in asphyxiation and death.
• Seek and receive chemical product training prior to using agricultural chemicals.
• Read and understand the entire label of every chemical being applied with this appli-
cator.
• Avoid breathing spray mist or vapor.
• Wash hands before eating, drinking, chewing gum, or using the toilet.
• Remove clothing immediately if chemicals penetrate clothing and contact skin. Wash
thoroughly and put on clean clothing.
• Dispose of unused chemical in accordance with chemical label directions and local/
national regulations.
Clean Water Tank
• A clean water tank is provided as standard equipment. It is equipped with a spigot for
general washing and a hose for emergency eye washing.
• Always keep clean water in tank. Water in clean water tank is not suitable for human
consumption.
• For emergency eyewash, pull hose off of the top fitting and flush affected area.
Clean Water
Tank located
at the rear of
the applicator.

1800 & 2600 NutriMax Liquid Applicator — Safety
1-10
Preparing for Emergencies
• Keep a rst aid kit and properly rated re extinguisher nearby.
• Keep emergency numbers for fire, rescue, and poison control personnel near the
phone.
Wearing Protective Equipment
• Wear clothing and personal protective equipment appropriate for the job.
• Wear steel-toed shoes when operating.
• Wear hearing protection when exposed to loud noises.
• Do not wear additional hearing impairing devices such as radio headphones, etc.

1800 & 2600 NutriMax Liquid Applicator — Set Up
2-1
Section II
Set Up
Pre-Delivery Checklist ................................................................................................................ 2-2
Dealer Set Up............................................................................................................................ 2-3
Closer Wheel Tank Guard Installation (Optional) ..................................................................... 2-11
Tongue Adjustment................................................................................................................... 2-14
Units with Fixed Position Hitch (80’/88’/90’ Units) .......................................................... 2-14
Units Equipped with Steerable Hitch ................................................................................ 2-14
Axle Tread Settings.................................................................................................................. 2-15
Wheel Spacing Combinations ............................................................................................ 2-15
Adjustment......................................................................................................................... 2-16
Tracks Toe In Adjustment.................................................................................................. 2-19
Belt Conditioning...................................................................................................................... 2-21
Toolbar Functions ..................................................................................................................... 2-22
Controller Calibration Settings ................................................................................................. 2-22
“BOOM CAL” Monitor Settings .......................................................................................... 2-22
Pump Set Up ........................................................................................................................... 2-23
Setting the Pump Pressure (PWM Pump)......................................................................... 2-23
RCM Set Up............................................................................................................................. 2-24
PWM Pump Start Up Procedure (Rate Control Module)................................................... 2-30
Applicator Calibration ............................................................................................................... 2-31
Determine Required Nozzle Size....................................................................................... 2-31
Overhead Layouts
Legend............................................................................................................................... 2-32
40’ Toolbar - 20” Row Spacing For 1800 NutriMax....................................................... 2-33
44’ Toolbar - 22” Row Spacing For 1800 NutriMax....................................................... 2-34
40’ Toolbar - 30” Row Spacing For 1800 NutriMax....................................................... 2-35
40’ Toolbar - Double Coulter 30” Row Spacing For 1800 NutriMax.............................. 2-36
40’ Toolbar - 36” Row Spacing For 1800 NutriMax....................................................... 2-37
40’ Toolbar - 38” Row Spacing For 1800 NutriMax....................................................... 2-38
60’ Toolbar - 20” Row Spacing Offset Coulter Post ....................................................... 2-39
60’ Toolbar - 20” Row Spacing Straight Coulter Post .................................................... 2-40
66’ Toolbar - 22” Row Spacing Offset Coulter Post ....................................................... 2-41
66’ Toolbar - 22” Row Spacing Straight Coulter Post .................................................... 2-42
60’ Toolbar - 30” Row Spacing Offset Coulter Post ....................................................... 2-43
60’ Toolbar - 30” Row Spacing Straight Coulter Post .................................................... 2-44
60’ Toolbar - 30” Row Spacing Double Coulter Post ..................................................... 2-45
80’ Toolbar - 20” Row Spacing Straight Coulter Post .................................................... 2-46
80’ Toolbar - 30” Row Spacing Offset Coulter Post ....................................................... 2-47
80’ Toolbar - 30” Row Spacing Straight Coulter Post .................................................... 2-48
88’ Toolbar - 22” Row Spacing Offset Coulter Post ....................................................... 2-49
88’ Toolbar - 22” Row Spacing Straight Coulter Post .................................................... 2-50
90’ Toolbar - 30” Row Spacing Offset Coulter Post ....................................................... 2-51
90’ Toolbar - 30” Row Spacing Straight Coulter Post .................................................... 2-52
FOR INDUCTOR INFORMATION, PLEASE REFER TO YOUR INDUCTOR MANUAL.

1800 & 2600 NutriMax Liquid Applicator — Set Up
2-2
Pre-Delivery Checklist
oFor units equipped with single wheels, ensure wheel offset is outward.
oTorque wheel nuts as as specified in MAINTENANCE section.
oCheck tire pressure as specified in MAINTENANCE section.
oCheck track alignment. Refer to 14” Wide x 80” Long Equalizer®Track manual (411200)
for adjustment and alignment procedure.
oAxles are adjusted from shipping position to desired operating width.
oAll grease fittings have been lubricated.
oCheck to be sure all safety decals are correctly located and legible. Replace if damaged.
oCheck to be sure all reflective decals are correctly located.
oCheck to be sure SMV emblem and SIS decals are in place and shipping film is removed.
oCheck to be sure transport lights are working properly.
oTransport chains are properly installed and hardware is torqued to specification. See
“Transport Chain Connection” in OPERATION section.
oCheck hydraulic components for leaks.
oCheck all plumbing components for leaks.
oPaint all parts scratched during shipment and dealer set up.