Uplift Desk UPLIFT Adapt Freestand User manual

Part E
M6*10 bolts Qty. 2
Part F
bolt covers Qty. 2
Part D
Allen wrench (small)
Part C
Allen wrench (large)
© UPLIFT Desk • 1-800-349-3839 • [email protected] • www.upliftdesk.com
®
UPLIFT Adapt Freestand™Instructions
UDA100~freestand
Step 2
Line up the holes on the plate of the keyboard tray (Part B) with the
holes on the vertical connector under the main assembly’s work sur-
face.
Attach keyboard tray to the main assembly using two M6*10 bolts
(Part E) and tighten using the small Allen wrench (Part D).
Cover the bolts with the adhesive bolt covers (Part F) by placing them,
sticky side down, on the heads of the exposed bolts.
Step 1
Press and hold the release paddle in the up position on the UPLIFT
Adapt main assembly (Part A) to raise the worksurface to the highest
position. Release the paddle to lock in place.
Part B
keyboard tray
Part A
Adapt Freestand
main assembly
45°
Step 3
Lower the unit until the main support column is at a 45° angle. Using
the larger Allen wrench (Part C) and the tension adjustment bolt on
the rear of the unit, adjust the tension for smooth operation. Turn
clockwise to lessen the tension or counterclockwise to increase it.
You may need to make further adjustments once equipment, such
as monitors and keyboards, are placed on the unit.

© UPLIFT Desk • 1-800-349-3839 • [email protected] • www.upliftdesk.com
Step 4
Adjust the height of the unit by squeezing the release paddle and
moving to desired position.
Please note
•
•
•
•
The maximum load capacity of the UPLIFT Adapt Freestand
is 28.6 lbs. Do not overload.
Do not lean on or apply excessive pressure to the keyboard
tray, unit may tip over.
Do not position the keyboard tray to hang over the edge of
your desktop when in the lowest position. The keyboard tray
is designed to rest ON the desktop to prevent tipping.
Failing to follow these safety precautions voids your warranty
and may result in property damage or personal injury.
© Copyright Notice
These instructions are a component of the UPLIFT Adapt Freestand™.
These instructions are part of the scope of delivery, even if the item
is resold.
These instructions are also available on the UPLIFT Desk website:
upliftdesk.com
Excerpts or copies may not be forwarded to third parties
or used in any other published form without the prior written consent
of UPLIFT Desk.
These instructions are subject to United States copyright law.