URBAN OUTFITTERS THREE TIER BOOKSHELF User manual

Assembly Instructions
Page 1 of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
THREE TIER BOOKSHELF
TOOLS REQUIRED BUT NOT INCLUDED:
(a) Screw
[M4x12mm] x5pcs
(b) Screw
[M4x22mm] x12pcs
(f) Screw
[M4x30mm] x1pc
[ø6x30mm] x1pc [ø12xø5mm] x2pcs
PARTS INCLUDED
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
[white] x 1pc
AX1 BX1 CX3 DX2 EX3
Phillips-Head screwdriver
(d) Washer
(c) Anchor (e) Strap

Assembly Instructions
Page 2 of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
THREE TIER BOOKSHELF
STEP 1. With help align the brace (D) with the side frames (A) and (B). Insert screw (a). Tighten with screwdriver
(not included)
STEP 2. Align the bars (C) at the locations shown.

Assembly Instructions
Page 3 of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
THREE TIER BOOKSHELF
STEP 3. Lay in the shelves (E) as shown. Insert screws (b) from the bottom. Tighten with screwdriver. Do not
over-tighten.

Assembly Instructions
Page 4 of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
THREE TIER BOOKSHELF
STEP 4.To prevent injury and property damage from unexpected tipping of furniture.
1. Attached the mounting bracket horizontally to the top back edge of the furniture. Insert the short
screws through the holesin the bracket and tighten securely using screwdriver.Pls contact your
local hardware store toget the correct anchor for your wall type.
2. Detemine where the furniture is to be placed and mark location onthe wall for the other mounting
bracket screw holes. It should be placedapproximately 2" below the bracket mounted to the furniture.
3. Attached the mounting bracket vertically to the wall by inserting the long screwsprovided through
the hole in the bracketandtightening securelyusing screwdriver.Please contact your local hardware
store toget the correct anchor for yourwall type.
4. Place the furniture so the bracket on the back edge are in line with the brackets on the wall.
5. Lace anend of the nylon restraint strap down through each bracket. Bring both ends together and
slide the thin end of the strap through the receiving end of the strap until snug.
6. Check to make sure the strap is securely lacedand locked to the bracket.