INSTALLATION GUIDE:
1. Before installing, please remove all the parts to check if all are in good condition or not.
2. The luminaire is connected to the solar panel against the sunlight. Please make sure the solar
panel is adjusted at the correct angle to receive sunlight.
3. The remote control is designed with an operation distance of 8-15m
4. The lamp comes with two inflated studs as shown in the parts included section.
5. The solar panel angle must be adjusted in the correct direction to receive sunlight.
6. Lamps cannot be installed in low-lying areas, so as not to soak.
7. Plug the male and female plugs tighten the waterproof cap and install it.
8. 6. After installation test the light using the remote control.
MAINTENANCE & WARNING
•Do not use solvents, petrol, etc. Otherwise, the light will be damaged.
•Clean the light with a dry, lint-free cloth.
•Check the solar panel for dirt regularly. If dirt is present remove it to guarantee flawless
function of the product.
•Especially during the winter, keep the product free from snow and ice.
•Confirm installation direction is correct (solar panel should be at the top)
•Confirm no objects are blocking the solar panel from receiving sunlight
•Keep away from the fire.
•Don't immerse in the water
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCT RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA,
PLOVDIV 4000, BUL.L.KARAVELOW 9B