Vari 400664 User manual

Task Chair with Headrest 2 People No Tools Holds up to
Recommended Required 300 lb (136 kg)
1 2 3
x1
x1
x1
x1
Remove chair, air piston, foot ring, and base
from the packaging. With the large end down,
insert the piston through the foot ring (holes
facing down) and into the base. With the piston
rmly in place, slide the foot ring to the desired
posion, and turn the aached knob to the right
to secure in place.
If the piston has a protecve cap on the top,
remove it before proceeding. Line up the hole
underneath the seat with the top of the piston
and base assembly. With another person’s
assistance, carefully lower the chair back onto the
piston. Using even pressure, press down rmly on
the seat cushion a few mes to ensure the seat is
fully engaged with the piston.
Once assembled, do not aempt to disassemble
the chair, as doing so could damage the product.
To aach the headrest, insert the boom of
the headrest into the top of the chair and
press rmly to secure.
WARNING: To prevent injuries and product failure, do not use this chair for standing, climbing, or leaning. Do not use if the chair is damaged or incorrectly assembled.

Adjustment Settings
To angle the arms or slide arms from front to back,
push arms accordingly.
To adjust how easily the backrest reclines, turn the the knob on
the right side forward to increase the tension and backwards to
decrease the tension.
To adjust seat height, use the lever under the right side of
the chair seat.
[phone]
Patent and trademark informaon: vari.com/patents | ©2021 Varidesk, LLC All rights reserved.
To adjust the headrest’s angle, lt back or forward.
To adjust the headrest height, gently pull up to raise
and push down to lower.
To adjust arm height, use the buon under the armrest and
pull up or push down.
To allow the backrest to recline, turn the knob on the le
side to the unlocked posion. To prevent the backrest from
reclining, turn the knob to the locked posion.
To adjust posion of cushioned seat, use the lever on the
le and pull the seat forward or push it back.