Vari 43285 User manual

Performance Task Chair
Place the piston into the chair base with the smaller side pointed up.
1
2
x1
SEAT BACK
x1
SEAT
x1
PISTON
x1
CHAIR BASE
x5
M8x30mm BOLTS
x1
ALLEN KEY
Patent and trademark informaon: vari.com/patents |
©2021 Varidesk, LLC All rights reserved.
WARNING: To prevent injuries and product failure, do not use this chair for standing, climbing, or leaning. Do not use if the chair
is damaged or incorrectly assembled.
[phone]
2 People
Recommended
Holds up to
275 lb (125 kg)
Place the seat onto a table, and then line up the holes to connect the seat back to the seat. Then, insert the
bolts into the highlighted holes above, and use the Allen key to ghten them into place.

3
With assistance, take the assembled seat,
and place the highlighted secon of the
mechanism onto the highlighted secon
of the piston.
Performance Task Chair Adjustments
4D Arm Adjustments
To adjust the seat height, li the back lever under
the right side of the chair seat.
To move the seat base forward or
backward, li the front lever under
the right side of the chair seat.
To lock the seat in an upright
or reclined posion, use the
lever under the le side of the
chair seat.
To adjust the front-to-back
posion of the armrest, gently
grab the center of the armrest,
and slide forward or backward
into the desired posion.
To adjust the arm height, press
and hold the buon on the out-
side of the arms. Li or lower
the arms, and release the buon
once at the desired height.
To adjust the side-to-side
posion of the armrest, gently
grab the center of the armrest,
and slide inward or outward into
the desired posion.
To adjust the angle of the
armrest, gently grab the front
or back of the armrest, and
twist laterally into the desired
posion.