Vari 401529 User manual

Insert the ve casters into the chair base unl they snap
into place. Once aached, ip the base over.
1 2
Place the piston into the center of the base with the
smaller side pointed up. NOTE: Remove the orange
protecve cap from the piston before inserng it
into the base.
x1
CHAIR BACK
x1
SEAT PAN
x1
RIGHT ARM
x5
CASTERS
x1
LEFT ARM
x1
PISTON
x1
CHAIR BASE
With the seat pan upside down, align the arm mounng holes with the holes on the seat pan. Nong the L and R marks
on the seat pan and arms, ensure the chair arms are on the correct sides; the longer underside of the chair arm should
be poinng toward the front of the seat pan (marked with an arrow). Bolng the arms on, using the six (6) M6 x 40mm
screws and Allen key to secure them.
3
x1
ALLEN KEY
x6
M6 x 40MM
BUTTON HEAD
HEX DRIVE SCREW
x3
M8 x 16MM
BUTTON HEAD
HEX DRIVE SCREW
Essential Task Chair 2 People
Recommended
Holds up to
275 lb (125 kg)

Slide the chair back onto the seat pan and align mounng holes. Use the three (3) M8 x 16mm
screws and Allen key to secure the chair back.
4 5
Lastly, take the assembled chair seat and place it on the piston that is aached to the base.
CAUTION: Once assembled, do not aempt to disassemble the chair, as doing so could
damage the product.
Patent and trademark informaon: vari.com/patents |
©2021 Varidesk, LLC All rights reserved.
[phone]
WARNING: To prevent injuries and product failure, do not use this chair for standing, climbing, or leaning. Do not use if the chair is damaged or incorrectly assembled.

To adjust how easily the backrest reclines, turn the knob clockwise to
increase tension and counter clockwise to decrease tension.
To adjust lumbar support, push the support up or down accordingly.
To move the seat cushion forward or backward, use the front lever on
the right side of the chair.
To adjust arm height, press and hold buon on the outside of the arms.
Li or lower the arms and release the buon once at the desired height.
To adjust seat height, use the rear lever under the right side of the chair seat.
This lever can also be pushed in to lock the backrest’s angle or pulled out to
allow the backrest to recline.
Essential Task Chair Adjustments