Vari Task Chair User manual

Patent and trademark informaon: vari.com/patents | ©2021 Varidesk, LLC All rights reserved.
Task Chair

Task Chair Assembly
x1
CHAIR BACK
Holdsupto
300lb(136kg)
2People
Recommended
CHAIR SEAT
Holdsupto
300lb(136kg)
2People
Recommended
ALLEN KEY
Holdsupto
300lb(136kg)
2People
Recommended
AIR PISTON
Holdsupto
300lb(136kg)
2People
Recommended
BASE
Holdsupto
300lb(136kg)
2People
Recommended
HEX BOLT
Holdsupto
300lb(136kg)
2People
Recommended
x1
x1
x4
x1
x1
2 People
Recommended
Holdsupto
300lb(136kg)
2People
Recommended
Holds up to
300 lb (136 kg)
Holdsupto
300lb(136kg)
2People
Recommended

1
Remove the chair back, chair seat, hex bolts, Allen key, air piston, and base from the box.
Align the back of the chair with the steel plate aached to the seat. Using the four bolts
provided, fasten the plate to the back of the chair with the provided Allen key.

2
Insert the piston into the base in the orientaon shown with the large end down.

If the piston has a protecve cap on the top, remove it before proceeding. Line up the hole
underneath the seat with the top of the piston and base assembly. With another person’s
assistance, carefully lower the chair back onto the piston. Using even pressure, press down
rmly on the seat cushion a few mes to ensure the seat is fully engaged with the piston.
CAUTION: Once the chair is assembled, do not aempt to disassemble the chair, as doing
so could damage the product.
3

Task Chair Adjustments
To angle the arms or slide arms from front to back,
push arms accordingly.
To adjust how easily the backrest reclines,
turn the knob on the right side forward
to increase the tension or backward to
decrease the tension.
To adjust seat height, use the lever under the right side of the chair seat.

To adjust the posion of the cushion seat, use the lever on
the le and pull the seat forward or push it back.
To allow the backrest to recline, turn the knob on
the le side to the unlocked posion. To prevent
the backrest from reclining, turn the knob to the
locked posion.
To adjust the arm height, press the buon under
the armrest and pull up or push down on the
armrest.

[phone]
WARNING: To prevent injuries and product failure, do not use this chair for standing,
climbing, or leaning. Do not use if the chair is damaged or incorrectly assembled.