Vari 401177 User manual

Flip Top Training Table 5'
Following the “L” (le) and “R” (right) indicators on the feet and the interior side of the legs, insert the feet into the corresponding legs of the
table. Using a Phillips screwdriver and the included screws, secure both feet in posion. If you purchased a modesty panel, please refer to the
separate instrucons included with the modesty panel before moving on to the next step.
1
2
NOTE: To protect your new table, complete this step while it is sll face down in the box. Using two hands, pull the locking mechanism out
toward the edge of the table and hold in place. Rotate the legs 90 degrees unl upright, then release the leg locking mechanism.
x1
TABLE TOP
WITH LEGS
PHILLIPS HEAD SCREWDRIVER
REQUIRED TOOLS (Not Included)
2 People
Required
Holds up to
125 lb (56.7 kg)
x1
RIGHT FOOT
x1
LEFT FOOT
x2 b
CASTERS
WITHOUT LOCK
x2 a
CASTERS
WITH LOCK
x4
M5 X 28L PHILLIPS HEAD SCREW

Linking Multiple Tables Together
To insert the casters, rst line up the casters that have a lock (a) with the longest feet closest to the locking
mechanism and press down unl the caster is at against the foot. Then, line up the casters that do not have
a lock (b) with the shortest feet and again press down unl the caster is at against the foot.
a
b
a
b
a
b
Storing Tables
With two hands, pull and hold the locking
mechanism out toward the table edge, then lt
the table top into the upright posion. Once it is
in place, release the locking mechanism.
a
b
a
b
a
b
Nesting Tables
When the Flip Top Training Table is in the upright posion,
mulple tables can be nested together for storage. Posion
the tables to face the same direcon, align each end, and
push them together, carefully guiding the legs of the back
table between the legs of the front table.
a
b
a
b
a
b
Patent and trademark informaon: vari.com/patents | ©2021 Varidesk, LLC All rights reserved.
[phone]
a
b
a
b
a
b
3 4
Note: Before ipping the table, lock the two locking casters. With one person on
each end of the table, li and rotate the table so that the front edge and wheels are
resng on the ground. Li and rotate the table again, gently seng all four wheels
on the ground.
a
b
a
b
a
b
To link mulple tables together, line them up side-by-side facing the same direcon.
Once in place, rotate the latch hook on the underside of one table through the latch
on the underside of the second table.
a
b
a
b
a
b