Floor model: Place the bowl in the bowl trolley. Put the de-
sired tool into the bowl and wheel it into position between
the bowl arms. Ensure that the bowl is correctly engaged
with the bowl arms; see “
.
Table model: Put the desired tool into the bowl and place
the bowl in the bowl arms.
-
sible when the machine is running.
must be used if it is necessary to add hot ingredients during
oC).
Lift the bowl with the aid of the lifting handle.
The mixer is now ready to start.
It is possible to set both the running time and speed before
starting the machine; see next section:
Press to start the mixer.
Press next to to increase the speed.
Press next to to reduce the speed.
The speed is shown as a number on the scale
.
The display represents the lowest speed,
The display represents the highest speed,
then start the mixer by pressing .
Select a running time for the mixer by pressing next to
. The running time is shown in minutes and seconds in
and .
When the mixer is running, the running time will not be reset
if is pressed once; press once more and it will be
reset.
If no running time is selected, the display will show the time
elapsed since the mixer was started.
If the time set on the timer runs out while the mixer is run-
ning, the mixer stops and you hear a bib.
-
ing the running time, press . The mixer will slow down
and then stop and the running time will stop too.
The bowl can now be lowered and the ingredients checked.
Lift the bowl and press , and the mixer will start and the
running time will resume.
To stop the machine:
• Press . Running time not reset.
• Press twice. Running time reset.
• Press the emergency stop - the running time will be
reset.
• ‘Tilt’ the safety guard - the running time will be reset.
• Lower the bowl - the running time will be reset.
In all cases the mixer can be restarted by pressing .
It will start at the lowest speed.
