Vermeiren Carpo 4 deluxe User manual

VERMEIREN
Carpo 4 deluxe
I N S T R U C T I O N M A N U A L

Instructions to the specialist dealer
This instruction manual is part and parcel of the product and must accompany every product sold.
Version: A, April 2012
All rights reserved, including translation.
No part of this manual may be reproduced in any form what so ever (print, photocopy, microfilm or any other process) without
written permission of the publisher, or processed, duplicated or distributed by using electronic systems.
© N.V. Vermeiren N.V. 2012

Carpo 4 Deluxe
2012-04
Page 1
Contents
1 Productdescription................................................................................................. 3
1.1 Intended Use............................................................................................................... 3
1.2 Safety instructions ...................................................................................................... 4
1.3 Technical specifications.............................................................................................. 5
1.4 Components................................................................................................................ 6
1.5 Accessories................................................................................................................. 7
1.6 Location identification plate....................................................................................... 7
1.7 Explanation of symbols .............................................................................................. 7
2 Use .............................................................................................................................. 8
2.1 Remarks on electromagnetic compatibility (EMC).................................................... 8
2.2 Carrying the scooter.................................................................................................... 9
2.3 Assembly and disassembly of the scooter.................................................................. 9
2.4 Operating the brakes................................................................................................. 10
2.5 Transfer in and out the scooter ................................................................................. 10
2.6 Correct position in the scooter...................................................................................11
2.7 Driving the scooter ....................................................................................................11
2.8 Driving the scooter on ramps.................................................................................... 14
2.9 Driving the scooter over steps.................................................................................. 14
2.10 Operator control........................................................................................................ 14
2.11 Neutral...................................................................................................................... 15
2.12 Transport in the car................................................................................................... 16
2.13 Automatic Power shut down..................................................................................... 16
2.14 Charging the batteries............................................................................................... 17
3 Installation and adjustment................................................................................ 18
3.1 Tools ......................................................................................................................... 18
3.2 Manner of delivery ................................................................................................... 18
3.3 Adjusting the steering unit........................................................................................ 19
3.4 Adjusting the seat ..................................................................................................... 19
3.5 Adjusting the back.................................................................................................... 20
3.6 Adjusting the armrests.............................................................................................. 21
3.7 Tyre changing ........................................................................................................... 21
3.8 Thermal fuses ........................................................................................................... 22
3.9 Tip protectors............................................................................................................ 22
3.10 Changing the battery................................................................................................. 23
4 Maintenance ........................................................................................................... 23
4.1 Regular Maintenance................................................................................................ 23
4.2 Shipping and storage ................................................................................................ 24
4.3 Care........................................................................................................................... 24
4.4 Inspection.................................................................................................................. 26
4.5 Troubleshooting........................................................................................................ 27
4.6 Troubleshooting Fault codes..................................................................................... 27
4.7 Disinfection .............................................................................................................. 28
5 Warranty................................................................................................................... 30
6 Disposal................................................................................................................... 30
7 Declaration of conformity................................................................................... 30
8 Maintenance plan.................................................................................................. 31
9 Disinfection book.................................................................................................. 31

Carpo 4 Deluxe
2012-04
Page 2
Preface
First of all we want to thank you for putting your trust in us by selecting one of our scooters.
The expected lifetime of your scooter is strongly influenced by the care and maintenance of
the scooter.
This manual will help you get acquainted with the operation of your scooter.
Following the user instructions and the maintenance instructions are an essential part of the
warranty.
This manual reflects the latest product developments. Vermeiren has the right to introduce
changes without the obligation to adapt or replace previously delivered models.
For any further questions, please consult your specialist dealer.

Carpo 4 Deluxe
2012-04
Page 3
1 Productdescription
1.1 Intended Use
The scooter is intended to comfortably transport people. This scooter is designed to transport 1
person. Do not carry passengers on your scooter (including children).
The scooter is designed to transport adult people only, no goods, nor any persons under the age of
16.
Neither should it be used by people obviously suffering from physical or mental limitations that render
them incapable of safely handling the scooter in traffic.
These limitations could involve:
•hemiplegics or paraplegics
•loss of limbs (arm amputation)
•limb defects or deformations (if resulting in reduced equilibrium and steering abilities)
•contractures or damaged joints (if resulting in reduced equilibrium and steering abilities)
•balance disturbances
•cachexia (decrease in muscle)
•mental disorders
•damage to the cerebral cortex owing to psychological disorders
•visual impairment
The scooter is classified as class B.
The scooter is suited for indoor and outdoor use by the occupant.
When providing for individual requirements:
•body size and weight (max. 150 kg)
•physical and psychological condition
•residential circumstances
•environment
should be taken into consideration.
Your scooter should be used on flat surfaces where all four wheels are touching the ground and where
there is sufficient contact to propel the wheels equally.
You should practice for use on uneven surfaces (cobblestones, etc.), slopes, curves and to get past
obstacles (curbs, etc.).
The scooter should not be used as a ladder, nor is it a transport for heavy or hot objects.
When using your Scooters on streets or footpaths, local laws and regulations apply.
The electric scooter can be used on sidewalks, urban road. Under no circumstances the scooter may
be used for driving on larger roads or expressways.
Use only Vermeiren approved accessories.
The manufacturer is not liable for damage caused by the lack of or improper service or as a result of
not following instructions from this manual.
Compliance with the user and maintenance instructions are an essential part of the warranty
conditions so we recommend that you read the following pages very carefully.
Visually impaired people can contact the dealer for the instructions for use.

Carpo 4 Deluxe
2012-04
Page 4
1.2 Safety instructions
LUse only Vermeiren approved accessories.
LBefore getting on or off, taking apart or transporting your scooter, turn the start key to the “off”
position.
LWhen transporting the scooter, no persons may be transferred along with it.
LTest the effects on the handling of the scooter when its center of gravity is shifted, for example
on up or down gradients, on laterally sloping ground or when driving over uneven terrain.
LDo not drive on roads with heavy traffic or roads that are muddy, gravelly, bumpy, narrow,
snowed over, icy or canal towpaths not guarded by any fence or hedge.
LKeep away from places where you might get the wheels stuck.
LPay attention that your clothes do not tangle in the wheels.
LWhen picking up objects lying in front of, next to, or behind the scooter, take care that you do
not lean too far sideways: risk of tipping over.
LAvoid putting your scooter into the free-wheeling position on slopes.
LNever reverse uphill.
LReduce speed when you go round corners.
LDo not take the scooter onto escalators.
LWhile driving, hold the handle bars with both hands.
LPut your legs and feet on the surfaces provided for them during the drive.
LDo not use your scooter in snowing, misty or heavy windy conditions.
L When storing or parking your scooter outside, protect it with a shrouding cover against
humidity.
L High levels of humidity or very cold conditions can reduce the performance of your scooter.
LUse your scooter strictly in accordance with regulations. Avoid driving straight over obstacles
(e.g. step, edge of the curb) or down from high ledges.
LObey traffic regulations when driving on public roads. Please take other road-users into
consideration.
LAs is the case with any other vehicle, you must never be under the influence of alcohol or
medicine while driving your scooter. This also applies to indoor driving.
LWhen traveling outdoors, adapt your driving to weather and traffic conditions.
LWhen driving in the dark, wear bright clothing or clothing with reflectors to be more visible, and
make sure that the reflectors on the scooter are clearly visible and drive with lighting on.
LMake sure that the lights of your scooter are free from dirt and/or other objects that could hide
them.
L Never use your scooter as a seat in an automobile or other vehicle.
LCheck that the profile depth of the tyres is adequate.
LMake sure that the maximum load is not exceeded.
LIf your scooter has pneumatic tyres, be careful to inflate them to the correct pressure (see
pressure indication on the tyres) for optimal steering and stability of the scooter.

Carpo 4 Deluxe
2012-04
Page 5
1.3 Technical specifications
Technical terms below are valid for the scooter in standard settings and optimum environmental
conditions. If other accessories are used, the tabulated values will change. Changes in outdoor
temperatures, humidity, uphills, downhills, soils and battery levels can reduce output.
Brand
Vermeiren
Address
Vermeirenplein 1/15, B
-
2920 Kalmthout
Type
Rear wheel
drive
s
cooters, Class
B
Model
C
arpo
4
Deluxe
Maximum occupant mass
15
0
kg
Description
Minimum dimensions
Maximum dimensions
Max. speed 15 km/h
Continuous driving distance range* 40 km (with 75Ah batteries)
Length 1600 mm
Width 730 mm
Height 1350 mm
Folded / dismantled length Not foldable
Folded / dismantled width Not foldable
Folded / dismantled height 735 mm (seat removed; steering unit folded)
Total mass 140 kg
Mass of heaviest part (that can be
dismantled or removed) 115 kg (without seat) or 100,5 kg (without seat and batteries)
Masses of parts that can be
dismantled or removed.
Seat:
25 kg;
Batteries
:
14,50 kg
Static stability downhill < 10°
Static stability uphill < 10°
Static stability sideways < 10°
Dynamic stability 6°
Maximum safe slope 6°
Obstacle climbing 100 mm
Seat plane angle 6,6°
Effective seat depth 440 mm
Seat surface height at front edge 480 mm
Backrest angle 16°
Backrest height 550 mm
Distance between armrest and seat
210 mm
Front location of armrest structure 270 mm
Motor Nom. 950 Watt, electromagnetic brakes
Batteries Valve regulated lead-acid 75 Ah
Nominal voltage (battery) 2 x 12V
Degree of protection IPX4
Battery charger 8 Amp (external)
Battery charger protection class IP21
Battery charger insulation class II
Minimum turning diameter 2080 mm
Reversing width 2400 mm

Carpo 4 Deluxe
2012-04
Page 6
Brand
Vermeiren
Address
Vermeirenplein 1/15, B
-
2920 Kalmthout
Type
Rear wheel
drive
s
cooters, Class
B
Model
C
arpo
4
Deluxe
Maximum occupant mass
15
0
kg
Description
Minimum dimensions
Maximum dimensions
Diameter Rear wheels (number) 100 x 50 mm-10 air (2)
Tyre pressure, rear (driving) wheels
Max. 2,75 bar
Diameter steering wheels (number) 100 x 55 mm-10 air (2)
Tyre pressure, steering wheels Max. 2,75 bar
Handle bar Speed control lever
Lights Serial
Indicator light Serial
Mirror Optional
Storage and use temperature +5 °C to +41 °C
Operating temperature of the
electronics -10°C to +40°C
Storage and use humidity 30%
We reserve the right to introduce technical changes. Meas
urement tolerance
±
15 mm / 1,5 kg / °
.
* The theoretical driving distance will be reduced if the scooter is used frequently on slopes, rough
ground or to climp curbs. Maximum driving distance is based on an ambient temperature of 20°C, a 100
kg driver and a brand new fully recharged battery by a constant driving speed at 12,8 km/h with 70%
battery power discharged.
Table 1: Technical specifications
1.4 Components
* Ceres 3:
2
1
3
4
5
8
9
7
11
12
13
14
15
6
10
16
17
1 = Headrest
2 = Backrest
3 = Armrest
4 = Seat
5 = Lever seat rotation
6 = Rear light
7 = Rear frame
8 = Rear wheels
9 = Side reflectors
10= Footplate
11= Front wheel
12= Head light
13= Front indicator lights
14= Manual brake lever
15= Rearview mirror
16= Speed lever
17= Lever angle adjustment
steering unit

Carpo 4 Deluxe
2012-04
Page 7
1.5 Accessories
The following accessories are available for the scooters Carpo 4 Deluxe:
•LWARNING: Risk of injury - Be sure that crutches are attached very well and
can not fall on the user.
Crutch holder
•LWARNING: Risk of injury - Be sure that the rollator is attached very well on
the rollator holder.
Rollator holder
•Rearview mirror
•LWARNING: Risk of injury - Only use the seat belt as a seat positioning
device.
Pelvic safety belt
1.6 Location identification plate
The location of the identification plate is under the battery cover, just below the seat.
1.7 Explanation of symbols
Maximum mass
Minimum slope
Maximum speed
Indoor and outdoor use
Not crash-tested
Indoor use (Only for battery charger)
Separate recovery and recycling of electric and electronic devices (Only for Battery
charger)
Type designation
Identification
plate

Carpo 4 Deluxe
2012-04
Page 8
2 Use
This chapter describes the everyday use. These instructions are for the user and the specialist
dealer.
The scooter is delivered fully assembled by your specialist dealer. The instructions intended for the
specialist dealer on how to set up the scooter are given in § 3.
2.1 Remarks on electromagnetic compatibility (EMC)
Your scooter has been tested according EN 12184: 2009 section 9, IEC 61000-4-2: 2008, IEC 61000-
4-3: 2010, IEC 61000-4-8: 2009 for EMC-compliance.
We wish to point out that sources of electromagnetic waves (e.g. cell phones) are liable to create
interferences. The electronics of the scooter itself could affect other electric appliances too.
To reduce the effect of electromagnetic sources of interference, please read the following warnings:
LWARNING: The scooter might disturb the operation of devices in its environment that
emit electromagnetic field.
LWARNING: The driving performance of the scooter can be influenced by
electromagnetic fields (e.g. electricity generators or high power sources).
LWARNING: Avoid using any portable TV or radio in the immediate environment of your
scooter for as long as it is turned on.
LWARNING: Avoid using any transmitter-receiver or cell phones in the immediate
environment of your scooter for as long as it is turned on.
LWARNING: Check the area for transmitter masts and avoid using the scooter close to
them.
LWARNING: If involuntary movements or braking occur, turn off the scooter as soon as it
is safe to do so.
Interfering electromagnetic fields may have a negative effect on the scooter’s electronic systems.
These can include:
•Disengagement of the engine brake
•Uncontrollable behavior by the scooter
•Unintentional steering movements
In the presence of very strong or enduring interfering fields, the electronic systems could even break
down entirely or suffer permanent damage.
Possible sources of radiation include:
•Portable receiver and transmitter installations (receiver and transmitter with fixed antenna
mounted directly on the transmitting unit)
- Transmitting and receiving sets
- Cell phones or "walkie talkie"
- portable TV, radio and navigation devices
- other personal transmitting devices
•Mobile medium-range transmitting and receiving devices (e.g. car antennas, with the antenna
mounted on the outside of the vehicle)
- Fixed transmitting and receiving sets
- Fixed mobile transmitting and receiving devices
- Fixed radio, TV and navigation systems
•Long-range transmitting and receiving devices
- Radio and television towers
- Amateur radio sets

Carpo 4 Deluxe
2012-04
Page 9
Other home devices like CD player, notebook, cordless phones, AM/FM radios, electric shavers and
hair dryers, so far as we know, will have no influence provided that they function perfectly and their
cabling be in an excellent condition. Please conform to the operating instructions accompanying such
electric instruments to ensure trouble free operating of your scooter.
1. Do not operate hand-held (transceivers-receivers), such as citizens band (CB) radios, or turn ON
personal communication devices, such as cellular phones, while the powered vehicle is turned ON;
2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to
them;
3. If unintended movement or brake release occurs, turn the powered vehicle OFF as soon as it is
safe;
4. Be aware that adding accessories or components, or modifying the powered vehicle, may make it
more susceptible to EMI (Note: There is no easy way to evaluated their effect on the overall
immunity of the powered vehicle);
The intensity of the interfering EM energy can be measured in volts per meter (V/m). Each powered
vehicle can resist EMI up to a certain intensity. This is called its “immunity level”. The higher the
immunity level, the greater the protection. At this time, current technology is capable of achieving at
least a 20 V/m immunity level, which would provide useful protection from the more common sources
of radiated EMI. This powered vehicle model as shipped, with no further modification, has an
immunity level of 20 V/m without any accessories.
2.2 Carrying the scooter
The weight of the frame and steering unit is 115 kg. This is very heavy to carry.
The best way to carry the scooter is to make use of neutral mode of the scooter. Place the scooter in
neutral and roll the scooter to the desired place.
If this is not possible you can carry the scooter by following steps:
1. Switch the scooter off.
2. Remove loose parts (seat and batteries)
3. Store loose parts in a safe place.
4. Carry the frame + steering unit with 2 or 3 persons to the desired place. Take the frame on the
chassis, and not by the bumpers. Only on the fixed parts from the frame.
2.3 Assembly and disassembly of the scooter
LWARNING: Risk of injury - Make sure that all movable parts are assembled properly.
LWARNING: Risk of injury - Be careful not to cut or bruise yourself with the cables.
LWARNING: Risk of injury - Turn the scooter off before disassembly.
LCAUTION: Risk of pinching - Do not place fingers between the components of the
scooter.

Carpo 4 Deluxe
2012-04
Page 10
To disassemble, please proceed as follows:
•Switch the scooter off.
•Remove the seat (see “Adjusting the seat” chapter).
•Lift off the rear plastic cover of the batteries.
•Loosen the straps used to fasten the
batteries in place.
•Unplug all battery plugs (not the pole
connectors) and all cable plug- and socket
connections.
•Lift the batteries out.
•Fold the steering unit down.
To reassemble, please proceed as follows:
•Move the steering unit upwards.
•Put the batteries back in and connect to
the battery plugs (plugs of the same color
go together).
•Use the straps to tighten the batteries in
such a way that they will not move, even
during drives.
•Mount the rear plastic cover.
•Mount the seat (see "Adjusting the seat"
chapter).
2.4 Operating the brakes
To apply the electromagnetic brakes:
1. Let go of the speed or drive lever, the electromagnetic brake in the motor will be activated, the
scooter will stop.
To apply the manual brakes:
1. Pull the brake lever towards the control
panel.
2. Release the brake lever .
The manual brake tightness can be adjusted by the
brake cable adjuster .
2.5 Transfer in and out the scooter
1. Park the scooter as close as possible to the place where you
want to transfer.
2. Check that the control panel is switched off.
3. Put the arm support on the side you want to transfer upwards.
4. Transfer to / from the scooter.
1
2

Carpo 4 Deluxe
2012-04
Page 11
2.6 Correct position in the scooter
Some recommendations for a comfortable use of the scooter:
1. Position your backside as close as possible to the back rest.
2. Make sure your upper legs are horizontal.
2.7 Driving the scooter
L
LL
L WARNING: Risk of burns – Be careful when driving in hot or cold environments
(sunshine, extreme cold, saunas, etc.) for a sufficient amount of time and when
touching - Surfaces can assume the environment temperatures.
L
LL
L WARNING: Risk of unsafe settings - Use only the driving characteristics described in
this manual.
2.7.1 Preparing the scooter for use
When you use your scooter for the first time, make sure that it is standing on level ground. All wheels
must be in contact with the ground.
1. For first time use, fully recharge the batteries.
2. Make sure that the motor is engaged.
3. Set the steering unit in the most comfortable position for yourself and make sure it has been
secured properly.
4. See that the seat has been locked in the driving position.
5. Sit down on the seat and verify that both armrests are folded down so you can rest your arms
on them.
6. Insert contact key and turn to the right. If necessary, turn on the headlights.
7. Check the battery indicator and see that there is enough power for your trip. If not enough
capacity recharge the batteries before departure.
Now put the speed control on the operator control to the minimum position. Your scooter is now ready
for use. Only use higher speed setting when you are confident that you can easily operate and control
your scooter.
Before using the scooter in busy or potentially dangerous areas, familiarize yourself with the operation
of your scooter. Please practice in a wide and open area like a park.
2.7.2 Handling after usage
Before getting off from your scooter, make sure that all four wheels touch the ground simultaneously.
Next turn the key to the “OFF” (charge indicator goes out) to turn off the integrated light.
2.7.3 Parking the scooter
Once your scooter has been turned off, no command can be sent to the driving system. You will be
unable to deactivate the electromagnetic brakes before turning on your scooter again. Always park
your scooter on sites that are well guarded or clearly visible.
2.7.4 Your first trip
L
LL
L WARNING: Control your scooter - Accustom yourself with the driving behavior of your
scooter.
L
LL
L WARNING: Control your scooter - Do not use both sides of the speed lever
simultaneously. This might leave you unable to control your scooter.
L
LL
L WARNING: Control your scooter, risk of injury - Do not adjust the speed while you are
driving.
L
LL
L WARNING: Risk of injury - Be sure no people or objects are behind you while reversing
the scooter.

Carpo 4 Deluxe
2012-04
Page 12
•Driving
Once you are seated on your scooter and have started it as described above, take hold of the speed
lever with both hands, put your thumbs to push the speed lever in the required direction, i.e.:
PUSH ACTION BY THE RIGHT HAND = FORWARD MOVEMENT
PUSH ACTION BY THE LEFT HAND = BACKWARD MOVEMENT
While using your scooter indoor, do not put your scooter in the highest speed.
•Driving on the pavement
Ensure the 12,8 km/h limit switch is set to the slowest setting when using the scooter on the
pavement. This will limit your scooter to a maximum speed of 12,8 km/h. It is not allowed to travel at
more than 12,8 km/h on the pavement.
The limit switch can be set to the fastest setting for use on the road or on private ground.
•Braking
To brake, let go of the speed/drive lever, which will let it return to the zero position and slow down your
scooter to a gentle stop. Practice pulling away and braking to get accustomed to the scooter. You
need to be able to estimate how your scooter will react when you drive or brake.
Do not turn your scooter "OFF" while driving as this will lead to an emergency stop and possible risk of
accident and injury.
•Driving in corners and bends
L
LL
L WARNING: Risk of tipping over - Reduce your speed before you enter a curve or
corner.
L
LL
L WARNING: Risk of clamping - Always maintain an adequate distance from corners and
obstacles.
L
LL
L WARNING: Risk of tipping over - Do not drive your vehicle in an "S" pattern or make
erratic turnings.
For corners and bends, use both hands to turn the handle bar in the direction you wish to take. The
front wheels will turn accordingly and steer the scooter into a new direction. It is very important that
you ensure that there is enough space allowing you to go around bends and corners. Narrow
passages must preferably be approached in a large curve so as to allow you to enter the narrowest
part as straight from the front as possible. Bear in mind that your scooter’s back part will in most cases
be wider than the front part.
Take care not to enter curves and corners diagonally. By ‘cutting the corner’, chances are that your
rear wheels will run into obstacles and destabilize your scooter.
2.7.5 Backward movement
L
LL
L WARNING: Control your scooter - Accustom yourself with the driving behavior of your
scooter.
L
LL
L WARNING: Control your speed - Always go backward in the lowest speed possible.
L
LL
L WARNING: Risk of collision - Always look to the back when you go backward.
Rearward driving requires increased concentration and care (LEFT HAND ACTION). This explains
why we have greatly reduced the speed of rearward movement in comparison with forward driving.
But we still recommend that you put the speed lever on minimum when you drive backward.
Do not forget that the steering direction with rearward driving is the opposite of when you go forward,
and that your scooter will turn directly in the required direction.
When you are driving backwards the scooter makes a sound.

Carpo 4 Deluxe
2012-04
Page 13
2.7.6 Going uphill
L
LL
L WARNING: Control your scooter - Accustom yourself with the driving behavior of your
scooter.
L
LL
L WARNING: Control your scooter - Never put your scooter in neutral on slopes.
L
LL
L WARNING: Control your speed - Moving on slopes as slow as possible.
L
LL
L WARNING: Risk of tipping over - Do not exceed the maximum gradient of static
stability uphill (see paragraph "Technical specifications").
L
LL
L WARNING: Never reverse going uphill.
Always approach slopes directly from the front and, to avoid tipping over, see that all four wheels stay
in contact with the ground at all times (ramps, driveways, etc.). Always lean forward when climbing a
steep gradient. Your scooter is powered through a differential. Both drive wheels should therefore stay
in contact with the ground at all times. Should one of the drive wheels no longer be in contact with the
ground, a safety device will cut the transmission of energy to the wheels, bringing the scooter to a halt.
If you come to a stop on a slope by letting go of the accelerator, the engine break will prevent your
scooter from rolling backward. As soon as the accelerator returns to zero position, the engine break is
activated.
To resume your uphill drive, push the accelerator throttle open fully to ensure the release of a
sufficient amount of power. This will allow your scooter to slowly ascend the slope.
If your scooter is unable to drive up, turn the speed control up and try again.
When driving on a gradient, the battery indicator light might move up and down. This is a normal
phenomenon so please do not worry.
2.7.7 Going downhill
L
LL
L WARNING: Control your scooter - Accustom yourself with the driving behavior of your
scooter.
L
LL
L WARNING: Control your scooter - Never put your scooter in neutral on slopes.
L
LL
L WARNING: Control your speed - Moving on slopes as slow as possible.
L
LL
L WARNING: Risk of tipping over - Avoid sharp bends.
L
LL
L WARNING: Risk of tipping over - Do not exceed the maximum gradient of static
stability downhill (see paragraph "Technical specifications")
Always approach downhill slopes directly from the front. Slantwise approaches can lead to some of
the wheels no longer staying in contact with the ground (danger of tipping over). If one of the back
wheels fails to make contact, the transmission of power will be cut and the scooter come to a
standstill.
The weight of the scooter will increase your downhill speed. Turn the speed control down and adjust
your speed to the conditions.
Avoid sharp bends on downhill slopes. The weight of your scooter could cause your scooter to lift up
on one side or even fall over around bends.

Carpo 4 Deluxe
2012-04
Page 14
2.8 Driving the scooter on ramps
L
LL
L WARNING: Risk of injury - Do not exceed the maximum load of the ramps.
L
LL
L WARNING: Risk of injury - Choose the correct ramps so there cannot be caused any
injury or damage.
L
LL
L WARNING: Risk of injury - Note that the considerable weight of the electric scooter
generated large reverse forces when an attendant is pushing the scooter over the
ramps.
L
LL
L WARNING: Risk of injury - Be sure that the wheel height is high enough to get over the
free height of the ramps. The scooter frame may not touch the ramps.
Should you wish to use ramps to drive over an obstacle, please note the following:
1. Find out from the manufacturer what the maximum load is for the ramps.
2. Drive on the ramps at the lowest speed possible.
3. See the instructions in the chapter "your first trip".
2.9 Driving the scooter over steps
It is possible to drive with your scooter over steps from 100 mm. Please start from 500 mm to take
these step while the user weight is 150 kg.
2.10 Operator control
•Put the ON/OFF key switch on.
•Now the battery level indicator will light up and shows the current level of your batteries.
•Now turn the speed control (, ) to the desired driving speed.
•Push the drive lever with your fingers toward the handle bars (right lever for forward movement,
left lever for backward movement).
•To sound the horn, press the horn button .
•To put on the front and back lights, press the light button .
•To put on the emergency flashers, press button .
•To put on the indicator lights, press the desired button and (left = left indicator, right = right
indicator).
•To stop the scooter loosen the speed lever under the operator control.
Load 150 kg
500 mm 100 mm height

Carpo 4 Deluxe
2012-04
Page 15
Vermeiren is responsible for the changes in the software. For changes in the software contact
Vermeiren.
2.11 Neutral
L
LL
L WARNING: Control your scooter - Never put your scooter in neutral while you are
driving.
L
LL
L WARNING: Control your scooter - Never put your scooter in neutral on slopes. It may
accidentally roll away.
L
LL
L WARNING: Risk of injury - Never pick up the electronic drive before stopping the
motor/gears to prevent motor from overheating.
The scooter is fitted with a freewheel device that is accessible and operable by the attendant or the
user when not sitting in the scooter. You should only use the scooter in neutral to transport the scooter
or to move it out of a danger zone.
Put the scooter in neutral with the motor stop lever on the back of the scooter.
•Driving
1. Put the motor stop lever on drive. This will again interlock the motor and gears.
2. Switch the ON/OFF key ON.
3. Electronically controlled driving is now possible.
•Neutral
1. Switch the ON/OFF key OFF.
2. Put the motor stop lever on neutral (see label). This separates the motor from the gears.
3. The scooter can now be pushed without electronic drive.
1 = Battery level indicator
2 = Speed control (slow)
3 = Speed control (fast)
4 = Speed switch
5 = Horn
6 = Emergency lights
7 = Lights (front and rear)
8 = Indicator (left)
9 = Indicator (right)

Carpo 4 Deluxe
2012-04
Page 16
2.12 Transport in the car
LDANGER: Risk of injury - The scooter is not suited for use as a seat in a motor
vehicle.
LWARNING: Risk of injury - Remove all loose parts prior to transportation.
LWARNING: Risk of injury - No people or objects should be under the scooter, on the
footplate or seat during transportation.
LWARNING: Risk of injury - See that the scooter is attached properly. So you can avoid
injury from the passengers during collision or sudden braking.
LWARNING: Chance of pinching - Do not place fingers between the components of the
scooter.
The best way to transport your scooter in the car is to drive the scooter in the car by using ramps.
When you are not experienced to drive the scooter by using of ramps you can also put the scooter in
neutral mode and push the scooter in the car by using ramps.
When the scooter does not fit in the car it is also possible to transport the scooter by the following
steps:
1. Remove all loose parts prior to transporting (seat, etc.)
2. Store loose parts safely.
3. If possible, remove the batteries / battery boxes from the seat to save weight. (As gel batteries
are closed battery systems, removal for the purpose of transportation will cause no problem.)
4. Fold the steering unit down with the angle adjustment.
5. Place the scooter in the car by 2 or 3 persons. (The weight of the frame and steering unit is
115 kg. This is very heavy to carry).
6. Attach the frame of the scooter securely to the vehicle.
2.13 Automatic Power shut down
In order to avoid accidental battery run down, your scooter is equipped with an automatic power shut
down facility. If the scooter is switched on, after remaining undisturbed for a period of thirty minutes it
will automatically turn off. Should this occur, simply switch your scooter off and back on and it will be
ready to use once again.
Motor stop lever
Drive
Neutral

Carpo 4 Deluxe
2012-04
Page 17
2.14 Charging the batteries
LWARNING: Risk of injury - Take out the key before you start charging.
LWARNING: Risk of fire - Keep away from flammable objects while charging as it may
lead to fire of battery.
LWARNING: Risk of electrical shock - Never connect or disconnect the plug or cable with
wet hands while charging.
Fully recharge your new battery before its first time use.
The light emitting diode (LEDs) in the steering unit indicates the remaining capacity of your batteries. If
the battery charger is turned on and no LED's are lit, check the fuse. If the red LED does not illuminate
the charger is defective, consult your specialist dealer.
Recharge the batteries on a daily basis and in a well-ventilated space, not directly exposed to sunlight.
Do not charge in surroundings where it is humid or under rainfall and morning dews. If you do not do
that and you keep on driving, the output of your scooter will drop very significantly (uphills, bends, dim
headlights). If you ignore these signals too, your scooter will turn off. You should now immediately
recharge your scooter with the accompanying battery charger. Be sure that you charge the battery
fully every time.
After charging or replacing a new battery, drive the vehicle for 2-3 minutes to make sure the battery
capacity is sufficient.
The battery capacity will vary by how you drive with your scooter (repeated starting, stopping,
climbing, rough terrain) and will consume the capacity more quickly. In wintertime, the battery may
respond more slowly and the battery range may be reduced.
Kindly also observe the accompanying operating instructions.
Primary 230V ~ / 50-60 Hz / 270 W max.
Secondary 24 V
/ 8A max.
Model Impulse S
Max. battery cap. 85 Ah
Charging Charge 80% cap. within 8 hrs
1. Turn the key to OFF and take it out.
2. Open the protecting flap of the charging socket.
3. Insert the plug of the charger into the charging socket of the
scooter .
4. Insert the mains plug of the charger into the power socket.
Switch the charger to ON (a few models have no ON/OFF
switch; with these the loading device starts operating
automatically when you insert the mains cable).
5. The charger now starts to charge and the LED (red and
orange) will be lit, which indicates that it is busy charging.
While charging your scooter it is not possible to run, drive
your scooter because the immovable function will be
activated.
6. Once the charging process is complete, the LED (orange)
turns green, thereby indicating that loading is complete. The
charging duration is about 6 hours. To ensure optimum
performance a 10-hour charge is recommended. But we do
not recommend a charging more than 24 consecutive hours.
7. First switch off the charger (if there is no ON/OFF switch,
pull out the mains plug).
8. Pull out the charger out the power socket.
9. Pull out the charger plug from the charging socket of the
scooter. Your scooter is again ready for use.
1

Carpo 4 Deluxe
2012-04
Page 18
•Charge your scooter’s batteries strictly in accordance with the description above. If you charge
the batteries too early, they will gradually lose capacity, thus cutting your scooter’s traveling
range.
•The manufacturer shall decline all liability for damage caused by incorrect charging.
•Use only genuine original batteries. We do not accept any liability for damage caused by using
batteries not supplied by us.
•Do not expose the batteries to temperatures below -10°Celsius or above 50°Celsius.
•If the batteries are opened, all liability of the manufacturer is voided as well as any claim.
•After charging do not leave the charger socket plugged into the scooter, as this will cause a
power drain on the scooter and temporarily reduce its range.
If you decide not to use your scooter for a prolonged period, you must nevertheless recharge it
regularly to keep it in a running condition ready for immediate use.
•If the batteries are not being used for a prolonged period, they will discharge slowly by
themselves (in-depth discharging). Then it becomes impossible to recharge them with the
supplied battery charger. When batteries are not in use, they must be recharged at least every
4 to 8 weeks (depending on the charge indicator).
•Note that if you recharge the batteries too frequently, they will eventually lose their capacity
irretrievably.
•Use only the supplied battery charger and no other charging equipment.
•The manufacturer shall decline all liability for damage caused by improper charging.
•In every case the charging cycle must not be interrupted. The battery charger has an indicator
showing you when the charging cycle has been completed.
•Do not charge any other electrical equipment with your scooter's battery or battery charger.
3 Installation and adjustment
The instructions in this chapter are for the user and the specialist dealer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility. A list of
Vermeiren facilities can be found on the last page.
L
LL
L WARNING: Risk of unsafe settings - Use only the settings described in this manual.
L
LL
L WARNING: Risk of tipping over - Variation allowed adjustments can still change the
stability of your scooter (tilt back or sideways).
3.1 Tools
To set up the scooter the following tools are needed:
•1 Screwdriver
3.2 Manner of delivery
The scooter shall be delivered with:
•1 frame with arm supports, steering unit, rear and front wheels
•1 footplate
•1 seat
•1 backrest
•Manual
•Accessories
•2 batteries, motor