Vermeiren One User manual

User manual
M A N U E L D ' U T I L I S A T I O N
G E B R U I K S A A N W I J Z I N G
G E B R A U C H S A N W E I S U N G
M A N U A L E D I I S T R U Z I O N I
M A N U A L D E I N S T R U C C I O N E S
I N S T R U K C J A O B S Ł U G I
N Á V O D K O B S L U Z E
One

Instrukcje dla wyspecjalizowanego
All rights reserved, including translation.
Tous droits réservés, y compris la traduction.
Alle rechten, inclusief vertaling, voorbehouden.
Alle Rechte, auch an der Übersetzung, vorbehalten.
Tutti i diritti riservati (anche sulla traduzione).
Todos los derechos reservados, incluidos los de la
traducción.
Wszelkie prawa zastrzeżone, łącznie z tłumaczeniem.
Všechna práva vyhrazena, včetně překladu.
EN
Instructions for specialist dealer
This instruction manual is part and parcel of the
product and must accompany every product
sold.
Version: A, 2022-09
FR
Instructions pour les distributeurs
Ce manuel d'instructions fait partie du produit et
doit accompagner chaque produit vendu.
Version : A, 2022-09
NL
Instructies voor de vakhandelaar
Deze handleiding is deel van het product en
dient bij iedere product te worden geleverd.
Versie: A, 2022-09
DE
Hinweise für den Fachhändler
Diese Gebrauchsanweisung ist Bestand-teil des
Produkts und ist bei jeder Produkts
auszuhändigen.
Version: A, 2022-09
IT
Istruzioni per il rivenditore
Il presente Manuale di istruzioni è parte
integrante del prodotto e deve essere fornito
assieme alla prodotto.
Versione: A, 2022-09
ES
Instrucciones destinadas a los distribuidores
especializados
El presente manual de instrucciones es parte
integrante del producto yse debe adjuntar a
todas las producto que se vendan.
Versión: A, 2022-09
PL
sprzedawcy
Niniejsza instrukcja obsługi jest nieodłączną
częścią produktu i musi być dołączona do
każdego sprzedawanego produktu.
Wersja: A, 2022-09
CS
Pokyny pro specializovaného prodejce
Tento návod k obsluze je součástí dodávky a
musí být součástí každého prodaného
produktu.
Verze: A, 2022-09
Basic UDI: 5415174OneHU
Multi version: A, 2022-09

Language index
English
Français
Nederlands
Deutch
Italiano
Español
Polski
Czech
User manual
Manuel d'utilisation
Gebruiksaanwijzing
Bedienungshandbuch
Manuale di istruzioni
Manual de instrucciones
Instrukcja obsługi
Návod k obsluze

This page is intentionally left blank

One
2022-09
Contents
1
EN
NL
Contents
Contents .....................................................................................................................1
Preface........................................................................................................................2
1Your product..................................................................................................3
1.1 Description ....................................................................................................3
2Before use .....................................................................................................4
2.1 Intended use .................................................................................................4
2.2 General safety instructions............................................................................4
2.3 Symbols on the scooter.................................................................................5
2.4 Transport.......................................................................................................5
2.5 Assembly/Disassembly .................................................................................6
2.6 First use and storage ....................................................................................7
3Using your scooter .......................................................................................8
3.1 First ride ........................................................................................................8
3.2 Operating your scooter..................................................................................8
3.3Transfer in and out of the scooter ............................................................... 11
3.4 Brake and free-wheel lever ......................................................................... 11
3.5 Comfort adjustments ................................................................................... 11
3.6 Charging the batteries.................................................................................13
3.7 Thermal fuses ............................................................................................. 14
3.8 Anti-tipping ..................................................................................................15
4Maintenance ................................................................................................16
4.1 Cleaning......................................................................................................16
4.2 Expected lifespan........................................................................................16
4.3 Reuse..........................................................................................................16
4.4 End of use...................................................................................................17
4.5 Warranty......................................................................................................17
5Troubleshooting..........................................................................................18
6Technical specifications.............................................................................19

One
2022-09
Preface
2
EN
NL
Preface
Congratulations! You are now owner of a Vermeiren scooter!
This scooter is made by qualified and committed personnel. It is designed and produced
according to high quality standards guarded by Vermeiren.
Thanks for your trust in the products of Vermeiren. To support you on the use of this scooter and
its operating options, this manual is offered. Please read it carefully; it will help you to get familiar
with the operation, capabilities and limitations of your scooter.
If you still have questions after reading this manual, do not hesitate to contact your specialist
dealer. He/she will be glad to help you on this subject.
Important note
To ensure your safety and to prolong the lifetime of your product, please take good care of it and
have it checked and/serviced on regular base.
This manual reflects the latest product developments. Vermeiren has the right to implement
changes to this type of product without being imposed to any obligation to adapt or replace similar
products previously delivered.
Pictures of the product are used to clarify the instructions in this manual. Details of the depicted
product may deviate from your product.
Information available
On our website http://www.vermeiren.com/ you will always find the most recent version of the
information in this manual. Please consult this website regularly for possible updates.
Visually impaired people can download the electronic version of this manual and have it read out
by means of a text-to-speech software application.
This user manual
For user and specialist dealer
User manual of battery charger
For user and specialist dealer
Service manual for scooters
For specialist dealer
EC declaration of conformity

One
2022-09
Your product
3
EN
NL
1 Your product
1.1 Description
1. Backrest
2. Armrest / Armpad
3. Seat
4. Rear wheel
5. Footplate
6. Front wheel
7. Handgrips
8. Basket
9. Freewheel lever
10. Battery
11. Antitipping
12. Identification plate

One
2022-09
Before use
4
EN
NL
2 Before use
2.1 Intended use
In this paragraph a brief description of the intended use of your scooter is given. Additionally,
relevant warnings are added to the instructions in the other paragraphs. In this way we would like
to make you aware of the possible misuse that may appear.
•This scooter is classified as a class A product and is intended primarily for indoor use.
•This scooter is designed and produced solely to transport one (1) person with a maximum
weight of 136kg. It is not designed to transport goods or objects, or for any other use than
the transport previously described.
•You should NOT use this scooter if you suffer from physical or mental impairments that may
put you, or other people, in danger when driving the scooter, such as; visual impairment,
mental disorder, hemiplegics or paraplegics. For this reason, consult your doctor first and
make sure that your specialist dealer is informed about his advice.
•If applicable, only use accessories and spare parts approved by Vermeiren.
•Please read all technical details and limits of your scooter in chapter 6.
•The warranty on this product is based on normal use and maintenance as described in this
manual. Damage to your product caused by improper use or lack of maintenance will cause
the warranty to lapse.
2.2 General safety instructions
Risk of injuries and/or damage
Please read and follow the instructions in this manual. Otherwise you may get injured or your
scooter may get damaged.
Keep the following general warnings in mind during use:
•Do not use your scooter if you are under the influence of alcohol, medicines or other
substances that may influence your driving abilities.
•Be aware that some parts of your scooter may get very hot or cold due to ambient
temperature, solar radiation, heating devices or due to the motor drive during the ride. Be
careful when touching. Wear protective clothing if the weather is cold. After a ride, wait until
the scooter/motor has cooled down.
•Before switching the scooter on, be aware of the environment/situation in which you are
located. Adjust your speed to this before driving off. We advise you to use the slowest speed
setting to drive indoors. For outdoor driving you can adjust the speed to a suitable speed at
which you feel comfortable and safe.
•ALWAYS keep in mind that your scooter may stop suddenly due to a discharged battery or a
protection that prevents your scooter from further damage. Also check the causes mentioned
in chapter 6.
•Your scooter has been tested for electromagnetic compatibility and complies with the
standard. Nevertheless, sources of electromagnetic fields, such as the fields of mobile
phones, power generators or high-power energy sources, may influence the driving
performance of your scooter. On the other hand, the electronics of your scooter may affect
other electronic appliances as well, such as alarm systems of shops and automatic doors.
We therefore advise you to check your scooter regularly for damage and wear, since these
may enlarge the interference (see also chapter 4).
•Only drive on flat surfaces where all four wheels touch the ground and where there is sufficient
contact to operate the scooter safely.
•Make sure that your hands, clothes, belts, buckles or jewellery don’t get caught by wheels or
other moving parts during use.
CAUTION

One
2022-09
Before use
5
EN
NL
In case a serious incident has occurred involving your product, notify Vermeiren or your specialist
dealer as well as the competent authority in your country.
2.3 Symbols on the scooter
The symbols in following list are applicable for your scooter. Missing symbols can be found in the
relevant ISO standard (ISO 7000, ISO 7001 and IEC 417).
Maximum weight of the user
Indoor use
Maximum safe slope in °
Maximum speed
Type designation
Risk of entrapment
2.4 Transport
2.4.1 Moving the scooter
The best way to carry the scooter is to make use of the neutral mode. Place the scooter in neutral
and roll the scooter to the desired place.
If this is not possible, you can carry the scooter according to the following steps:
1. Switch the scooter off.
2. Remove loose parts (seat and batteries).
3. Store loose parts in a safe place.
4. Carry the frame + steering unit with 2 persons to the desired place. Hold the frame to the
chassis or fixed parts of the frame, not the bumpers or the plastic parts.
2.4.2 Transport in the car
Risk of severe injuries
•Do NOT use your scooter as seat in a vehicle, see the following symbol. The best
way to transport your scooter is to disassemble and lift it (with help) in the vehicle.
Secure the scooter to the vehicle to make sure that it won’t move during cornering
and that it won’t be launched during sudden full braking.
•Remove all loose parts prior to transportation.
•No people or objects should be under the scooter, on the footplate or seat during transportation.
•Do not place fingers between the components of the scooter.
The best way to transport your scooter in the car is to drive the scooter in the car using ramps.
When you are not experienced to drive the scooter using ramps, you can also put the scooter in
neutral mode and push the scooter in the car using ramps.
WARNING

One
2022-09
Before use
6
EN
NL
When the scooter does not fit in the car, it is also possible to transport the scooter according to
the following steps:
1. Disassemble the scooter (see §2.5).
2. Place all parts of the scooter in the car.
3. Attach the frame and other parts of the scooter securely to the vehicle.
2.5 Assembly/Disassembly
Risk of injury
•Turn the scooter off before disassembly / assembly.
•Make sure that your fingers don’t get trapped between moving parts.
The scooter can be disassembled into four main pieces without any tools: the seat, the front
frame,the rear frame, and the battery housing.
2.5.1 Assembly upon delivery
To assemble the scooter upon delivery:
1. Take all parts of the scooter out of the packaging.
2. Fold the steering column up and tighten into place (see §3.5.1).
3. Mount the shopping basket.
4. Place the seat support in the desired seat height (see §3.5.2).
5. Mount the seat (see §3.5.2) and fold the backrest up. Make sure it is securely fixed into
place.
6. Mount the armrests and tighten them into place with the star knobs (see §3.5.3).
7. Mount the battery pack.
8. To change the colour accents, pull off the coloured plates and replace with the desired
colour. A patch of Velcro holds them into place.
9. Place the freewheel lever in drive mode (see §3.4).
2.5.2 Assembly/Disassembly
To disassemble:
1. Switch the scooter off and place the scooter in driving mode with the freewheel lever.
2. Remove the seat by lifting it straight up and off of the scooter frame (see §3.5.2).
3. Remove the battery pack by lifting the pack straight up and off of the scooter.
4. Remove the shopping basket.
CAUTION
1

One
2022-09
Before use
7
EN
NL
5. Fold the steering column down (see §3.5.1).
6. Pull the release lever (1) and separate the front and rear frame from each other.
To assemble:
1. Attach the front and rear frame to each other by pulling the front frame hooks over the rear
frame tube.
2. Fold the steering column up (see §3.5.1).
3. Mount the shopping basket.
4. Mount the battery pack.
5. Mount the seat (see §3.5.2). Make sure it is securely fixed into place.
6. Place the freewheel lever in drive mode (see §3.4).
2.6 First use and storage
Risk of battery damage
•Never completely discharge the battery.
•Do not interrupt the charging cycle; only disconnect the battery charger when the battery is
fully charged.
•Make sure that your scooter is stored dry and indoors to prevent mould from growing and the
upholstery from being damaged. If necessary, use a protective cover.
•Check the technical details for storage, see chapter 6.
Ensure that the battery has been fully charged before using your scooter, ask your dealer if this
has already been done or not. To charge, follow the charging instructions in §3.6.
CAUTION

One
2022-09
Using your scooter
8
EN
NL
3 Using your scooter
Risk of injuries
•First read previous chapters and inform yourself about the intended use. Do NOT use your
scooter unless you have read and fully understood all instructions.
•In case of doubts or questions, do not hesitate to contact your local specialist dealer, your care
provider or technical adviser to help you with this.
3.1 First ride
Risk of injuries and damage
•Make sure that your scooter is switched OFF when getting on and off.
•Always unplug the battery charger from the scooter before starting to drive.
Make sure you are familiar with the operation of your scooter before using it on crowded and
possibly dangerous places. First exercise at a specious, open area with little bystanders and
ask someone to accompany you.
1. Make sure that:
•the scooter is on a flat surface with all wheels touching the ground;
•the battery is fully charged , see § 3.6;
•the motor is coupled, see § 3.4;
•the tyres have the correct tyre pressure, see § 6;
•you have the correct sitting position;
•all adjustments have been fixed securely.
2. Switch your scooter on, see § 3.2.
3. Set the speed to lowest speed setting, see § 3.2.
4. Put both hands on the handgrips of the tiller.
5. Slightly pull the right operating lever to drive to the front. Use the left operating lever to drive
backwards. Release the lever to stop. Repeat this a few times.
6. If you feel confident enough, repeat this at a higher speed.
7. Now try to turn, in forward and backward direction. Repeat this a few times.
8. Make sure your scooter stands stable when ending the ride.
9. Switch off the scooter and remove the key to protect against theft.
3.2 Operating your scooter
Risk of injuries or damage
•Do NOT drive on slopes, obstacles, steps or kerbs larger than the size described in the
technical specifications in chapter 6.
•Take the local road traffic law into consideration; it may differ per country.
•Do not adjust the speed while you are driving.
•Take the weather conditions into consideration. Avoid driving by moistweather, extreme heat,
snow, black ice, freezing temperatures; see technical specifications in chapter 6.
•To prevent tipping over, try to drive with a large turning radius at corners and curves. Do not
cut corners and don’t drive with sharp bends. Try to drive straight in small passages to prevent
getting entrapped.
•Do not lean too far to the left/right/front/back of the scooter to prevent tipping over. Please
pay specially attention when you are negotiating slopes and obstacles.
•Be aware of other road users to whom your scooter may be an obstacle. Pay special attention
when turning, reversing or driving backward. If you are not acquainted with driving backwards,
first practice in an open area. Indicate the direction you intent to go before cornering.
CAUTION
WARNING
WARNING

One
2022-09
Using your scooter
9
EN
NL
•When driving indoors, only use the lowest speed setting.
•Do not turn your scooter "OFF" while driving as this will lead to an emergency stop and
possible risk of accident and injury.
•Keep the braking distance in mind, see also the technical specification in chapter 6. Be aware
that the braking distance depends on speed, surface, weather conditions, slope and weight
of the user.
•Pay attention if the road has holes or gaps that may cause entrapment of the wheels.
3.2.1 Operator control
•Switch the scooter ON by inserting the key (4).
•The battery level indicator (1) will light up and show the current level of your batteries.
•Turn the speed control switch (2) to the desired driving speed.
oTurn clockwise to increase speed control.
oTurn counterclockwise to lower speed control.
•To sound the horn, press the horn button (3).
3.2.2 Operating the brakes
To apply the electromagnetic brakes:
1. Let go of the speed lever. The electromagnetic brake in the motor will be activated, the
scooter will stop.
3.2.3 Driving the scooter
Risk of injuries
•Do not use both sides of the speed lever simultaneously. This might leave you unable to control
your scooter.
Move the speed lever in the required direction:
PULL ACTION BY THE RIGHT HAND = FORWARD MOVEMENT
PULL ACTION BY THE LEFT HAND = BACKWARD MOVEMENT
Pulling the lever more will increase the speed within the selected speed setting. Only use higher
speed settings when you are confident that you can easily operate and control your scooter.
When you switch on the scooter, wait for 3 seconds before pulling the speed lever. Otherwise,
the horn will sound as a warning and the scooter will not move. If this is the case, switch OFF the
scooter and switch ON again.
WARNING
1. Battery level indicator
2. Speed control (slow/fast)
3. Horn
4. Key
5. Speed levers

One
2022-09
Using your scooter
10
EN
NL
3.2.4 Braking
To brake, let go of the speed lever. It will return to the neutral position and slow down your scooter
to a gentle stop. Practice pulling away and braking to get accustomed to the scooter. You need
to be able to estimate how your scooter will react when you drive or brake.
3.2.5 Driving around corners and in bends
Risk of tipping injuries
•Reduce your speed before you enter a curve or corner.
•Always maintain an adequate distance from corners and obstacles.
•Do not drive your vehicle in an "S" pattern or make erratic turnings.
For corners and bends, use both hands to turn the handle bar in the direction you wish to take.
It is very important that you ensure that there is enough space allowing you to go around bends
and corners. Narrow passages must preferably be approached in a large curve so as to allow you
to enter the narrowest part as straight from the front as possible. Bear in mind that your scooter’s
back part will in most cases be wider than the front part.
3.2.6 Backward movement
The speed of rearward movement is automatically reduced in comparison with forward driving.
We also recommend that you use the slowest speed setting when you drive backward.
Do not forget that the steering direction with rearward driving is the opposite of when you go
forward, and that your scooter will turn directly in the required direction.
The horn will beep while driving the scooter backwards.
3.2.7 Taking slopes
Risk of injuries and/or damage
•Never put your scooter in free-wheel mode on a slope. The scooter may start moving, causing
injuries to you or bystanders.
•Do not turn when driving down a slope, since the weight of the scooter may cause tipping over.
•Make sure all four wheel touch the ground while driving up or down.
Driving up
•Drive in a straight line and with higher speed on a slope, and lean slightly forward. When
you drive in an angle or too slow, there is a risk of tipping over or falling.
•Never reverse on a slope.
Going downhill
•Drive in a straight line (forward or backward) and with lower speed on a slope. When you
drive in an angle or too fast, there is a risk of tipping over or falling.
•Lean slightly backward during a forward descent; lean slightly forward during a backward
descent.
3.2.8 Coping with obstacles
Risk of injuries by unexpected movement
•Do not use your scooter on an escalator.
•Always approach a kerb from the front.
•Make sure that all wheels make contact to the ground when driving up or down.
It is possible to drive with your scooter over steps of 45 mm maximum. Take a short run-up to
take these steps if neccessary.
WARNING
WARNING
WARNING

One
2022-09
Using your scooter
11
EN
NL
3.3 Transfer in and out of the scooter
1. Park the scooter as close as possible to the place where
you want to transfer.
2. Make sure that the scooter is switched off.
3. Turn the armpad upwards on the side where you want to
transfer.
4. Swivel the seat until it is facing you (see §3.5.2).
5. Transfer to / from the seat of the scooter.
3.3.1 Correct position in the scooter
Some recommendations to comfortably use the scooter:
1. Position your lower back as close as possible to the
backrest.
2. Make sure your upper legs are horizontal.
3.4 Brake and free-wheel lever
Risk of injuries and/or damage
•Only operate the free-wheel lever when your scooter is turned OFF!
•An attendant should operate the free-wheel lever if you have impaired mobility. NEVER operate
it from sitting position.
The scooter is fitted with a free-wheel device that is accessible and operable by the attendant, or
the user when he/she is not sitting in the scooter. You should only put the scooter in neutral to
transport the scooter or to move it out of a danger zone.
•Drive
1. While the scooter is OFF, switch the freewheel
lever to “drive”.
2. Switch the scooter ON.
3. Electronically controlled driving is now possible.
•Neutral
1. Switch the scooter OFF.
2. Switch the freewheel lever to “neutral”.
3. The scooter can now be pushed without
electronic drive.
3.5 Comfort adjustments
Risk of injuries and/or damage
•Never perform adjustments while driving.
•The allowed adjustments can change the stability of your scooter (tilting back or sideways).
WARNING
WARNING

One
2022-09
Using your scooter
12
EN
NL
3.5.1 Adjusting the steering unit
Risk of injury
•Turn the scooter off before you adjust the angle of the steering unit.
•Do not lean with your whole body on the steering unit.
The steering unit can be adjusted to many different positions (stepless) to suit
each driver.
1. Loosen the star knob (6).
2. Adjust the steering unit to the desired position.
3. Fasten the star knob (6).
3.5.2 Adjusting the seat
Risk of injury
•Make sure that the seat is locked securely.
Removing the seat
1. Pull up the seat lever.
2. Turn the seat a little bit and lift the seat out of the adjustment
bar. If you encounter resistance when removing the seat,
disengage the seat rotation lever and swivel the seat back
and forth while lifting up the seat.
3. Release the seat lever.
Placing and locking the seat into place
1. Pull up the seat lever.
2. Place the seat on the adjustment bar and, at the same time, keep the seat lever pressed in.
3. Release the seat lever.
4. Make sure that the seat is firmly secured.
Swivelling the seat
1. Pull up the seat lever.
2. Turn the seat in the desired direction.
3. Release the seat lever.
4. Make sure that the seat is firmly secured.
Seat height adjustment
The seat height can be adjusted in 4 positions (range 45
mm).
1. Remove the seat and battery pack.
2. Remove the locking pin that holds the seat support
into place.
3. Raise/Lower the seat support to the desired height.
4. Insert the locking pin to secure the seat support into
place.
5. Replace the seat and battery pack. Make sure
everything is firmly secured.
WARNING
WARNING

One
2022-09
Using your scooter
13
EN
NL
3.5.3 Adjusting the armrests
Risk of tipping over
•Make sure that the armrests are positioned symmetrically from the seat.
The armrest can be adjusted in width.
1. Remove the star knob underneath the seat.
2. Grasp the inner tube.
3. Move the tube to adjust the armrest to the desired width
(range: 100 mm each side).
4. Retighten the star knob.
5. Make sure that the armrest is well secured.
3.6 Charging the batteries
Risk of injuries and damage due to fire
•Only use the battery charger delivered with the scooter. The use of any other charger may be
dangerous (fire hazard).
•The battery charger is only intended to charge the batteries delivered with the scooter, not to
charge any other batteries.
•Do not adapt any of the delivered parts, like cables, plugs or battery charger. Never open or
change the battery or the connection points.
•Protect the battery and battery charger against flames, high and low temperatures (see chapter
6), moisture, sunshine, severe shocks (for example dropping). Do NOT use the battery if this
has been the case.
•Charge the battery with the battery charger, indoors, in a well-ventilated area, out of children's
reach.
Risk of damage
•Battery self-discharge and the quiescent current of the connected users will drain the battery
charge slowly. The battery may be irreversibly damaged if the battery is fully discharged.
Therefore, make sure that the battery is charged on time:
oWith intensive use (long distances, daily use): Immediately recharge after use.
oWith average use (short distances, daily or a few times a week): Charge when battery
indicator shows 50% discharge.
oWith little use or storage: Charge once a week.
•Read the storage and maintenance instructions in chapter 4 and technical
details in chapter 6.
•Only disconnect the battery charger when the battery is fully charged, see
the following symbols on the charger.
•Do not charge batteries below 0°C. Move the battery to a warmer place
and start charging.
•Keep the connection point for the battery charger free of dust and other contamination.
•In case of any problems whereby the battery cannot be charged according to following
instructions, please contact your specialist dealer.
•It is recommended to unplug the battery charger from the mains when not in use. This is
to prevent unnecessary energy consumption.
WARNING
CAUTION
CAUTION

One
2022-09
Using your scooter
14
EN
NL
The light emitting diode (LEDs) in the steering unit indicates the remaining capacity of your
batteries. If the battery charger is turned on and no LED's are lit, check the fuse. If the red LED
does not illuminate, the charger is defective.Consult your specialist dealer.
1. Switch the scooter OFF and remove the key.
2. FIRST connect the battery charger to a 230V AC power socket.
3. If applicable, open the cover of the charging point on the scooter.
4. Connect the charger.
5. When the battery is fully loaded, disconnect the scooter from the charger.
6. Switch the scooter ON and check if all lights of the battery status indicator are ON.
7. Remove the charger from the socket, let it cool down and store it in a dry location.
When the operating console displays the warning code “Drive inhibit” after charging, make
sure that the battery charger is disconnected. This safety measure prevents driving with the
charger still connected to the supply grid.
3.7 Thermal fuses To protect the motor against overload, your scooter has
a thermal safety mechanism on the rear. The thermal
fuse will automatically cut off the motor to prevent
overheating and thus rapid wear and tear or
breakdowns. You can access the thermal safety device
through a gap in the back of the synthetic cover.
The thermal safety device can be activated if you go up
or down slopes that exceed the maximum specified
gradient. Nominal loads that exceed the permitted
maximum could also cause the device to jump out. Likewise, if you keep on driving with the engine
brake on, it could result in overload. The maximum values not to exceed are indicated in §6.
To be able to use the scooter again, remove the overload and wait until the motor has cooled
down. Then gently press the thermal safety mechanism back in. Your scooter is now ready for
use again.
Socket battery charger
1. Battery pack
2. Operator control

One
2022-09
Using your scooter
15
EN
NL
3.8 Anti-tipping
An anti-tipping (1) is fixed to the frame of the
scooter on the rear side. It is not possible to
remove them. The anti-tipping is there for
your safety. It prevents the scooter from
tipping over backward when you drive over
small obstacles that do NOT exceed the
maximum height as specified in §6.

One
2022-09
Maintenance
16
EN
NL
4 Maintenance
Regular care ensures that your scooter is preserved in a perfectly functional condition. For
the maintenance manual, refer to the Vermeiren website: www.vermeiren.com.
Risk of injuries and damage
Repairs and replacements may only be undertaken by trained persons and only genuine
replacement parts of Vermeiren should be used.
The last page of this manual contains a registration form for the specialist dealer to record
each service.
The service frequency depends on the frequency and intensity of use. Contact your dealer to
agree to a common timetable for inspection/maintenance/repair.
Before each use
Visually inspect the following points:
•Battery status: Charge the battery when necessary, see § 3.6.
•Condition of wheels/tyres: Correct pressure, profile, no damage.
•General condition.
Contact your specialist dealer for possible repairs or part replacements.
Monthly
If your scooter is stored for a longer period, you still need to charge the batteries monthly. For
more information, see § 3.6.
Yearly or more often
Have your scooter inspected and serviced by your specialist dealer at least once a year, or more
often. The minimum maintenance frequency depends on the frequency of use and should
therefore be commonly agreed upon with your specialist dealer.
If stored
Make sure that your scooter is stored in a dry environment to prevent mould from growing or the
upholstery from being damaged. Remove the battery pack to prevent it from being damaged.
4.1 Cleaning
Risk of damage by moisture
•Keep the operating console clean and protect it from water and rain.
•Never use a hose or high-pressure cleaner to clean the scooter.
Wipe all rigid parts of the scooter with a damp cloth (not drenched). If necessary, use a mild soap,
suitable for varnishes and synthetics.
The upholstery can be cleaned with lukewarm water and a mild soap. Do not use abrasive
cleaning agents to clean.
Keep the ventilation openings of the battery charger clean and free of accumulated dust. Blow
away the dust and clean the battery charger enclosure with a slightly moistened cloth, if required.
4.2 Expected lifespan
The average lifespan of your scooter is 5 years. Depending on the frequency of use, driving
circumstances and maintenance, the lifespan of your scooter will increase or decrease.
4.3 Reuse
Before each reuse, have the scooter disinfected, inspected and serviced according to the
instructions in the maintenance manual.
CAUTION
CAUTION