Vermeiren Mercurius 4D User manual

VERMEIREN
INSTALLATION MANUAL
Mercurius 4D

Mercurius 4D
2021-02
Content
Installation manual
- 1 -
EN
NL
PL
CS
Content
Content.......................................................................................................................1
Preface........................................................................................................................2
1This product ..................................................................................................3
2Scope of delivery ..........................................................................................4
3Assembly and adjustments .........................................................................5
3.1 Tools ...............................................................................................................5
3.2 Adjusting the scooter to the user ....................................................................6
3.3 Changing the batteries....................................................................................6
3.4 Tyre changing .................................................................................................7

Mercurius 4D
2021-02
Preface
Installation manual
- 2 -
EN
NL
PL
CS
Preface
To support you on the installation and repairs of this scooter, we provide you with this installation
manual. Please read it carefully. If you still have questions after reading this manual, do not
hesitate to contact Vermeiren.
Important note
Pictures of the product are used to clarify the instructions. Details of the shown product may
deviate from your product.
Available information
On our website http://www.vermeiren.com/ you will always find the most recent version of
the information described in this manual. Please consult this website regularly for possible
updates.
Visually impaired people can download the electronic version of this manual and have it read out
by means of a text-to-speech software application.
User manual
For user and specialist dealer
Installation instructions (Instructions for detail adjustments and (dis)assembly)
For specialist dealer
Service manual for scooters
For specialist dealer
EC declaration of conformity

Mercurius 4D
2021-02
This product
Installation manual
- 3 -
EN
NL
PL
CS
1 This product
1. Headrest
2. Backrest
3. Armrest / Armpad
4. Seat
5. Rear wheel
6. Footplate
7. Front wheel
8. Front light
9. Indicator lights
10. Rearview mirror
11. Speed lever
12. Handgrips
13. Basket
14. Freewheel lever
15. Rear lights
16. Antitipping
17. Identification plate
1
2
3
4
5
6
7
8
9
10
11
12
14
14
13
9
15
16
17

Mercurius 4D
2021-02
Scope of delivery
Installation manual
- 4 -
EN
NL
PL
CS
2 Scope of delivery
The following items are part of the delivery:
•Frame with armrests, steering unit, rear and front wheels
•Footplate
•Seat + backrest
•Batteries (2x), motor
•Basket
•Accessories
•Manual
Before use, check if everything is included and that no products are damaged.
Please note that the basic configuration may differ in different countries. Contact your specialist
dealer.

Mercurius 4D
2021-02
Assembly and adjustments
Installation manual
- 5 -
EN
NL
PL
CS
3 Assembly and adjustments
Important remarks
•Read the user manual of this scooter.
•Be aware of the technical details and limits of intended use; see the user manual.
•For more information, contact Vermeiren.
3.1 Tools
To set up the scooter, the following tools are needed:
•Wrench set n° 13, 17
•Allen keyset n° 6, 8
Risk of injuries or damage
•The scooter needs to be (dis)assembled and adjusted by a specialist dealer according to the
instructions in this chapter.
•Only use parts and tools described in this manual.
•Prevent bystanders from accessing the (dis)assembling area.
•Keep the (dis)assembling area clean and tidy, to prevent falling.
•Collect all small parts in a box or bag.
•While (dis)assembling and operating the scooter, make sure no objects or body parts get
caught between moving parts. In particular, pay attention to the position of the cables.
•Turn the scooter off before you perform any mechanical adjustments and make sure that the
free-wheel lever is in braking position.
•Make sure all screws are firmly secured before driving.
•Software changes are only allowed if executed by skilled personnel, taking into account the
user and environment (stability, accellaration, indoor/outdoor, etc.).
CAUTION

Mercurius 4D
2021-02
Assembly and adjustments
Installation manual
- 6 -
EN
NL
PL
CS
3.2 Adjusting the scooter to the user
3.2.1 Seat height adjustment
The seat can be adjusted in 2 different seat heights (distance: 25 mm).
1. Remove the seat.
2. Remove the bolt (3) and nut (5).
3. Move the adjustment bar (1) upwards/downwards in the receiver (6), and place in a
comfortable seat height.
4. Retighten the adjustment bar (1) with the bolt (3) and nut (5).
5. Replace the seat.
6. Make sure that the seat is locked securely.
3.3 Changing the batteries
Risk of injuries and damage
•The batteries must only be replaced by trained personnel
•Do not come into contact with the acid from the batteries.
•Replace the batteries in a well-ventilated room.
•Make sure that the ventilation holes of the battery housing are free from any contaminations.
•First read the charging instructions in the user manual before charging the batteries.
Always change both batteries at the same moment to prevent rapid degeneration.
The wiring and charger are well-situated in the scooter. Do not attempt to relocate the wiring by
yourself. The improper installation of the wiring may result in pinched wires between the battery
box, which cause failure to the electronic system of your scooter.
Make sure that the battery cables are connected to the right battery.
Risk of injury
•Make sure that all movable parts are assembled properly.
CAUTION
1 = Adjustment bar
2 = Washer
3 = Bolt
4 = Washer
5 = Nut
6 = Receiver
1
3
5
6
2
4
WARNING

Mercurius 4D
2021-02
Assembly and adjustments
Installation manual
- 7 -
EN
NL
PL
CS
To disassemble:
•Switch the scooter off.
•Remove the seat (see user manual).
•Lift off the rear plastic cover of the batteries.
•Loosen the straps used to keep the batteries
in place.
•Unplug all battery plugs (not the pole
connectors) and all cable plug- and socket
connections.
•Lift the batteries out.
To reassemble:
•Put the batteries back in and connect to the battery plugs (plugs of the same colorgo together).
•Check that the cables are installed properly and replace both batteries together.
•Use the straps to fasten the batteries in such a waythat they will not move, even during drives.
•Mount the rear plastic cover over the batteries.
•Mount the seat (see user manual).
3.4 Tyre changing
Risk of injuries and damage
•Make sure that all air is released from the tyre, before removing it.
•Make sure that no body parts, the inner tube nor any other objects are pinched between tyre
and rim.
•Handle carefully to prevent damage to the rim.
•Make sure that the tyre pressure is correct, see the pressure indication on the tyres.
•Inflate the tyre using inflating equipment which complies to regulations and with a pressure
indication in “bar”.
•Make sure all screws are firmly secured by hand before driving with the scooter. Screw
adhesive (ex. Loctite) should be applied to the screws on the flange. Screw adhesive will only
work if the thread is free of grease and particles.
DISMANTLING
1. Unscrew and remove the 4 screws that attach the wheel to the flange.
2. Let the air out of the wheel by lightly pressing the pressure pin on the valve.
3. Unscrew the 5 screws of the rim. Separate the rim sides.
ASSEMBLY
1. Insert the partly-filled inner tube into the tyre.
2. Connect the two sides of the rim on the tyres and fasten them again with the 5 screws.
3. Put the valve through the hole in the rim.
4. Put the wheel back on the flange and secure these connection with the 4 screws. Inflate the
wheel to the recommended tyre pressure.
Check all around on both sides that the tube is not pinched between the rim and the edge of the
tyre. Lightly push the air valve inwards and pull it out again to make sure that the tyre is positioned
properly in the region of the air valve.
CAUTION

© Vermeiren Group 2021
Vermeiren GROUP
Vermeirenplein 1 / 15
2920 Kalmthout
BE
website: www.vermeiren.com
Instructions for specialist dealer
This instruction manual is part and parcel of the product and must accompany
every product sold.
All rights reserved, including translation.
No part of this manual may be reproduced in any form what so ever (print,
photocopy, microfilm or any other process) without written permission of the
publisher, or processed, duplicated or distributed by using electronic systems.
R.E.: Vermeiren GROUP, Vermeirenplein 1/15 - 2920 Kalmthout –Belgium
Installation manual - Mercurius 4D_EN_A5_2021-02_B
Basic UDI: 5415174 122124Mercur4D DU
Version: B, 2021-02