VEVOR GSC7100 User manual

Support and E-Warranty Certificate https://www.vevor.com/support
INSTRUCTIONS FOR TOOL CABINET
ASSEMBLY
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:GSC7100
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Tool Cabinet
Assembly

- 2 -
Please read instructions carefully before assembly.
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
Assembly Parts List
Part
Description
Qty
1
Left back
1
2
Right back
1
3
Screw-ST4.2*10
24
4
Left side panel
1
5
Right side panel
1
6
Kickplate
1

- 3 -
ADDITIONAL TOOLS REQUIRED:
1.Phillips Head Screwdriver.
2. Rubber Mallet (or hammer with soft covering).
SAFETY TIPS:
1. Please handle metal edges carefully.
2. Prepare a soft, level surface on ground level before commencing assembly.
3. Once assembled, maximum safe load limit per shelf is 200 lb, evenly
distributed.
4. Always fill shelves from the bottom up, to help prevent any toppling issues.
5.Tighten the cabinet to the wall by using screw when finishing assembly
MAINTENANCE:
To clean and maintain your unit, we recommend periodic cleaning using a soft
7
Bolt-M6*15
1
Part
Description
Qty
8
Bottom
1
9
Top cover
1
10
Shelf clip
8
11
shelf
4
12
Left door
1
13
Right door
1
14
Door stop
4

- 4 -
cloth and gentle natural cleaner.
Table of Parameters
Items
Description
Name
Tool Cabinet
Model
GSC7100
External Dimensions
800×400×1750 mm
31.5×15.75×70 inch
Package Size
1820×480×175 mm
G.W.
43 kg
Instructions for Installation
STEP 1
①Left back and ②right back align to holes of each, screw them with 8
screw-ST4.2*10(1).
S

- 5 -
STEP 2
a)Remove the protective covers from left side panel(4) and right side panel(5).
b) Left side panel(4)and right side panel (1)align to holes of each, screw them with
8 ST4.2*10 screws.
STEP 3
Right side panel (5)and right back(2) align to holes of each, screw them with 8
ST4.2*10 screws.

- 6 -
STEP 4
Assemble the kickplate(6) on the inside between left side panel(4) and right side
panel(5), aligns holes to two lateral plates, and secure them with 4 M6*15 bolts.
STEP 5
Assemble bottom (8) to limit slot.
STEP 6
Assemble top cover(9) to limit slot,aligns holes to 3 plates and secure it with 4
M6*15.

- 7 -
STEP 7
a)Fit the shelf clip(10) into the round hole.
b)Stuck shelf(11)into the inside of the cabinet.

- 8 -
STEP 8
a) Press door stop(14) into the holes of the top cover and the bottom .
b) Insert the pin at the bottom of the left door (12) into the bottom hole first,then
insert the springlatch at the top of the left door into the top cover hole，and iInstall
the right door (13) on the body in the
same way.

- 9 -
Manufacturer：Zhongshan City CYZ Coating Tech.Co.,Ltd.
Address：Plant1,No.78,Zhongheng Avenue,Baoyu Village, Henglan Town,
Zhongshan City,Guangdong Province,China
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
MADE IN CHINA
REP
EC
REP
UK

Support and E-Warranty Certificate https://www.vevor.com/support