VEVOR JL-WB05-3 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
WORKBENCH WITH PEGBOARD
USER'S MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:JL-WB05-3
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WORKBENCH WITH
PEGBOARD

- 2 -
SAFE INSTRUCTIONS
：Please read this user manual carefully！
Assembly Precautions
1.Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during
assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
5.Do not assemble when tired or when under the influence of alcohol,
drugs or medication.
6.Weight capacity and other product capabilities apply to properly and
completely assembled product only.
7.Assemble on a flat, level, hard and smooth surface capable of safely
supporting a fully loaded workbench.
Use Precautions
1. Do not attach or mount this product to a vehicle.This may cause
personal injury or product damage.
2. Do not stand or step on this product.You may fall which may cause
personal injury.
3. Keep the product on level surfaces.The product may become unstable
and tip if stored or moved on an unlevel surface,which may cause
personal injury or product damage.
4. Lock the drawers before moving this product.The drawers could come
open and make the product unstable and tip,which may cause
personal or product damage.
5. Keep children and bystanders away while loading,unloading and
moving the product.
6. Do not lift the product directly with a forklift or tow with any mechanical

- 3 -
devices.
7. Do not exceed the maximum load capacity,including contents.Do not
exceed the maximum load capacity of each drawer.Do not exceed the
maximum load capacity of each tray.
8. Do not alter this product in any manner.
9. The box contains some small components; please place them properly
before installation to keep them away from kids and ensure safety.
10. Before installing the socket, the desktop should be cleaned to ensure
that there are no stains on the desktop. In particular, attention should
be paid to not bringing water into the socket so as to avoid safety
problems during subsequent use.
CAUTION: Carefully read instructions and procedures for safe operations.
SAVE THESE INSTRUCTIONS
PRODUCT INTRODUCTION
JL-WB05-3
Maximum Load Capacity
220lbs
Desktop Size
120*59.5cm
Material
MDF, Metal
Product Dimensions
120*60W*150cm
Rating(s)
120V~ 60Hz Max.1500W(Power Strip) with
14W LED Light
Pegboard
118.5*59cm
Model
SPEC.

- 4 -
STRUCTURE DIAGRAM
1. Pegboard 2.Desktop 3.Power strip 4.Leg 5. Drawer
6.LED Light
1
2
3
6
5
4

- 5 -
COMPONENTS
Name
Component
Quantity
1
2
2L
1
2R
1
3
3
3（1）
1
4
2
5
1
6
2
7
2
8L
1

- 6 -
8R
1
9L
1
9R
1
10
2
11
2
12L
2
12R
2
13L
1
13R
1
14L
1
14R
1

- 7 -
15
1
16
1
17
1
18
1
19
2
20
2
21
16
22
28
23
30
24
1
25
1

- 8 -
INSTALLATION INSTRUCTION
STEP 1: Install the lower workbench support.

- 9 -
STEP 2: Install the upper workbench support.

- 10 -
STEP 3:Assemble drawer and install drawer guide.
.

- 11 -
STEP 4:Install pegboard and supports.

- 12 -
STEP 5:Install roof and cover the upper and lower desktop. Install power
strip and LED light.

- 13 -
MAINTENANCE
1. Please try to avoid putting wet items on desktop.
2. Dust off regularly with a clean rag, and arrange items neatly on desktop.
3. Don't let it sit in the sun for too long.
4. Check the table regularly to prevent screws from loosening and falling
off.

- 14 -
VEVOR STORE INC
Address: 9448 RINCHMOND PL #E RANCHO CUCAMONGA,
California, 91730 United States of America
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support