Viking PS4043 User manual

PS4043
Pilot Suit
App. according to ETSO 2C503
Head office: VIKING LIFE-SAVING EQUIPMENT A/S · Saedding Ringvej 13 · 6710 Esbjerg V · Denmark
Tel [phone] · Fax [phone]· www.viking-life.com · e-mail: [e-mail]

PS4043 - Pilot Suit
Fig. 1
Fig. 2
Fig. 3

1. DONNING
See figure 1.
1. Remove footwear.
2. Don the lining.
3. Don the suit like an ordinary coverall.
4. Pull the neck seal over your head. Zip the front zipper.
5. Squat down to exhaust air.
6. Don the lifejacket.
7. Before immersion, don the hood and gloves. NB: The hood is placed in the right
leg pocket. The gloves are placed in the sleeve pocket.
2. MAINTENANCE
After use
Hang the suit on a wide hanger and allow to air.
We recommend to rub a suited lubricant on the zipper. Put talc powder on the inside of the wrist
and neck seals to reduce sticking.
3. PACKING
See figure 2.
1. Place the suit flat on a clean surface. Unzip.
2a. Fold up the socks to the crotch.
2b. Fold the legs up over the socks.
2c. Fold the sleeves across the chest.
3. Place the suit into the bag.
4. CLEANING
See figure 3.
5. INSPECTION, SERVICE AND REPAIR
We recommend that the suit is inspected at an approved servicing station once a year. Repairs
should be carried out by an approved servicing station.
6. SPECIAL CONDITIONS
Store the suit in a dark and dry place in room temperature.
PS4043 - Pilot Suit

PRINTED IN DENMARK VIKING (08.16)