Visionis VIS-7102 User manual

Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
www.visionistech.com
[email protected]
Technology Within Your Reach
The VIS-7102 kit comes with an indoor no touch infrared
request to exit button and a transmitter (remote). The exit
button has a built-in 433MHz wireless receiver that allows to
open the door using the transmitter. It also comes with an
LED Light that shows a blue color light when the button is in
standby mode and a green light when the button is active.
With this No Touch Exit Button, you no longer have to
physically push a button to exit. All you have to do is wave
your hand and the door will open. This no touch exit button
also includes a delay feature to up to 30 seconds.
The VISIONIS Request-to Exit Buttons may be connected to
the request-to-exit input of any access control device or
directly connected to an electromagnetic lock or electric
strike device.
SPECIFICATIONS EXIT BUTTON
Power: DC12/24V
Output Contact: NO/NC/COM
Time Delay: 0~30s (Adjustable)
Sensitive Distance: 5-20cm (1.97-7.87in.) - Adjustable
Communication Distance with Remote: 20 Meters
(65 feet)
Compatible Transmitter: VIS-8017
LED Indicator: Blue LED (Standby) // Green LED (Active)
Mechanical Life: 500,000 Tested
Mounting Way: Surface Mount
Material: ABS
Operating Humidity: 0-95% (relative humidity)
Operating Temperature: -20°C ~ +55°C (-4°F - 131°F)
Weight: 0.094kg
VIS-7102
ref.
INSTALLATION MANUAL
Blue LED
(Standby)
Green LED
(Active)
Rear
View
IMPORTANT: The no touch request to exit button is NOT COMPATIBLE with the VIS-8004 transmitter, it will only work
with the VIS-8017.
Indoor ABS No Touch Infrared Request To Exit
Button With Time Delay + Built-in 433MHz
Wireless Receiver + 2-Button 433MHz
Transmitter (Remote) Kit
VIS-8017
Board
Transmitter
(VIS-8017)
Exit Button (VIS-7101)

Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
www.visionistech.com
[email protected]
Technology Within Your Reach
Dimensions
14mm
(0.55in.)
70mm (2.76in.)
54mm (2.13in.)
26mm (1.02in.)
45mm (1.77in.)
90mm (3.54in.)
83mm (3.27in.)
115mm (4.53in.)
VIS-7102
ref.
Indoor ABS No Touch Infrared Request To Exit
Button With Time Delay + Built-in 433MHz
Wireless Receiver + 2-Button 433MHz
Transmitter (Remote) Kit
37mm (1.46in.)
18mm
(0.71in.)
13mm
(0.51in.)
25mm
(0.98in.)
68mm (2.68in.)
37mm (1.46in.)
68mm (2.68in.)
EXIT BUTTON
TRANSMITTER (REMOTE)

Technology Within Your Reach
VIS-7102
ref.
Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
www.visionistech.com
[email protected]
Time Delay and Sensitive Distance Adjustment as Below
Turn left short
Turn right long
1 3362 3
Turn left near
Turn right far
1 3362 3
VR1: Time Delay VR2: Sensitive Distance
Indoor ABS No Touch Infrared Request To Exit
Button With Time Delay + Built-in 433MHz
Wireless Receiver + 2-Button 433MHz
Transmitter (Remote) Kit

Pair the Device
When power on, press the “S1” button on the back of the exit button, then the blue light will flash, it means the
device is on pairing mode. Press the button on the remote control one time, then the buzzer sound once, it means it
has been paired successfully, Press “S1” button again on the back of the exit button to exit the pairing mode. You
can pair up to 30 remotes maximum.
Remark:
1. If no activity during 30 second it will quit pairing mode.
2. If during pairing mode button S1 is not pressed to exit the pairing mode in 30s then the system will return to
normal mode and will not save the pairing.
Delete the Device Exit Button Wiring Diagram
Hold the “S1” button on the back of the exit button
for 5 seconds and the light will flash , then release
the “S1” button.
Green
White
Yellow
Black
Red
NO
NC
COM
GND
DC12/24V
J1
Select the Programming Mode
There are 2 programming modes:
Put the jumper on the N Port: Momentary mode (Open door with any button on the remote and the door will close
itself after 4 seconds.)
Put the jumper on the L Port: Latch mode (One button to open and the other button to close with the remote
control.)
Technology Within Your Reach
VIS-7102
ref.
Indoor ABS No Touch Infrared Request To Exit
Button With Time Delay + Built-in 433MHz
Wireless Receiver + 2-Button 433MHz
Transmitter (Remote) Kit
Disclaimer: VISIONIS reserve the right to go ahead with any modifications of models or features or price without forewarning. All the
information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the
improper installation of this kit. If you are not handy with electrical equipment you should contact a professional electrician. You will also
need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for
any damage or fees that can occur.
www.visionistech.com
[email protected]