Visionis VIS-8014 User manual

Indoor Access Control 2.4GHz Wireless
Request to Exit Button Battery Operated
VIS-8013 / VIS-8014
User Manual

INTRODUCTION
•2.4G Communication Frequency
•Easy installation by 3M stickers
•Dry contact version optional (current: 2A)
•2032 lithium battery operated
•Dimension: 4.0W x 8.3L x 1.5D (cm)
Specifications
Operating Voltage
1unit of 2023 Lithium battery (INCLUDED)
Current
Idle Current
Working Current
≤6uA
≤5mA
Communication Frequency
2.4G
Communication Distance
15m Maximum
Environment
Operating Temperature
Operating Humidity
Indoor
-20°C~60°C (-4°F~140°F)
0%~86%RH
Physical
Dimensions
Unit Weight
ABS Shell
83L × 40W × 16D (mm) - 3.26L x 1.57W x 0.62D (in.)
30g
INSTALLATION
Attention: there is a battery spacer inside the Wireless Exit Button, please take it off before
installation.
Method 1: Stick by 3M stickers
The device packed with 3M double-side Sticker, can easily stick on Metal door, Glass Door, Wooden Door, or Smooth
Wall.
Method 2: Install by screws

Pair with Controller
To pair the Wireless Exit Button and Mini Controller:
Wireless Exit Button: Remove the back cover, and press the button “Pair”
Mini Controller: Remove the back cover, and press the button “Pair”
If pair successfully, there will be one beep from both the controller and the exit button, the button can pair
continuously; if not, there will be three short beeps, then please repeat the setting.