Vivo CHAIR-K03D User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
SKU: CHAIR-K03D
Wooden Kneeling Chair with Wheels
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
https://vivo-us.com/products/chair-k03d

2
PACKAGE CONTENTS
TOOLS NEEDED
200lbs
(90.71kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
D (x1)
Seat Pad
E(x1)
Knee Pad
A(x1)
Lower Frame
T-A (x2)
5mm Allen
Wrench
B (x1)
Upper Frame
C(x1)
Adjustable
Support
F (x4)
Caster
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-B (x4)
M6x35 Screw
S-C (x4)
M6x40 Screw
with Washer
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
S-A (x6)
M6x12 Screw
S-D (x2)
Long Sleeve
Nut
S-E (x1)
Short Sleeve
Nut
T-B (x1)
Hex Wrench

3
ASSEMBLY STEPS
STEP 1
Insert Lower Frame (A) into Upper Frame (B). Assemble frames using the Long Sleeve Nut
(S-D) with M6x12 Screws (S-A) and tighten using 5mm Allen Wrenches (T-A).
S-A
S-D
T-A
A
B

STEP 3
Connect Adjustable Support (C) to rear of Lower Frame (A) using Short Sleeve Nut (S-E)
with M6x12 Screws (S-A) and tighten with 5mm Allen Wrenches (T-A).
STEP 2
Assemble Adjustable Support (C) to rear of Upper Frame (B) using Long Sleeve Nut (S-D)
with M6x12 Screws (S-A) and tighten using 5mm Allen Wrenches (T-A).
4
C
B
S-A
S-D
T-A
T-A
C
A
S-E
S-A

STEP 4
Assemble Seat Pad (D) to rear of Upper Frame (B) using M6x40 Screws (S-C) and tighten
with 5mm Allen Wrench (T-A).
5
STEP 5
Assemble Knee Pad (E) to front of Lower Frame (A) using M6x35mm Screws (S-B) and
tighten with 5mm Allen Wrench (T-A).
D
B
S-C
T-A
S-B
A
T-A
E

STEP 6
Thread Casters (F) into holes on underside of the frames using Hex Wrench (T-B).
6
F
T-B

Adjust seat height and angle by turning the knob on the Adjustable Support (C).
STEP 7
7
C

LAST UPDATED: 05/25/2021
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303