Vivo DESK-EP40TW User manual

White 40" x 24" Electric Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-ep40tb
SKU: DESK-EP40TW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING!
PACKAGE CONTENTS
A (x2)
Desktop
B (x1)
Crossbar
C(x2)
Side Bracket
D(x1)
Sync Rod
E(x1)
Le Leg
F (x1)
Right Leg
G (x2)
Foot
I (x1)
Leg Motor
S-A (x4)
M8x37mm Screw
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-B (x6)
M6x10mm Screw
S-C (x8)
M6x30mm Screw
S-D (x26)
ST5x16mm Screw
M(x2)
Cable Clip
T-A (x1)
2mm Allen Wrench
T-B (x1)
4mm Allen Wrench
T-C (x1)
5mm Allen Wrench
H (x3)
Connecting Plate
J (x1)
AC Adapter
N(x12)
Rubber Pad
NOTE SOME EXTRA HARDWARE INCLUDED MAY NOT BE USED.
K (x1)
Control Panel
L (x4)
Foot Pad
S-E (x4)
M5x15mm Screw

3
176lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
Phillips
Screwdriver
Drill
Level
A
H
B
C
C
D
I
E
F
J
K
GG

4
Place Feet (G) on top of Le Leg (E) and Right Leg (F) and attach using M6x30mm Screws (S-C) and
5mm Allen Wrench (T-C). Screw Foot Pads (L) into Feet (G).
STEP 1
ASSEMBLY STEPS
Assemble Leg Motor (I) to Le Leg (E) using M5x12mm Screws (S-E) and 4mm Allen Wrench (T-B). Mount
Crossbar (B) to Le Leg (E) and Right Leg (F) using M8x37mm Screws (S-A) and 5mm Allen Wrench (T-C).
STEP 2
I
E
S-E
T-B
B
E
F
S-A
T-C
G
E
F
S-C
T-C
L

5
STEP 3
Assemble Side Brackets (C) to the frame assembly using M6x10mm Screws (S-B) and 4mm Allen
Wrench (T-B).
STEP 4
C
S-B
T-B
Loosen the nut on
Sync Rod (D).
Insert the hex sha
on Sync Rod (D) into
Right Leg (F).
Insert the other end
of Sync Rod (D) into
the slot on Leg Motor
(I). Secure Sync Rod
(D) to the slot by
tightening the
pre-installed set screw using 2mm Allen
Wrench (T-A).
Retighten the nut
on Sync Rod (D).
Insert Rubber Pads (N)
into frame assembly.
D
F
I
T-A
N

6
STEP 5
Assemble both halves of Desktop (A) using Connecting Plates (H) with ST5x16mm Screws (S-D) and a
Phillips screwdriver.
STEP 6
Place the frame assembly upside down on top of Desktop (A) with Control Panel (K) and secure both
using M5x16mm Screws (S-D) and a Phillips screwdriver.
HS-D
A
A
K
S-D

7
STEP 7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
Connect the AC Adapter (J) and Leg Motor (I) to Control Panel (K), then plug AC Adapter (J) into a wall
outlet to power on the desk for operation. Organize cables using the Cable Clips (M). Press and hold the
up or down arrows on Control Panel (K) until the desk reaches the desired height. To reset the desk,
unplug AC Adapter (J) for at least ve seonds. Plug AC Adapted (J) back in and press the down arrow
until the desk reaches the lowest position and then raises approximately .5". The desk will beep twice,
then release the down arrow.
J
I
K
M

LAST UPDATED: 03/16/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303