Vivo MOUNT-TV01LB User manual

Loft Bed TV Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-tv01lb
SKU: MOUNT-TV01LB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
44lbs
(20kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Hanger
B (x1)
VESA Plate
C (x4)
VESA Brackets
D (x2)
Pads
S-A (x2)
Clamp Screw
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot
be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate
use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-B (x2)
Screw Cap
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-C (x7)
M6 Nut
S-D (x4)
M6x12mm
Carriage Bolt
M-B (x4)
M8x16mm Screw
M-C (x4)
M6x30mm Screw
M-A (x4)
M6x14mm Screw
M-D (x4)
M8x35mm Screw
M-E (x4)
M8 Washer
M-F (x4)
Small Spacer
M-G (x4)
Large Spacer
T-A (x1)
Wrench

3
ASSEMBLY STEPS
STEP 1
Assemble VESA Brackets (C) to VESA Plate (B) in the appropriate configuration to fit your TV’s VESA
pattern using M6x12mm Carriage Bolts (S-D) and M6 Nuts (S-C). Tighten using Wrench (T-A).
NOTE: For 200x200mm and lower, do not use VESA Brackets (C).
300x300mm, 400x400mm
400x200mm, 300x400mm
400x300mm
C
B
S-D
S-C
T-A

4
OPTION A: Flat Back Monitor
For flat back monitors, assemble VESA Plate (B) with VESA Brackets (C) using M6x14mm
Screws (M-A) or M8x16mm Screws (M-B) with M8 Washers (M-E) and a Phillips screwdriver.
STEP 2
OPTION B: Curved Back Monitor
For curved back monitors, assemble VESA Plate (B) with VESA Brackets (C) using M6x30mm Screws
(M-C) or M8x35mm Screws (M-D) with M8 Washers (M-E) and Spacers (M-F and/or M-G). Tighten using a
Phillips screwdriver.
BC
M-A
M-B
M-E
M-E M-E
M-D
M-E
M-D
M-E
M-F
M-G
M-G
BC

5
STEP 3
Place Hanger (A) onto VESA Plate (B) at the desired height.
A
B

6
STEP 4
Assemble Hanger (A) to VESA Plate (B) using M6 Nuts (S-C) and Wrench (T-A).
STEP 5
A
B
S-C T-A
Thread Clamp Screws (S-A) into Hanger (A). Place Screw Caps (S-B) on the ends of Clamp Screws (S-A).
OPTIONAL: Pads (D) have been provided for mounting locations where Hanger (A) will touch or
rest against a hard surface when mounted. Peel and remove backing from Pads (D) and install on
back of Hanger (A) above both sets of screws, as shown above.
S-A
D
S-B
A

7
STEP 6
Place Hanger (A) over lo bed frame and tighten Clamp Screws (S-A) to secure the assembly in place.
NOTE: Max clamping thickness is 1.25” (32mm).
A
S-A
Lo Bed Frame Lo Bed Frame

LAST UPDATED: 06/13/2023
REV1.1
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303