Vivo STAND-TV00M4 User manual

Bolt-Down TV Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv00m4
SKU: STAND-TV00M4
[email protected]om www.vivo-us.com 309-278-5303

2
PACKAGE CONTENTS
TOOLS NEEDED
110lbs
(49.90g)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
M-F (x4)
Square Washer
M-G (x8)
Small Spacer
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-C (x4)
M6x30
M-D (x4)
M8x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
A (x1)
Pole
B(x2)
VESA Plate
C(x2)
Stopper
D(x1)
TV Plate
E (x4)
M6x16
J(x1)
Allen Wrench
G (x4)
M6x25
H (x4)
M6x30
I (x1)
Wrench
F (x4)
M6 Nut
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
M-H (x8)
Large Spacer
Drill
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
STEP 2
Position the pole on the desktop and drill small pilot holes. Secure M6x25 screws (G) or
M6x30 screws (H) and slide the base cover down.
Please note that the cable holes are positioned on the back side of the pole (A). Slide the base cover
up to reveal mounting holes on the base.

4
STEP 3
OPTION A: Flat Back Monitor
Position the VESA plate (B) on the back of the
TV, making sure the hooks are towards the top
of the TV. Secure using screws (M-A or M-B) with
square washers (M-F).
STEP 4
Attach TV plate (D) to mounting head on pole using M6x16 carriage bolts (E) and M6 nuts (F), and
tighten with the wrench (I).

5
STEP 5
Hang TV with VESA plate (B) over TV Plate (D)
and tighten the screws underneath to secure.
STEP 4 (Continued)
OPTION B: Curved Back Monitor
Position the VESA brackets (B) on the back
of the TV, making sure the hooks are towards
the top of the TV. Secure using screws (M-C,
M-D, or M-E) with square washers (M-F) and
spacers (M-G, M-H).

6
STEP 6
Install stoppers (C) on the TV plate (D) to prevent the TV from sliding.

7
STEP 7
Adjust swivel tension using the Allen wrench (J). Manage cables using cable holes in pole.

LAST UPDATED: 11/29/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M