Vivo STAND-TV02PW User manual

White Mobile Portrait to Landscape TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv02pw
[email protected]om www.vivo-us.com 309-278-5303
SKU: STAND-TV02PW

2
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B(x4)
Caster
C(x2)
Base Pole
I (x1)
Rear Cover
J x2)
VESA
Extension
K(x2)
VESA
Extension
L (x4)
Cable Cover
H(x1)
Mounting
Plate
D (x2)
Upper Pole
E (x1)
Equipment
Shelf
F (x2)
Shelf Mounting
Bracket
G (x1)
Front Cover
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
N (x8)
M6x8
M(x8)
M8x20
O x16)
M6x12
V (x1)
4mm Allen
Wrench
W(x1)
5mm Allen
Wrench
T (x1)
6mm Wrench
M-A (x4)
M5x14
S (x5)
Cable Tie
M-B (x4)
M6x14
M-C (x4)
M6x30
M-D (x4)
M8x30
M-E (x4)
M8x50
M-G (x8)
5mm Spacer
M-H (x8)
15mm Spacer
P x1)
M6x18
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
154lbs
(70kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury. 11 lbs
(5 kg)
TV DVD SHELF
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
M-F (x4)
Washer
Q(x8)
M8x8
R (x5)
Cable Tie
Holder
U (x1)
10mm Wrench

3
ASSEMBLY STEPS
STEP 1
Press the lock on each caster (B) to the down (locked) position, then install the casters to the base (A).
Adjust to sit flat if needed, then tighten each caster using the 10mm wrench (U).
TOOLS NEEDED
Phillips
Screwdriver
Wrench
STEP 2
Slide the base poles (C) into the base, making
sure the cable holes are facing towards the
back, then secure the poles using x4 M8x20
bolts (M). Turn the bolts using the 5mm Allen
wrench (W), but do not yet tighten.
Needle Nose
Pliers
STEP 3
Slide the shelf mounting brackets (F) onto
the base poles. Insert the upper poles (D)
into the base poles, making sure the cable
holes are facing in towards the center, then
secure the poles using x8 M6x8 bolts (N).
Tighten with the 4mm Allen wrench (V).

4
STEP 4
Slide the shelf mounting
brackets up to cover the
installed bolts, then insert
x4 M6x12 bolts (O) to secure
the brackets. Tighten with a
Phillips screwdriver.
STEP 5
1. Install the front cover (G)
between the poles, making
sure the face of the cover is
facing towards the front, and
secure using x4 M6x12 bolts
(O). Tighten with a Phillips
screwdriver.
2. Place the equipment shelf (E)
on the shelf mounting brackets,
making sure the large end faces
towards the back.
3. Secure the shelf using x4
M6x12 bolts (O) and tighten
with a Phillips screwdriver.
4. Tighten the previously
installed M8x20 bolts under
the base using the 5mm Allen
wrench (W).
STEP 6
OPTION A: VESA 200x200mm -
400x400mm
Install the mounting plate (H) to the
TV. For flat back TVs, use shorter
screws (M-A, M-B) with washers
(M-F). For curved or recessed back
TVs, use longer screws (M-C, M-D,
M-E) with washers (M-F) and spacers
(M-G, M-H) as needed.

5
STEP 6 (Continued)
OPTION B: VESA 600x200mm - 600x400mm
Attach VESA extensions (J, K) to the
mounting plate (H) using M8x8 bolts (Q),
and tighten with the 5mm Allen wrench (W).
Install the assembled mounting plate to the
TV. For flat back TVs, use shorter screws (M-
A, M-B) with washers (M-F). For curved or
recessed back TVs, use longer screws (M-C,
M-D, M-E) with washers (M-F) and spacers
(M-G, M-H) as needed.
STEP 7
Partially insert x2 M8x20
bolts (M) into the top hole
on each upper pole, leaving
10mm (about 3/8”) of thread
exposed. Hang the slots of the
mounting plate with TV over
the bolts.

6
Insert x2 M8x20 bolts (M) into either the front or rear lower holes of the mounting plate. Tighten all
bolts with the 5mm Allen wrench (W).
STEP 8
To adjust the ease of
rotation, loosen or tighten
the nuts on the back of the
mounting plate using the
6mm wrench (T).
STEP 9
To lock the position, insert the M6x18 bolt (P) into the back of the mounting plate using a
Phillips screwdriver. Use the side hole for portrait, or the top hole for landscape.
STEP 10
Route cables through the cable holes in the poles and the openings in the front cover and mounting
plate. Stick adhesive cable tie holders (R) onto the back of the mounting plate in the positions shown.
Pull excess cable up into the mounting plate area, making sure there’s enough slack for free rotation of
the TV if needed, and secure to the tie holders on the side using cable ties (S).
STEP 11

7
STEP 11 (Continued)
Place a power strip in the back of the
mounting plate, and secure using
cable ties.
STEP 12
Install cable covers (L) to the cables holes
in the poles, using pliers to break out
sections for x2 or x3 cables if needed.
STEP 13
Place the rear cover (I) onto the back of the mounting plate and secure using x4 M6x8mm
bolts. Tighten with a Phillips screwdriver. Unlock the casters to freely roll the assembled
cart.

LAST UPDATED: 12/02/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M