Vivo MOUNT-M-MM070R User manual

Mechanical Spring Recessed Fireplace TV Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-m-mm070r
SKU: MOUNT-M-MM070R
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
29-73lbs
(13-33kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
A (x1)
Housing
B(x2)
Housing Mounting
Bracket
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
C(x1)
Arm Mounting
Plate
D (x1)
Arm
E (x1)
TV Plate
J (x1)
Plate Cover
F(x2)
VESA Bracket
S-A (x4)
M8x12mm
Screw
S-B (x3)
M8 Plastic
Washer
S-C (x7)
M8 Metal
Washer
S-D (x7)
M8 Nut
S-E (x4)
ST3x6mm
Screw
S-F (x2)
M6x10mm
Screw
S-G (x2)
M6x20mm
Screw
S-H (x4)
M6 Washer
M-C (x4)
M6x30mm
Screw
W-B (x6)
Concrete
Anchor
W-C (x6)
Large M8
Washer
T-A (x1)
5mm Allen
Wrench
T-B (x1)
Rachet
T-C (x1)
10mm Socket
T-D (x1)
Wrench
T-E (x1)
13mm Socket
M-D (x4)
M8x35mm
Screw
M-E (x4)
Small M8
Washer
M-F (x4)
Small Spacer
M-G (x4)
Large Spacer
W-A (x6)
ST8x60mm
Screw
TOOLS NEEDED
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER
3 YEARS. ADULT SUPERVISION IS REQUIRED.
G(x1)
Handle Support
H(x1)
Handle
I(x6)
Bracket Cover
S-I (x4)
M8x16mm
Screw
S-J (x4)
M8x18mm
Screw
M-A (x4)
M6x14mm
Screw
M-B (x4)
M8x16mm
Screw
Stud Finder
Tape Measure Drill Phillips
Screwdriver
Pencil 6mm Drill
Bit 10mm Socket
Socket
Wrench

3
ASSEMBLY STEPS
STEP 1
To ensure the mount will clear the front of mantel, use
the chart below to determine the mounting height.
Measure the depth of your mantel, find the closest range
in column 1 below, then use column 2 to determine
your Mounting Height. Note: Ensure that the edge of the
mantel does not exceed 110°F (43°C).
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting hardware for brick and concrete walls. If unsure, please contact us at
vivo-us.com, email at [e-mail], or call us at 309-278-5303.
1. Mantel
Depth
2. Mounting
Height
< 30mm/ 1.2” > 30mm/1.2”
< 200mm/ 7.87” > 140mm/5.51”
< 250mm/9.84” > 170mm/6.69”
< 300mm/11.81” > 200mm/7.87”
< 350mm/13.78” > 250mm/9.84”
2. Mounting Height
1. Mantel Depth
With the Required Mounting Height (2) measurement , use a stud finder and a level to mark the
pilot hole locations for the lower Housing Mounting Bracket (B). Mark the upper Housing Mounting
Bracket (B) 29.9” (760mm) above the lower holes. Use of a stud finder and level is recommended.
Drill out marked holes 2.4” (60mm) deep using a 1/4” (6mm) drill bit.
Hold Housing (A) in between Housing Mounting Bracket (B) locations. The vertical position should
be centered between Housing Mounting Bracket (B) holes previously drilled. With the back side
touching the wall, trace the perimeter of Housing (A) using a level and a pencil. Cut and remove the
drywall section.
1
2
B
B
Note: Ensure there is enough
ceiling clearance for your TV size.

4
STEP 2
Install Plate Cover (J) to TV Plate (E) using ST3x6mm Screws (S-E) and a Phillips screwdriver.
Attach Arm Mounting Plate (C) to Arm (D) using M8x12mm Screws (S-A) and 5mm Allen Wrench
(T-A). Connect TV Plate (E) to threaded bolts on Arm (D) using M8 Plastic Washers (S-B), M8 Metal
Washers (S-C), M8 Nuts (S-D) and Wrench (T-D).
D
C
S-A
T-A
S-D
T-D E
S-CS-C
S-B
D
J
ES-E
E
STEP 4
Secure Housing (A) to arm assembly using M8x18mm Screws (S-J), M8 Metal Washers (S-C), and 5mm
Allen Wrench (T-A).
A
S-J
T-A
S-C
STEP 3

5
STEP 5
Connect Housing Mounting Brackets (B) to Housing (A) using M8x16mm Screws (S-I), M8 Nuts (S-D),
13mm Socket (T-E), Ratchet (T-B), and 5mm Allen Wrench (T-A).
B
A
S-D
S-I
T-A
STEP 6
Secure Housing Mounting Brackets (B) with assembly to previously pre-drilled holes using
ST8x60mm Screws (W-A), Large M8 Washers (W-C), 13mm Socket (T-E) with Ratchet (T-B). Place
Bracket Covers (I) over Housing Mounting Brackets (B).
Please Note: Concrete Anchors (W-B) are provided
in custom installation brick/concrete walls.
B
I
STEP 7
Secure VESA Brackets (F) to back of TV using appropriate Screws (M-A through M-D), Small M8
Washers (M-E), Spacers (M-F, M-G), and a Phillips screwdriver.
F
W-A
W-C
T-B
T-E
T-B
T-E

6
STEP 8
STEP 9
Attach Handle Support (G) to VESA Brackets (F) using M6x20mm Screws (S-G), M6 Washer (S-H), and
5mm Allen Wrench (T-A). Secure Handle (H) to Handle Support (G) using M6x10mm Screws (S-F) and
M6 Washers (S-H). Partially secure using 5mm Allen Wrench. Slide Bracket forward and fully tighten
screws.
Level mount assembly and insert 5mm Allen Wrench (T-A) into the of the end of Arm (D) to lock it in
place. Remove Nuts (F1) from the back of VESA Brackets (F) using Wrench (T-D) and open the latches.
Hang VESA Brackets (F) over TV Plate (E) and secure the latches using Nuts (F1) and Wrench (T-D).
F
H
S-H
S-G
S-F
S-H
T-A
G
T-A
T-A
D
F1
F
T-D
E

7
STEP 11
STEP 10
Assemble 10mm Socket (T-C) to Ratchet (T-B). Insert 10mm Socket (T-C) into the adjustment screw on
the front of Arm (D). Tighten the adjustment screw using Ratchet (T-B) to set the the indicator to the
correct position based on the weight of the TV.
Organize cables using the cable clips located under Arm (D). Remove 5mm Allen Wrench (T-A) from
Arm (D) and adjust the TV as desired.
WARNING:
To avoid injury, never
place hand or any object
into the mount’s structure.
D
D
T-B
T-C
T-A

LAST UPDATED: 12/02/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303