Vivo STAND V006 User manual

Hex Monitor Desk Mount
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: STAND V006
Tools Required:
phillips screwdriver
Package Contents
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
a (x1)
Pole
b (x1)
Clamp
c (x2)
Arm Assembly
d (x24)
M4x12
e (x24)
M4x30
(x48)
M4 Washer
g (x24)
M4 Spacer
h (x4)
M8x10
i (x2)
M10x15
j (x1)
Allen Key
k (x2)
Spare Plast c
Cover
- -https://vivo us.com/products/stand v006
l (x1)
Wrench

Assembly Steps
2
Step 1: Install the “C” Clamp According to the
Desktop Thickness
Attach pole (a) to clamp (b) at desired height with screws (i) and Allen
wrench (j). Secure clamp to desk.
Step 2: Install Arm to the Tube Support
Attach arm assembly (c) to the pole (a) with screws (h) at desired
height, making sure the cable clips are facing down. Repeat for
second arm assembly.

Step 4: Managing the Wires and Adjusting the
Turning Tension
Manage cables using the cable clips. Cables on top arm assembly can
be passed through the top of the pole and out the rear cable hole
below.
To adjust swivel joint tension, remove the plastic cover and turn the
bolt underneath with the Allen key (j).
Step 3: Mounting the Monitor to VESA Plate
Option A: Flat Back Monitor
Mount monitors to VESA plates using thumbscrews (d) and washers
(f). Do not overtighten; thumbscrews only need to be finger-tight.
Option B: Curved Back Monitor
For curved back monitors use screws (e), washers (f), and spacers (g).
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Sa ety Warning
Contact us at:
Last updated: 06/04/18
Step 5: Fix the Tilt Angle and Adjust the Level o
the Monitors
To adjust tilt support, remove the plastic cover and turn the nut
underneath with the wrench (l).
Turn the bolt counterclockwise to lower the center monitor, turn the
bolt clockwise to raise the center monitor.
4