WatchGas Compliance Kiosk User manual

Compliance
Kiosk
Quick Start Guide
Compliance Kiosk | QSG | V 1.0 | EN | 26-06-23

2
WARNING
IMPORTANT SAFETY INFORMATION:
READ FIRST
• To ensure personal safety, read Safety Information and
Warnings before using the Compliance Kiosk.
• Use the Compliance Kiosk only as specied by the man-
ufacturer. Failure to do so may impair the protection pro-
vided by the Compliance Kiosk. The safety and security
of any system or network incorporating the Compliance
Kiosk and its accessory components is the responsibility
of the assembler of the system.
• Follow all required National Electric Codes (NEC) and
safety codes.
• Do not attempt to adjust, disassemble, or service the
equipment.
• Only use the supplied charging adapter, USB C 5V charger
15 Watt.
CAUTIONS & BEST PRACTICES
• If the Compliance Kiosk appears to be damaged or is not
functioning properly, please contact WatchGas or a local
WatchGas distributor.
• Avoid the station encountering liquids. Compliance Kiosk
cannot be mounted in an outdoor location that could be
exposed to rain or wet conditions.
• Compliance Kiosk has no hazardous location approvals
and can only be used in a safe and non-hazardous envi-
ronment known to be free of toxic and/or ammable gas.
• Servicing can only be carried out by a WatchGas ofce or
trained service technician.
• The warranty does not cover electrical surges, physical
and/or water damages.

3
INTRODUCTION
The WatchGas Compliance Kiosk works as a terminal to allow the user to check-in the gas detector
and provides a full overview of the device status including any unreported events. The WatchGas
compliance Kiosk automatically sends all data to a designated software site, providing a cost
effective overview of eet health, predictive maintenance, events and alarms.
Furthermore the WatchGas Compliance Kiosk provides the capability to actively manage detector
settings and user assignments.
COMPLIANCE KIOSK
OVERVIEW
1. Touch screen
2. Power supply
3. Touch screen ON/OFF
4. Instruction Label
5. Detector inset location
6. Mounting bracket table /
wall mount
1
2
3
4
5
6
PREPARE FOR USE
• Ensure WatchGas software “Site Unique ID” that has been provided.
• Ensure internet connectivity either by WIFI or installing a SIM for Cellular connection.

4
MOUNTING THE COMPLIANCE KIOSK
The WatchGas Compliance Kiosk is intended for wall mount or on a stand.
Ensure the power cable is fastened in order to avoid damaging it and potential trip hazards.
See drawings below.
Wall Mounting
The provided mounting brackets can be used to mount the Compliance Kiosk to a wall or
table. WatchGas recommends checking the strength of the mounting area and selecting the proper
mounting hardware before mounting the Compliance Kiosk. Mounting the Compliance Kiosk should
be performed by a qualied installation contractor.
Compliance Kiosk on a wall Compliance Kiosk on a table Installing the brackets

5
ENTER SET UP
Click upper left icon and
enter password.
Setup Menu Saved Conguration Files:
Setting up reference les
to compare gas detectors
against.
Select Unit type and
model.

6
File Function
To set the le for use
for compliance and the
settings required in the
detector such as alarm
level and functions.
Event Log Menu
Shows all units checked
in event list.
Compliance Reader Setup
To enable the software
activation, enter the Site
Unique ID to connect the
account’s specic site.
This number is provided
with the software solution
purchase.
Application Seing
Flush Application Data cleans unneeded
data after 30 days.
Assign Check Function: if the gas
detector does not have an User ID the
App will require you to enter one.
Unassign Site ID: To be used in Device
link mode.
Send GPS – not utilized.
Change password option.

7
HOW TO USE
Activate the NFC.
Activate the NFC on the detector.
Tap the detector to the Compliance Kiosk by means
of inserting in the clip holder.
Follow the Compliance
Kiosk screen for actions.
Note the action here.
After conrming if
needed.
Exit the compliance
check.
INSERTING
THE DETECTOR
Step 1
Power on the gas detector if re-
quired, if it is a 2- or 3-year SST1,
then the device will already be
activated. Turn on NFC.
Step 2
Switch on the Compliance Kiosk
NFC.
Step 3
Tap the unit and allow time for
data transfer.
Step 4
Conrm any actions needed.
Step 5
Exit the compliance check.

8
SPECIFICATIONS
Dimensions (LxWxH) 28 x 21 x 4 cm (11 x 8.25 x 1.5 in)
Weight 800 g (1.76 lb)
Operating Temperature +5-40 °C (40-104°F)
Humidity 10% to 90% RH
Storage Temperature 0-50 °C (32-120°F)
Power Supply USB C 5V
Real Time Clock Yes, updatable
Data Storage More than 1 year of operation
Connection capability Wi-Fi, Cellular, BLE – Connected into the RTR COMPLIANCE WATCH
Testing Function Device status
Device Compatibility One module compatible with SST Range
Warranty 2 Year warranty

9
WARNING
NO USER-SERVICEABLE PARTS INSIDE
MAINTENANCE
The best practices for maintenance are to perform routine rmware updates. The WatchGas Com-
pliance Kiosk can be cleaned with a soft, damp cloth. Do not use solvents, soaps, polishes, or
immerse the WatchGas Compliance Kiosk in liquids. Completely turn off unit and disconnect power
supply before cleaning.
WARNING
ONLY USE ORIGINAL WATCHGAS PARTS AND/OR ACCESSORIES
PARTS AND ACCESSORIES
Serviceable parts and accessories are sold separately. Please contact WatchGas or an authorized
distributor, or visit the website at www.watchgas.com or www.watchgasusa.com if in North America.
Parts list:
• On/OFF key
• Power supply
• USB power cable
• Allen wrench
• Mounting kit
• QC Card
• Quick Start Guide

10
TROUBLESHOOTING
Server connectivity:
1. Check internet connectivity.
2. Check Compliance software is active.
3. Check the rmware is updated.
Detector not connecting:
1. Redo the test.
2. Verify NFC is enabled on the detector.
3. Test a known functional detector in the station to verify station function.
Station fail:
1. Clear fault and retry.
2. Contact service representative.
CONTACT INFORMATION
Klaverbaan 121, 2908 KD, Capelle a/d IJssel, the Netherlands
[e-mail] | www.watchgas.com
313 N. State Hwy 342, Red Oak, Texas 75154, United States
[e-mail] | www.watchgasusa.com
Compliance Kiosk | QSG | V 1.0 | EN | 26-06-23 © 2023 WatchGas B.V.
WatchGas is dedicated to continuously improving its products. Therefore, the specications and features mentioned in this QSG are subject to change without prior notice.