WEG SSW06 User manual

Quick Start Guide
SSW06
g25 to 150HP (85 to 365A) 230V
g50 to 300HP (85 to 365A) 460V
g75 to 365HP (85 to 365A) 575V
Motors | Automation | Energy | Coatings
QS003SSW06

Power Connections and Keypad Operation:

Basic Wiring:

Start-up by Voltage Ramp

3 Wire Start/Stop (Remote Mode):

Parameters Exampels:

SOFT STARTER
ADVANTAGES – A Dual Readout Digital Copy
Keypad allows maximum ease of operation by
providing a high visibility red LED display and a 2-line
by 16-character alpha-numeric display that virtually
eliminates the need for an instruction manual during
set-up and operation. The alpha-numeric readout can
display in English, Spanish, German or Portuguese. The
copy keypad function allows the storage of two unique
sets of User Parameters for easy recall. This can
also be used to download these parameters to other
SSW06’s for easy set-up and “cloning” of multiple soft
starters.
“Oriented Start-Up” is a WEG exclusive
advantage that simplifies the initial start-up of the
SSW06. The SSW06 asks for operational and motor
information via the keypad, thereby assuring correct
operation and the motor overload protection is setup
accurately.
The Built-in Bypass Contactor will automatically
put the AC motor “across-the-line” once the SSW06
has smoothly accelerated the motor up-to-speed. The
bypass contactor will minimize power losses and heat
dissipation by removing the SCR’s from the motor
control and also provide energy savings and a smaller
overall soft starter package. The user can mount the
SSW06 inside of a more protective enclosure, NEMA1,
NEMA3R, NEMA12, NEMA4 and NEMA4X with minimal
cooling requirements.
Universal Source Voltage allows a single unit to
be used in applications with voltages ranging from 220
to 575V AC three phase, 50/60Hz. The appropriate soft
starter would be selected by the full load Amps of the AC
motor.