Weslo Momentum 800 Elliptical User manual

CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manu-
al for future reference.
Model No. WLEVEL2485.0
Serial No.
www.iconeurope.com
Visit our website at
USER’S MANUAL
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if there are missing
or damaged parts, please call:
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
email: [email protected]
08457 089 009

TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
2
IMPORTANT PRECAUTIONS
WARNING:To reduce the risk of serious injury, read the following important precau-
tions before using the elliptical exerciser.
1. Read all instructions in this manual and all
warnings on the elliptical exerciser before
using the elliptical exerciser.
2. Use the elliptical exerciser only as described
in this manual.
3. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
4. The elliptical exerciser is intended for home
use only. Do not use the elliptical exerciser in
acommercial, rental, or institutional setting.
5. Keep the elliptical exerciser indoors, away
from moisture and dust. Place the elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet. Make
sure that there is enough clearance around
the elliptical exerciser to mount, dismount,
and use the elliptical exerciser.
6. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
7. Keep children under the age of 12 and pets
away from the elliptical exerciser at all times.
8. Wear appropriate clothes when exercising;
do not wear loose clothes that could become
caught on the elliptical exerciser. Always
wear athletic shoes for foot protection.
9. The elliptical exerciser should not be used by
persons weighing more than 115 kg (250
lbs.).
10.The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
11. Always keep your back straight when using
the elliptical exerciser; do not arch your back.
12. If you feel pain or dizziness whilst exercising,
stop immediately and cool down.
13. The elliptical exerciser does not have a free-
wheel; the pedals will continue to move until
the flywheel stops.
WARNING:Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health prob-
lems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.

3
BEFORE YOU BEGIN
Congratulations for selecting the new WESLO®
MOMENTUM 800 elliptical exerciser. The MOMEN-
TUM 800 is an incredibly smooth exerciser that
moves your feet in a natural elliptical path, minimizing
the impact on your knees and ankles. And the unique
MOMENTUM 800 features adjustable resistance and
asimple-to-use console to help you get the most from
your exercise.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
tions after reading this manual, see the front cover of
this manual. To help us assist you, please note the
product model number and serial number before call-
ing. The model number is WLEVEL2485.0. The serial
number can be found on a decal attached to the ellipti-
cal exerciser (see the front cover of this manual).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Handlebar
FRONT
BACK
Pedal Arm
Pedal Disk Pedal
Console
Pulse Bar
Resistance Knob
Awarning decal has been placed on the ellip-
tical exerciser.If the decal is missing or illeg-
ible, call the telephone number on the front
cover of this manual and order a free
replacement decal. Apply the decal in the
location shown.

4
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the
included hex keys and your own Phillips screwdriver , adjustable wrench , and
rubber mallet .
Use the drawings below to identify the small parts used for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 14. The number following the key number is
the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in
the parts bag, check to see if it has been pre-assembled.
M6 x 38mm Button
Bolt (50)–4
M4 x 16mm
Screw (42)–4
M10
Washer (35)–2
M10 Split
Washer (59)–2
M10 Nylon
Locknut (33)–6
Pedal Arm Bolt Set (40)–2
M10 x 25mm Patch Screw (22)–2
M10 x 75mm Carriage
Bolt (34)–4
M10 x 68mm Button
Bolt (48)–2
M6 x 48mm Flat Head
Screw (36)–4 M8 x 16mm Button
Screw (68)–2
M8 Split
Washer (69)–2
M6 Nylon
Locknut (27)–4 Wave Washer
(70)–2
1. Identify the Front Stabiliser (10), which is narrower than
the Rear Stabiliser (not shown). Whilst another person
lifts the front of the Frame (1), attach the Front
Stabiliser to the Frame with two M10 x 75mm Carriage
Bolts (34) and two M10 Nylon Locknuts (33).
10
33
34
1
1

5
2. Whilst another person lifts the back of the Frame (1),
attach the Rear Stabiliser (28) to the Frame with two
M10 x 75mm Carriage Bolts (34) and two M10 Nylon
Locknuts (33).
34
28
1
2
33
33
3. Whilst another person holds the Upright (2), remove
the indicated fasteners from the Pulse Bar (65) and the
Upright.
Slide the Pulse Bar (65) onto the indicated bracket on
the Upright (2). Attach the Pulse Bar with two M8 x
16mm Button Screws (68) and two M8 Split Washers
(69). Be careful to avoid pinching the wires.
365
2
68
Bracket
2
65
Fasteners
5. Whilst another person holds the Console (23) near the
Upright (2), connect the wires extending from the
Console to the Upper Wire (44) and the Pulse Wire
(64). Insert the excess wiring into the Upright.
Next, attach the Console (23) to the Upright (2) with
four M4 x 16mm Screws (42). Be careful to avoid
pinching the wires.
Turn the Resistance Knob (45) counterclockwise to
the lowest setting before going to the next step.
5
23
2
64
44
42 45
69
4. The Console (23) requires three “AA” batteries; alka-
line batteries are recommended. Insert three batteries
into the battery compartment. Make sure that the bat-
teries are oriented as shown by the diagram inside
the battery compartment.
23
Batteries
4

6
50
8
27
7. Identify the Left Handlebar (6), which is marked with a
sticker.Insert the Left Handlebar into one of the
Handlebar Arms (5); make sure that the Handlebar
Arm is turned so the hexagonal holes are on the
indicated side.Attach the Left Handlebar to the
Handlebar Arm with two M6 x 38mm Button Bolts (50)
and two M6 Nylon Locknuts (27). Make sure that the
Nylon Locknuts are inside of the hexagonal holes.
Do not fully tighten the Button Bolts yet.
Apply a small amount of the included grease to the left
axle on the Upright (2).
Make sure that there are two Small Handlebar
Bushings (49) in the Left Handlebar (6). Slide a
Handlebar Spacer (47) and the Left Handlebar onto the
left axle on the Upright (2) as shown. Make sure that the
Handlebar Spacer is turned so the curved side is fac-
ing the Upright. Tap an Axle Cap (14) onto the axle.
Repeat this step to assemble the Right Handlebar (8)
and the other Handlebar Arm (5).
Grease
7
47
14
49
5
2
5
6
836
11
13
8. Identify the Left Pedal Arm (11). Attach a Pedal (13) to
the Left Pedal Arm with two M6 x 48mm Flat Head
Screws (36).
Attach the other Pedal to the Right Pedal Arm (not
shown) in the same way.
Hexagonal
Holes
6
1
2
33
Make sure that
the wires and
cables do not
get pinched
and damaged
during this
step.
44
53
48
55
63
59
6. Whilst another person holds the Upright (2) near the
Frame (1), connect the Speed Wire (44) to the Reed
Switch Wire (53). Next, connect the Resistance Cable
(63) to the Lower Cable (55) in the following way:
•See drawing A. Pull up on the metal bracket on the
Lower Cable (55), and insert the tip of the
Resistance Cable (63) into the wire clip inside of the
metal bracket.
•See drawing B. Firmly pull the Resistance Cable
(63) and slide it into the metal bracket on the Lower
Cable (55) as shown.
•See drawing C. Using pliers, squeeze together the
prongs on the upper end of the metal bracket.
Push the excess cable and wire down into the Frame
(1). Slide the Upright (2) onto the Frame. Be careful
not to pinch the wires or cables. Attach the Upright
with two M10 x 68mm Button Bolts (48), two M10 Split
Washers (59), and two M10 Nylon Locknuts (33). Do
not tighten the Button Bolts yet.
55 55
Metal
Bracket
B
AC
55
63
63
63

7
10. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the ellip-
tical exerciser.
9. Apply a small amount of grease to the axle on the left
Disc Crossbar (16). Slide the Left Pedal Arm (11) and a
Wave Washer (70) onto the axle. Next, slide an M10
Washer (35) onto an M10 x 25mm Patch Screw (22),
and tighten the Patch Screw into the axle.
Apply a small amount of grease to a Pedal Arm Bolt
Set (40) and to the surfaces of the Large Handlebar
Bushings (60) in the left Handlebar Arm (5). Next, hold
the lower end of the left Handlebar Arm inside of the
bracket on the Left Pedal Arm (11). Attach the Left
Pedal Arm to the left Handlebar Arm with the Bolt Set.
Do not overtighten the Bolt Set; the Handlebar Arm
must pivot freely.
Attach the Right Pedal Arm (not shown) to the right
side of the elliptical exerciser in the same way.
See step 6. Tighten the M10 x 68mm Button Bolts (48)
in the Upright (2).
See step 7. Tighten the M6 x 38mm Button Bolts (50)
in the Handlebar Arms (5).
Grease
Grease
22 35
11
5
9
60 60
16
40
40 70

8
HOW TO USE THE ELLIPTICAL EXERCISER
HOW TO EXERCISE ON THE ELLIPTICAL
EXERCISER
To mount the elliptical exerciser, hold the handlebars or
the pulse bar and step onto the pedal that is in the
lowest position. Then, step onto the other pedal. Push
the pedals until they begin to move with a continuous
motion. Note: The pedal disks can turn in either
direction. It is recommended that you move the
pedal disks in the direction shown by the arrow;
however, for variety, you may turn the pedal disks
in the opposite direction.
To dismount the elliptical exerciser, wait until the ped-
als come to a complete stop. Note: The elliptical
exerciser does not have a free wheel; the pedals
will continue to move until the flywheel stops.
When the pedals are stationary, step off the highest
pedal first. Then, step off the lowest pedal.
HOW TO ADJUST THE PEDALING RESISTANCE
As you exercise,
you can adjust the
resistance of the
pedals with the
resistance knob on
the upright. To
increase the resis-
tance, turn the
knob clockwise; to
decrease the resis-
tance, turn the
knob counterclock-
wise.
Pedal Disk
Pedal
Handlebars
Pulse Bar
Resistance
Knob

9
FEATURES OF THE CONSOLE
The easy-to-use console features seven modes that
provide instant exercise feedback during your work-
outs. The modes are described below.
• Speed—This mode displays your pedalling speed,
in kilometres per hour or miles per hour.
• Time—This mode displays the elapsed time. Note:
If you stop pedalling for a few seconds, the time
mode will pause.
• Distance—This mode displays the distance you
have pedalled, in kilometres or miles.
• Calories—This mode displays the approximate
number of calories you have burned.
• Fat Calories—This mode displays the approximate
number of fat calories you have burned (see FAT
BURNING on page 13).
•Pulse—This mode displays your heart rate when
you use the pulse sensor.
•Scan—This mode displays the speed, time, dis-
tance, calories, fat calories, and pulse modes, for a
few seconds each, in a repeating cycle. Note: The
pulse mode will be displayed only when the pulse
sensor is being used.
HOW TO OPERATE THE CONSOLE
Make sure there are batteries in the console (see
BATTERY REPLACEMENT on page 11). If there is a
sheet of clear plastic on the console, remove it.
Follow the steps below to operate the console.
1. To turn on the console, press the ON/RESET but-
ton or begin pedalling. The entire display will briefly
appear; the console will then be ready for use.
2. Select one of the modes:
Scan mode—
When the power
is turned on, the
scan mode will be
selected automati-
cally. A mode indi-
cator will appear
below the word
SCAN to show
that the scan
mode is selected,
and a second mode indicator will show which
mode is currently displayed. Note: If you have
selected a different mode, repeatedly press the
MODE button to reselect the scan mode.
Speed, time, dis-
tance, calories,
or fat calories
mode—Toselect
one of these
modes for contin-
uous display,
repeatedly press
the MODE button.
The mode indicators will show which mode is
selected. Make sure there is not a mode indicator
below the word SCAN.
Toreset the display,press the ON/RESET button.
Note: The console can display speed and dis-
tance in either kilometres or miles. Tochange
the unit of measurement, press the ON/RESET
button for about five seconds. The letters km/h or
mph will appear in the display to show which unit of
measurement is selected. When the batteries are
replaced, it may be necessary to reselect the
desired unit of measurement.
Mode Indicators

10
3. Measure your heart rate if desired.
Ifthere are thin
sheets of plastic on
the metal contacts on
the handgrip pulse
sensor, peel off the
plastic. To measure
your heart rate, hold
the handgrip pulse
sensor, with your
palms resting against
the metal contacts. Avoid moving your hands or
gripping the contacts too tightly.
When your pulse
is detected, a
heart-shaped
symbol will flash
in the left side of
the display each
time your heart
beats, one or two
dashes will
appear,and then your heart rate will be shown. For
the most accurate heart rate reading, hold the con-
tacts for at least 15 seconds. Note: If you continue
to hold the handgrip pulse sensor, the display will
show your heart rate for up to 30 seconds. The dis-
play will then show your heart rate along with the
other modes.
Ifyour heart rate is not shown, make sure that your
hands are positioned as described. Be careful not
to move your hands excessively or to squeeze the
metal contacts too tightly. For optimal performance,
clean the metal contacts using a soft cloth; never
use alcohol, abrasives, or chemicals.
4. To turn off the console, simply wait for a few min-
utes. The console has an “auto-off” feature. If
the pedals are not moved and the console but-
tons are not pressed for a few minutes, the
power will turn off automatically to save the
batteries.
WARNING:The pulse sensor
is not a medical device. Various factors
may affect the accuracy of heart rate
readings. The pulse sensor is intended
only as an exercise aid in determining
heart rate trends in general.
Metal
Contacts

11
Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately.
To clean the elliptical exerciser, use a damp cloth and
asmall amount of mild soap. Important: Keep liq-
uids away from the console and keep the console
out of direct sunlight. During storage, remove the
batteries from the console.
BATTERY REPLACEMENT
If the console display becomes dim, the batteries
should be replaced; most console problems are the
result of low batteries. To replace the batteries, see
step 5 on page 5 and remove the console from the
upright. Next, see step 4 on page 5 and insert two
batteries into the console. Reattach the console to the
upright, being careful not to pinch the wires.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. Toadjust the reed
switch, you must first remove the Left Pedal Arm (11)
and the Left Side Shield (3).
Remove the Pedal Arm Bolt Set (40), the M10 x
25mm Patch Screw (22), the M10 Washer (35), and
the Wave Washer (70) from the Left Pedal Arm (11),
and remove the Left Pedal Arm. Next, remove the two
M4 x 25mm Screws (56) and the four M4 x 16mm
Screws (42) from the Left Side Shield (3), and remove
the Left Side Shield.
See the drawings below and locate the Reed Switch
(53). (Note: For clarity, the left Pedal Disc [15] is not
shown.) Loosen, but do not remove, the indicated M4 x
16mm Screw (42). Slide the Reed Switch slightly
toward or away from the Magnet (58) on the Flywheel
(17), and then retighten the Screw. Turn the Pedal
Discs for a moment. Repeat until the console displays
correct feedback. When the Reed Switch is correctly
adjusted, reattach the Left Side Shield (3) and the Left
Pedal Arm (11).
HOW TO ADJUST THE DRIVE BELT
If the pedals slip whilst you are pedaling, even when
the resistance is adjusted to the highest setting, the
Drive Belt (19) may need to be adjusted. To adjust the
Drive Belt, you must first remove the left side shield.
See HOW TO ADJUST THE REED SWITCH at the
left and remove the left side shield.
Next, loosen the
M8 x 22mm Flat
Head Screw (41)
and turn the
Idler Adjustment
Bolt (62) until
the Drive Belt
(19) is tight.
When the Drive
Belt is tight,
tighten the Flat
Head Screw.
Reattach the left
side shield and the left pedal arm.
MAINTENANCE AND TROUBLESHOOTING
42 56
42
42
22
3
40
41
62
19
11
42
53
58
16
70
35

12
HOW TO ADJUST THE RESISTANCE STRAP
Ifthe resistance knob is turned to the highest setting
and there is not enough pedaling resistance, the
resistance strap can be adjusted. To adjust the resis-
tance strap, first remove the left side shield (see HOW
TO ADJUST THE REED SWITCH on page 11).
Next, turn the resistance knob to the lowest setting.
Open the Strap Clamp (26) and pull the end of the
Resistance Strap (18) downward slightly. Close the
Strap Clamp and turn the Flywheel (17) to make sure
that there is not too much resistance.
When the resistance strap is properly adjusted, re-
attach the left side shield and the left pedal arm.
18
17
26

13
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age. The three numbers are your “training zone.”
The lowest number is the recommended heart rate for
fat burning, the middle number is the recommended
heart rate for maximum fat burning, and the highest
number is the recommended heart rate for aerobic
exercise.
Burning Fat
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible
carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored
fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber in your training zone as you exercise. For maxi-
mum fat burning, adjust the intensity of your exercise
until your heart rate is near the middle number in your
training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exer-
cise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
WORKOUT GUIDELINES
Each workout should include the following three parts:
Awarm-up,consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise,consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise pro-
gram, do not keep your heart rate in your training
zone for longer than 20 minutes.)
Acool-down,with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three work-
outs each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. Remember, the key to success is make exer-
cise a regular and enjoyable part of your everyday life.
WARNING:Before beginning
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.

14
Note: # indicates a non-illustrated part. Specifications are subject to change without notice.
Key No. Qty. Description Key No. Qty. Description
PART LIST—Model No. WLEVEL2485.0 R0905A
1 1 Frame
21 Upright
3 1 Left Side Shield
41 Right Side Shield
5 2 Handlebar Arm
6 1 Left Handlebar
7 1 Idler Assembly
8 1 Right Handlebar
9 1 Hook
10 1 Front Stabiliser
11 1 Left Pedal Arm
12 1 Right Pedal Arm
13 2 Pedal
14 2 Axle Cap
15 2 Pedal Disc
16 2 Disc Crossbar
17 1 Flywheel
18 1 Resistance Strap
19 1Drive Belt
20 1 Cable Clamp
21 4 Stabiliser Endcap
22 2 M10 x 25mm Patch Screw
23 1 Console
24 2 Handgrip
25 1 M6 x 18mm Bolt
26 1 Strap Clamp
27 5 M6 Nylon Locknut
28 1 Rear Stabiliser
29 2 Flywheel Bearing
30 2Large Snap Ring
31 2 Large Bearing
32 1 Pedal Axle
33 7M10 Nylon Locknut
34 4 M10 x 75mm Carriage Bolt
35 2 M10 Washer
36 4M6 x 48mm Flat Head Screw
37 2 Pedal Arm Bushing
38 1 M8 Nylon Locknut
39 2 M10 Small Washer
40 2 Pedal Arm Bolt Set
41 1 M8 x 22mm Flat Head Screw
42 15 M4 x 16mm Screw
44 1 Upper Wire
45 1 Resistance Knob/Cable
46 2 Pulse Bar Endcap
47 2 Handlebar Spacer
48 2 M10 x 68mm Button Bolt
49 4 Small Handlebar Bushing
50 4 M6 x 38mm Button Bolt
51 8 M6 x 35mm Button Screw
52 1 M4 x 16mm Flat Head Screw
53 1 Reed Switch/Wire
54 1 Cable Clamp
55 1 Lower Cable
56 2 M4 x 25mm Screw
57 1 Flywheel Axle
58 1 Magnet
59 2 M10 Split Washer
60 4 Large Handlebar Bushing
61 2 5/16” x 25.4mm Hex Bolt
62 1 Idler Adjustment Bolt
63 2 Handlebar Endcap
64 1 Pulse Wire
65 1 Pulse Bar
66 2 Pulse Sensor
67 2 Narrow Pedal Arm Bushing
68 2M8 x 16mm Button Screw
69 2 M8 Split Washer
70 2 Wave Washer
71 1M5 x 16mm Flat Head Screw
# 1 Allen Wrench
# 1 Grease
#1User’s Manual

EXPLODED DRAWING—Model No. WLEVEL2485.0 R0905A
15
8
4
3
42
42
5
47
42
23
44
45
24
6
47
5
60
48
33
17
21
34
57
10
39
12 35
67
51
15
19
16
61
61
16
62
1
30
31 32
38
33
51
51 15
13
67
35
11
40
40
33
7
52
59
59
58
27
50
50
27
60
60
2
49
49
49 49
42
42
42
42
42
21
60
51
51
41
54
42 53
33
37
37
40
40 13
28
21
21
33
33
34
30
31
55
63
63
14
14
36
36
29 29 9
18
20
26
22
22
56
39
27
25
42
64
66
46
46
68
65
69
70
70
71

Part No. 228709 R0905A Printed in China © 2005 ICON IP, Inc.
WESLO is a registered trademark of ICON IP, Inc.
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
Outside the UK: 0 (044) 113 387 7133
Fax: [phone]
Tohelp us assist you, please be prepared to give the following information:
•the MODEL NUMBER of the product (WLEVEL2485.0)
•the NAME of the product (WESLO MOMENTUM 800 elliptical exerciser)
•the SERIAL NUMBER of the product (see the front cover of this manual)
•the KEY NUMBER and DESCRIPTION of the part(s) (see page 14)
08457 089 009