Westin PRO TRAXX 6 User manual

1
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-216412-RevA ECO #: W18-0225 DATE: 03/14/19
INSTALLATION INSTRUCTIONS
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
11DRIVER STEP BAR ASSEMBLY 10MM SOCKET
21PASSENGER STEP BAR ASSEMBLY 10MM WRENCH
33DRIVER MOUNT BRACKET 13MM SOCKET
43PASSENGER MOUNT BRACKET 13MM WRENCH
56BRACKET COVER ALLEN WRENCH
612 M8 HEX HEAD BOLT (YELLOW ZINC) RATCHET
712 M8 SPLIT LOCK WASHER (YELLOW ZINC) TORQUE WRENCH
812 M8 FLAT WASHER (YELLOW ZINC)
912 M6 HEX HEAD CAP SCREW (YELLOW ZINC)
10 24 M6 FLAT WASHER (YELLOW ZINC)
11 12 M6 NYLOCK NUT (YELLOW ZINC)
12 12 M8 BUTTON HEAD BOLT (BLACK ZINC)
13 12 M8 FLAT WASHER (BLACK ZINC)
14 12 M8 TOOTHED WASHER (BLACK ZINC)
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
CONTENT
PRO TRAXX 6 OVAL STEP BAR
APPLICATION:
2019 Chevrolet Silverado/GMC Sierra 1500 Crew Cab & Double
Cab (Excl. 2019 Silverado LD/Sierra 1500 Limited)
PART NUMBER:
21-64130, 21-64135 (Crew Cab)
21-64120, 21-64125 (Double Cab)
ITEM 1 (Double Cab) ITEM 1 (Crew Cab)
ITEM 3 ITEM 4 ITEM 5
Passenger Side Opposite Passenger Side Opposite

2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-216412-RevA ECO #: W18-0225 DATE: 03/14/19
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
2. Starting on the driver side, remove the rubber plugs located on the rocker panel at each mounting location. See Figure 1.
3. For models with threaded holes: At each br acket mounting location on the r ocker panel there should be a welded
factory nut.
Fig. 1
4. Secure the Plastic Bracket Covers (item 5) to the Mounting Brackets using the supplied M6 Hardware. See Figure 2.
Fig. 2
9
10
11
5

3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-216412-RevA ECO #: W18-0225 DATE: 03/14/19
5. Locate (1) Mounting Bracket (Items 3,4) and loosely secure it to the rocker panel using the provided hardware: (2) M8 hex
head bolt, (2) M8 flat washer, and (2) M8 lock washer. See Figures 3, 4 and 5.
6. Repeat Step 5 for all remaining bracket mounting locations.
Other locations
similar
Front Driver
Side Shown
Fig. 3
3
6
7 8
Mounting Locations
Passenger Side Rocker Panel
Driver Side Opposite
Passenger Side Rocker Panel
Mounting Locations
Driver Side Opposite
CREW CAB
DOUBLE CAB
Front
Front
Fig. 5
Fig. 4

4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-216412-RevA ECO #: W18-0225 DATE: 03/14/19
7. Fasten step bars respectively to either side using the M8 hardware provided with the step bars. See Figure 6.
8. Align and adjust the step bars as needed and fully tighten all hardware. Torque all M6 fasteners to 5-7 ft-lbs and all M8
fasteners to 15-18 ft-lbs.
Fig. 6
12 14
13

5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-216412-RevA ECO #: W18-0225 DATE: 03/14/19
CARE INSTRUCTIONS
 REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
 STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
 GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER
INSTALLATION COMPLETE
Crew Cab Shown

6
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-216412-RevA ECO #: W18-0225 DATE: 03/14/19
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
WARNING
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION
AND SAFETY.
DRILLING:
Most Westin products do not require drilling for installation. If drilling is defined as required, use
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO
AVOID PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product.
User should never exceed the vehicle manufacturers maximum tow and weight rating regardless
of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL
AS VEHICLE DAMAGE.
FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING:
Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or
other reproductive harm. For more info go to www.p65warnings.ca.gov