Westin 58-41175 User manual

1
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N. 75-5841175-RevA ECO #: W18-0220 DATE: 02/25/19
INSTALLATION INSTRUCTIONS
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
1 2 SIDE POD ASSEMBLY (1 DRIVER, 1 PASSENGER) 10MM SOCKET
2 2 MESH SIDE COVERS (1 DRIVER, 1 PASSENGER) 10MM WRENCH
3 1 CENTER SECTION 13MM SOCKET
4 1 LED LIGHT BRACKET 13MM WRENCH
5 1 DRIVER MOUNTING BRACKET 16MM SOCKET
6 1 PASSENGER MOUNTING BRACKET 16MM WRENCH
7 1 PASSENGER SUPPORT BRACKET 18MM SOCKET
8 1 DRIVER SUPPORT BRACKET 19MM WRENCH
9 1 DRIVER SIDE STRAP RATCHET
10 2 PASSENGER SIDE STRAP TORQUE WRENCH
11 12 M6 BUTTON HEAD SCREW
12 12 M6 FLAT WASHER
13 12 M6 SERRATED FLANGE NUT
14 12 M6 LOCK WASHER
15 4 M8 FLAT WASHER
16 4 M8 LOCK WASHER
17 4 M8 SERRATED FLANGE NUT
18 4 M8 BUTTON HEAD BOLTS
19 12 M12 SERRATED FLANGE NUT
20 12 M12 HEX BOLT
21 14 M12 LOCK WASHER (2 BLACK ZINC)
22 28 M12 FLAT WASHER (4 BLACK ZINC)
23 4 M10 HEX HEAD BOLT
24 4 M10 SERRATED FLANGE NUT
25 4 M10 FLAT WASHER
26 2 M12 HEX NUT (BLACK ZINC)
27 2 M12 BUTTON HEAD BOLTS (BLACK ZINC)
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
CONTENT
PRO-MOD BUMPER
APPLICATION:
2017-2019 Ford F-250/350/450/550 Super Duty
PART NUMBER: 58-41175

2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N. 75-5841175-RevA ECO #: W18-0220 DATE: 02/25/19
ITEM 1 (Driver)
ITEM 4 ITEM 5 ITEM 6
ITEM 7 ITEM 8 ITEM 9 ITEM 10
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
ITEM 1 (Passenger) ITEM 2 (Driver)
ITEM 2 (Passenger) ITEM 3
2. Remove the license plate and bracket. On models with factory fog lights, unplug both lights. Release the wiring harness
from the clips attached to the back of the bumper, (Figures 1 & 2). Move harness away from bumper.
Lower frame
extension
Fig 1 Fig 2

3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N. 75-5841175-RevA ECO #: W18-0220 DATE: 02/25/19
3. Next, remove the plastic lower air dam from the bottom of the bumper, (Figure 3). Remove the outer bumper supports at-
taching the outer ends of the bumper to the sides of the frame, (Figure 4). Remove the plastic covers from the tow hooks to
uncover the bumper bolts, (Figure 5).
Fig 3
Fig 4
Fig 5
4. Place blocks or jack stands under the front bumper to support it during mounting bolt removal. Once the bumper has been
safely supported, remove the (8) factory bumper bolts, (Figure 6).
WARNING! Assistance is required to hold the bumper in place during bolt removal to prevent the bumper from fal-
ling. Carefully slide the bumper off over the tow hooks.
Fig 6
5. Remove the passenger/right side tow hook from the end of the frame, (Figure 7). Next, remove the (4) factory hex nuts,
lower frame extension and double bolt plates from the end of the frame, (Figures 2 & 7). Repeat for Driver Side.
Fig 7

4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N. 75-5841175-RevA ECO #: W18-0220 DATE: 02/25/19
6. Use the supplied M10 Hardware to attach each Side Pod Assembly (1,2) to the Center Section (3). See Figure 8.
7. Use the supplied M6 Hardware to attach the LED Brackets (4) to the center section. See Figure 9. Note: If installing an
LED Light Bar (sold separately), install it at this time.
Fig. 8
Driver Side Shown
8. Loosely install the bumper assembly to the Mounting Brackets (5,6) using the supplied M12 Hardware. See Figures 10,16.
Fig. 10
Driver Side Shown
Fig. 9
Driver Side Shown
4
3
11
14
12
13

5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N. 75-5841175-RevA ECO #: W18-0220 DATE: 02/25/19
9. Loosely install the Support Brackets (7,8) to the frame of the vehicle using the M12 hardware (black) . See Figure 11.
10. Loosely attach the Side Straps (9,10) to the Support Brackets (7,8) using the supplied M8 Hardware. See Figure 12.
Fig. 11
Item 7
Black M12 Hardware
Driver Side Shown Driver Side Shown
11. Attach the Mesh Side Covers (2) to the Bumper and Side Straps (9,10) using the supplied M6 Hardware. See Figures 13 &
14.
Fig. 14
Driver Side Shown
Fig. 12
Fig. 13
14
12
11

6
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N. 75-5841175-RevA ECO #: W18-0220 DATE: 02/25/19
Fig. 15
12. Align bumper as desired and torque all hardware as specified: M6 to 7 ft-lbs, M8 to 18 ft-lbs, M10 to 38 ft-lbs, M12 to
60 ft-lbs.
Fig. 16
Fig. 17

7
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N. 75-5841175-RevA ECO #: W18-0220 DATE: 02/25/19
CARE INSTRUCTIONS
 REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
 STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
 GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER
INSTALLATION COMPLETE
LED Lights, side pod light mounts and skid plate sold separately

8
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N. 75-5841175-RevA ECO #: W18-0220 DATE: 02/25/19
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
WARNING
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION
AND SAFETY.
DRILLING:
Most Westin products do not require drilling for installation. If drilling is defined as required, use
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO
AVOID PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product.
User should never exceed the vehicle manufacturers maximum tow and weight rating regardless
of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL
AS VEHICLE DAMAGE.
FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING:
Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or
other reproductive harm. For more info go to www.p65warnings.ca.gov