WilTec 62304 User manual

Operation Manual
Electric Blanket
62304
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

The information contained in this document may alter at any time without previous notice. It is prohib-
ited to copy or spread any parts of this document in any way without prior written allowance. ll rights
reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously
or placing your order via the webshop.
E-mail: [email protected]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. tten -
tion! To allow for a smooth execution of your complaint or return, it is important to contact our cus -
tomer service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [email protected]
Tel:[phone]
Fax: [phone]
© by WilTec Wildanger Technik GmbH Item 62304 Page 2
http://www.WilTec.de
http://www.aoyue.eu 03 2021-1
http://www.teichtip.de

Introduction
Thank you for purchasing this quality product. To ini ize the risk of injury we urge that our cli-
ents take so e basic safety precautions when using this device. Please read the operation in-
structions carefully and ake sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
Please ensure to read this operation manual carefully and completely in order to properly familiarise
yourself with the product and its functions. Only use this electric blanket and the functions listed within
this operation manual for the purpose they were intended for.
This device has to be operated with a voltage of 230=V.
Do not modify or perform repair work on the device. Repairs as well as the maintenance of
electric parts have to be performed by qualified experts.
Do not operate the device, if it should be damaged and instead replace it or have it be re-
paired by a qualified expert.
Do not operate the device, if it has fallen down, operates in an unusual manner, has been sub-
merged or overheated, has changed its colour or begun to deform.
Never leave the device unattended, if it is connected to the mains supply.
This device is not a toy. Keep it inaccessible to children and do not let them play with it.
Protect the device from high temperatures and keep it away from heat sources such as hot
surfaces, direct sunlight, and open fire. Further avoid contact with oil and sharp edges and do
not use it in the vicinity of ignition sources.
Do not use the device in flammable, explosive, or toxic environments.
Only use water with a maximum temperature of 30= and mild washing agents or washing℃
powders in order to clean the device.
lways disconnect the device from the mains supply, if it is not in use.
This product is intended for indoor use and must not be used outside.
Do not pull at the cable of the device and do not abuse it in order to lift or carry the device.
Make further sure that the cable is not bent or jammed and keep it away from sharp edges
and objects.
Do not use the device, if the power cord should show signs of damage or wear. Do not repair
damaged cables and instead have them replaced by a qualified expert.
Do not completely submerge the device in water or other liquids. Do not use the device in the
vicinity of water sources or environments with a high level of humidity.
lways make sure to turn the device off and disconnect it from the mains supply before clean-
ing or moving it.
Only use the product for its intended purpose.
The electric blanket can only function in combination with the power cord and control unit in-
cluded in the scope of delivery.
Keep the product away from sharp or pointy objects and do not attach pins or buttons to it.
Make sure that the control unit does not overheat. In order to avoid overheating, do not cover
it with cushions, blankets, or other objects.
Do not operate the device with wet hands and avoid exposure of the power plug to water or
high levels of moisture in order to minimise the risk of electric shock.
Before starting the electric blanket, make sure that it is not folded and do not fold it while it is
operating.
Do not use the device on infants or small children under 3=years of age. Due to them being un-
able to process heat, the device is life-threatening to them.
Children in the vicinity of the device have to be supervised by adults responsible for their
safety at all times .
Do not iron the product as the mixture of pressure and heat may damage internal circuits.
© by WilTec Wildanger Technik GmbH Item 62304 Page 3
http://www.WilTec.de
http://www.aoyue.eu 03 2021-1
http://www.teichtip.de

Control unit
Operation
Handling
•Connect the power plug of the device with the mains supply by using an appropriate socket-
outlet. If necessary, use a suitable extension cord in order to ensure that the cable is not
stained.
•Use the on-off switch in order to turn the device on and activate the display.
•Use the temperature control in order to choose and set the temperature level.
Temperature settings
Use the temperature control button in order to choose and set 1 of the 3 possible temperature settings.
The chosen setting as well as the heating status of the blanket are visible on the display. blinking
display thereby indicates that the electric blanket is heating up, while a permanent display indicates
that the device has reached the set temperature. Should the temperature of the device fall below the
set value, the device will automatically heat up again until the desired temperature is reached.
Timer
Keep the timer button pressed in order to set the operating time of the device, which will automatically
turn off once the timer has run out. This electric blanket offers 4 different timer settings: F (10=hours),
8=hours, 4=hours, and 2=hours. The remaining time is thereby always visible on the display of the
device.
© by WilTec Wildanger Technik GmbH Item 62304 Page 4
http://www.WilTec.de
http://www.aoyue.eu 03 2021-1
http://www.teichtip.de

Maintenance and cleaning
I portant: Before cleaning the device, always make sure to remove the control unit and the power
cord from the blanket. Do not wash the device inside the washing machine and do not use a tumble
drier in order to dry it!
The blanket has to be hand-washed. Use warm water with a maximum temperature of 30=℃
as well as mild washing agents or washing powder. First soak the blanket for about 5=min be-
fore then beginning to clean it. Make sure to thoroughly rinse the blanket with water, if wash-
ing agents or powders were used.
Hang the blanket after washing in order to allow it to dry. Do not use clothes-pegs in the vicin -
ity of the internal circuits as the pressure might damage them.
Do under no circumstances wring the blanket out as this will damage its internal circuits.
Make sure that the electric blanket has dried completely and returned to its original size before
the cable and control unit are reattached and the device is used again.
© by WilTec Wildanger Technik GmbH Item 62304 Page 5
http://www.WilTec.de
http://www.aoyue.eu 03 2021-1
http://www.teichtip.de

Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-
mented in the law related to electrical and electronic equipment and appliances.
ll WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registrated in the German registry E R under the
WEEE-registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European
Union and other European countries with a separate
collection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal house-
hold waste but must be disposed to a recycling collec-
tion point for electronic and electrical waste equip-
ment. By contributing to the correct disposal of this art-
icle you protect the environment and the health of your
fellow men. Environment and health are threatened by
inappropriate disposal.
Material recycling helps reduce the consumption of raw materials.
dditional information on recycling this article can be provided by your local community, municipal
waste disposal facilities or the store where you purchased the article.
ddress:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions
manual require the written permission of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH Item 62304 Page 6
http://www.WilTec.de
http://www.aoyue.eu 03 2021-1
http://www.teichtip.de