WilTec PAXTON User manual

User Guide
PAXTON
For more Information:
www.wiltec.hk
Model No.: WT-0071

Indicator Light
Night Light
Sensor
1

INTRODUCTION
Thanks for choosing PAXTON, the wise sensor. This
appliance is an electronic wireless communication system that
allows you detect movement in your baby’s room with your
Android smartphone via Bluetooth.
Please retain your original dated sales receipt for your records. For
warranty service of your Wiltec product, you will need to provide a
copy of your dated sales receipt to conrm warranty status.
Registration is not required for warranty coverage.
For product related questions, please contact the shop or agent
you purchased Wiltec product.
This User Guide provides you with all the information you need to
get the most from your product.
Please read the Safety Instructions on page 3 before you install
the units.
PACK CONTENTS
1 PAXTON baby monitor unit
1 Quick Start Guide
2

WARNING
- This equipment CANNOT IN ANY CIRCUMSTANCES REPLACE the
supervision of the baby by an adult.
- Always make sure that electrical appliances is kept out of
children’s reach.
- When not use the equipment, please unplug from the mains.
- The appliance’s range varies according to the obstacles it meets
(lie of the land, number of partition walls between the transmitter
and the receiver, the presence of metal structures, etc.).
- Please read all the instructions carefully before you use the
product.
- Keep the appliances well away from all sources of heat (maximum
40°C) and humidity.
- Check regularly that the product is working properly.
- Clean the appliance with a soft, dry cloth. Do not immerse it in
water or expose it to water drops or splashes.
- The product may become warm when the appliance is in use;
when you use them, make sure that the heat can disperse and do
not cover them.
- The appliance should not be dropped or subjected to violent
impacts.
- Use this appliance indoors only; do not use outdoors or expose it
to humidity or bad weather.
- Plug this appliance into a wall socket easily reachable by an adult
but out of reach of children.
- Do not cover the appliance with a cloth or other objects (re
hazard).
- Do not handle the appliance with moist or wet hands.
- In the case of failure do not try to open or repair the appliance
since it does not contain parts that can be repaired or replaced by
the user
3

WARNING
- Warning! This appliance is not a toy! Keep out of reach of
children. Always make sure that children do not play with the
appliance.
- Do not place sources of naked ames, such as lit candles, on the
appliance.
- To avoid all risk of electrocution, do not expose the appliance
to rain or damp conditions.
- The electricity supply switch should be easily accessible.
-Never use extension cords.
-Test this product and all its functions so that you are familiar with
it prior to actual use.
-Do not use the product near water.
-Do not touch the plug contacts with sharp or metal objects.
ATTENTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
PROTECTION OR ATTEMPT TO OPEN THE PRODUCT.
DO NOT WET THE PRODUCT.
DO NOT EXPOSE TO HUMIDITY OR ATTEMPT TO OPEN THEM.
THIS MAY BE A SOURCE OF DANGER AND SHALL VOID THE
WARRANTY.
4

SETTING UP PAXTON
PAXTON
Plug the PAXTON unit into the mains power wall socket. The
PAXTON will power on automatically, the Indicator light LED will
be ashing and the night light will be on for 15 seconds.
Then, the night light will be turned o if there is no motion
detected.
Smart Phone
Install the “Sensor” APP on your Android Device, which can be
found by scanning the QR code below.
NOTE: the“Sensor” APP support only Android Device with
Android 4.3 or above, If your device has system lower than that,
please update it to Android 4.4.2 or above.
5

SETTING UP PAXTON
Smartphone
Turn on Bluetooth on your smart phone and open the APP.
The APP will connect to the PAXTON automatically, if the PAXTON
is on and within the working range.
After successfully connected, the Indicator light LED on the
PAXTON will be steady on.
(If the Bluetooth function of mobile phone is not activated, the
APP will request to enable the Bluetooth.
Please select “YES”to activate the Bluetooth on smartphone.)
In the APP Main Menu, there is a ring whose color indicates the
current status of PAXTON:
- Red : No PAXTON is connected
- Green : The PAXTON is connected and ready to work
- Orange : There is motion detected and the night light of the
PAXTON is on.
(Only available in“Auto” mode)
6

APP CONTROL
Mode
1. Auto – slide the button to the “Auto” section, the night light will
automatically turn on, for 15 seconds, when PAXTON detects
movement.
2. Manual – user can turn on the night light by sliding the button
on the ring to “Manual” section.
3. O – the night light will be always o even motion detected.
i.e. motion detector is still active.
User can adjust brightness level by sliding the button on the ring
within the Auto and Manual section. The night light brightness
will be correspondent to the brightness of the blue color ring.
7

You can tap on“Vibrate” button to toggle between Vibrate/Sound/
Silent.
You can tap on the“History” button in the APP to review the event
log of the night light.
In Auto mode, the PAXTON will turn on the night light while
motion is detected.
A status bar notication and vibrate/sound alert will be sent to
smart phone at the same time.
APP CONTROL
8

APP CONTROL
In Auto mode, the PAXTON will turn on the night light while
motion is detected. A status bar notication and vibrate/sound
alert will be sent to smartphone at the same time.
9

TECHNICAL SPECIFICATION
PAXTON
Input: 100-240V ~ 50/60 Hz 0.2A
Transmission Frequency: 2400 - 2483.5MHz
Transmission power: 10dBm max
Declaration of Conformity
Hereby, Wiltec declares that Wise Sensor is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
The Declaration of Conformance for Wise Sensor is available
from:
www.wiltec.hk/DOC
10

Wiltec HK Company Limited
Model : WT-0071
Made in China
All rights reserved.