WMF 1200 S Configuration guide

33 2603 0010 1.0 01.2013
Cleaning instructions WMF1200S
Please refer to the User Manual.
Follow the overview of the cleaning interval schedule in the Care chapter in the
UserManual.
Prior to the first cleaning, read the User Manual, Care chapter.
For all automatic cleaning programs, the combi spout, the milk nozzle, and the milk hose
must be installed.
Call up the care programs
Access acare program without amessage having appeared on the display.
✻Touch
✻Touch until the desired program is displayed
✻Access the displayed program by pressing
Cleaning programs
Machine cleaning
1 2 3Standard 4Standard
cleaning
OK: P browse: -/+
switching off
OK: P browse: -/+
✻Access the displayed
program by pressing
The display shows the
individual steps that must
be completed.
empty drip tray
OK: P cancel: C
empty grounds cont.
OK: P cancel: C
✻Confirm with that
the drip tray and the
grounds container has
been emptied
Using standard cleaning
✻Continue with steps
3–6, standard
With Plug&Clean
✻Continue with steps
3–6, Plug&Clean
Soak combi spout
OK: P cancel: C
in cleaning solution
OK: P cancel: C
at least
OK: P cancel: C
once per day
OK: P cancel: C
✻Confirm with
milk hose
start: P cancel: C
in water
start: P cancel: C
✻Prepare 0.3l of clear,
cold drinking water for
the water rinsing
5Standard 6Standard 3Plug&Clean 4Plug&Clean
✻Place acollection
container with approx.
2litres capacity under
the combi spout
✻Touch
Rinsing starts.
milk system rinsing
in progress
The milk system is rinsed
using hot water.
Hot water is drained
through the combi spout.
✻Continue with Step 7
Caution.
Hot liquids in the
dispensing area.
Observe the Safety chapter.
After the rinse, some
hot water remains in the
milk hose.
Hold the open end of the
milk hose over the drip
tray so that the remaining
rinse water can run out.
✻Open left machine
door
✻Insert the milk hose
with the Plug&Clean
adapter into the
Plug&Clean socket
5Plug&Clean 6Plug&Clean 7 8 9
✻Turn the adapter in
the socket by ⅛turn,
clockwise, until it stops
P&C adapter locked
start: P cancel: C
in socket?
start: P cancel: C
Plug&Clean
in progress
✻Remove the adapter
from the Plug&Clean
socket after rinsing
insert tablet
into manual insert
✻Add acleaning tablet
and close the cover
start: P
✻Touch
Machine cleaning starts.
If choc beverages have
been dispensed, the
machine cleaning starts
with mixer rinsing.
cleaning in progress
time remain: 7 min
Duration approx.
7minutes.
A minute countdown timer
shows the time remaining
in the cleaning cycle.
your selection pls
08:15 09.01.2013
Care pad
select clean.program
browse: -/+

Milk system rinsing
1234
milk system rinsing
OK: P browse: -/+
✻Access the displayed
program by pressing
The display shows the
individual steps that must
be completed.
milk hose
start: P cancel: C
in water
start: P cancel: C
✻Place acollection
container with approx.
2litres capacity under
the combi spout
✻Touch
Rinsing starts.
milk system rinsing
in progress
The milk system is rinsed
using hot water.
Hot water is drained
through the combi spout.
Caution.
Hot liquids in the
dispensing area.
Observe the Safety chapter.
After the rinse, some
hot water remains in the
milk hose.
Hold the open end of the
milk hose over the drip
tray so that the remaining
rinse water can run out.
✻Prepare 0.3l of clear,
cold drinking water for
the water rinsing
Milk system cleaning Plug&Clean
12345
Plug&Clean
OK: P browse: -/+
✻Access the displayed
program by pressing
✻Open left machine
door
✻Insert the milk hose
with the Plug&Clean
adapter into the
Plug&Clean socket
✻Turn the adapter in
the socket by ⅛turn,
clockwise, until it stops
P&C adapter locked
start: P cancel: C
in socket?
start: P cancel: C
Plug&Clean
in progress
✻Remove the adapter
from the Plug&Clean
socket after rinsing
Mixer rinsing
123
mixer rinsing
OK: P browse: -/+
✻Access the displayed
program by pressing
mixer rinsing
start: P cancel: C
✻Touch
Mixer rinsing starts.
your selection pls
08:15 09.01.2013
After the mixer is rinsed,
the “Ready to operate”
display appears.
Manual combi spout cleaning at least 1x daily Prior to cleaning switch off using the ON/OFF button. Disconnect mains plug.
A B
Caution.
Carefully disconnect
themilk hose.
✻Pull forward the lever behind
the combi spout
✻Remove combi spout
✻Remove milk hose from milk
container and release from
combi spout
If amixer is fitted:
✻Release the mixer hose
wUser Manual
✻Mix 5ml of WMFSpecial
cleaner with 0.5l of lukewarm
water
✻Dismantle combi spout
✻Immerse one end of the milk
hose in the cleaning solution
✻Immerse the length of the
remaining milk hose in the
cleaning solution
This procedure prevents air
bubbles from remaining in the
milk hose.
✻Place all parts of combi spout
in the cleaning solution
(3parts)
All parts must be completely
immersed in the cleaning
solution.
CInstructions
Foamer cleaning:
for intermediate milk system cleaning, see “Milk system cleaning”.
Manual combi spout cleaning without Plug&Clean:
perform at least once per day.
Manual combi spout cleaning with Plug&Clean:
perform at least once per week.
After Plug&Clean cleaning:
the cleaned milk hose can be stored with the adapter in the closed
cooler.
✻After 5hours, rinse all combi
spout and milk hose parts
If amixer is fitted:
✻Rinse mixer hose very
thoroughly
✻Reassemble combi spout
✻Replace combi spout
✻Insert milk hose
If amixer is fitted:
✻Insert mixer hose